LT1055ACH - 16V/us Precision JFET Op Amp | Analog Devices
料号: LT1055ACH ✓ 量产中LT1055ACH 概述
An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages while providing high open-loop gain. The LT1055ACH belongs to the precision JFET-input operational-amplifier family, combining low input bias current with substantially higher speed than many conventional precision amplifiers. This combination makes it useful for instrumentation, sensor conditioning, buffer, and signal-processing circuits that must preserve weak signals without introducing excessive bias error.
Key performance features include a guaranteed maximum offset voltage of 150 uV, a guaranteed maximum drift of 4 uV/°C, and guaranteed input bias current of 150 pA at 70°C and 2.5 nA at 125°C. The simultaneous availability of 16 V/us slew rate and 6.5 MHz gain-bandwidth product distinguishes the LT1055 from slower precision JFET amplifiers. These characteristics support accurate amplification of signals containing both low-level DC information and higher-frequency content.
The LT1055/LT1056 family combines precision specifications with high-speed performance. Its JFET input stage supports low-current measurements, while its offset and drift characteristics improve DC accuracy in instrumentation chains. The 16 V/us slew rate allows the amplifier to respond quickly to moderate-amplitude signal changes without imposing the slew-rate limits associated with many precision-only amplifiers.
Typical uses include low-level transducer conditioning, buffered sensor outputs, laboratory instrumentation, photodiode amplifiers, audio and communication signal paths, active filters, and analog measurement systems. The TO-5 package provides a conventional through-hole mechanical format suitable for instrumentation equipment and designs requiring a metal-can package rather than a surface-mount outline.
When designing around the LT1055ACH, use the manufacturer's pinout and connection guidance to preserve the common JFET-input configuration and provide appropriate output-load isolation. Input and feedback networks should be arranged to minimize parasitic capacitance and leakage, particularly when measuring currents in the picoamp range. Verify operating supply range, input common-mode limits, output swing, and thermal performance against the manufacturer datasheet before releasing the design.
This page combines the manufacturer's published performance figures with practical selection guidance, drop-in family information, application-oriented design notes, and a parameter comparison for engineers evaluating the LT1055ACH in precision analog signal chains.
直接替换替代料: LT1055ACH ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: LT1055ACH (相同外形与封装尺寸) ——差异在于 Amplifier Type, Mounting Type, Package, Slew Rate, Typical Input Offset Voltage.
LT1055ACH 最大额定值与电气特性
| Amplifier Type | Single operational amplifier |
| Input Transistor Type | JFET |
| Number of Circuits | 1 circuit |
| Slew Rate | 16 V/us |
| Gain-Bandwidth Product | 6.5 MHz |
| Typical Input Offset Voltage | 50 uV |
| Maximum Input Offset Voltage | 150 uV |
| Typical Input Offset Voltage Drift | 1.2 uV/°C |
| Maximum Input Offset Voltage Drift | 4 uV/°C |
| Typical Input Bias Current at 70°C | 40 pA |
| Typical Input Bias Current at 125°C | 500 pA |
| Guaranteed Input Bias Current at 70°C | 150 pA maximum |
| Guaranteed Input Bias Current at 125°C | 2.5 nA maximum |
| 封装 | TO-5 metal-can package |
| 安装类型 | Through-hole |
| RoHS 状态 | unknown |
| REACH Status | unknown |
LT1055ACH to-5 metal-can package 引脚配置指南
LT1055ACH(to-5 metal-can package 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: LT1055ACH.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LT1055ACH 适用于 6 应用s: Precision Transducer Signal Conditioning, High-Impedance Current Detection, Laboratory Instrumentation Buffer, Photodiode Amplifier, Active Filter and Signal Conditioning, Audio and Communication Signal Path.
Precision Transducer Signal Conditioning
The LT1055ACH fits low-level transducer conditioning because its input offset voltage is typically 50 uV, maximum guaranteed offset is 150 uV, and input bias current is typically 40 pA at 70°C. Place it in a noninverting or differential gain stage to preserve sensor accuracy without introducing excessive DC error. The 16 V/us slew rate also allows the same amplifier to reproduce moderate-frequency sensor signals while retaining the precision characteristics needed for calibration. Feedback resistors should be selected for the intended gain, and the input network should minimize leakage and contamination on high-impedance nodes.
推荐
High-Impedance Current Detection
The LT1055ACH is appropriate for current-to-voltage detection stages that place the amplifier across a high-value sense resistor. Its input bias current of 40 pA typical at 70°C produces substantially less error than a higher-bias general-purpose amplifier, while the guaranteed 150 pA limit at 70°C provides a defined upper bound for error budgeting. The 6.5 MHz gain-bandwidth product supports bandwidth beyond static current measurements. Keep the sense-resistor terminals and amplifier input traces short, guard sensitive nodes where appropriate, and verify that leakage in the PCB and connectors does not dominate the measurement.
推荐
Laboratory Instrumentation Buffer
The LT1055ACH can buffer laboratory sources and sensor outputs where both DC accuracy and transient response matter. Its 50 uV typical offset and 1.2 uV/°C typical drift reduce calibration movement, while 16 V/us slew rate handles output steps more effectively than a slow precision amplifier. Configure it as a unity-gain voltage follower only when stability and capacitive-load requirements are satisfied, or add a conventional feedback network for gain and bandwidth control. Low-noise grounding, short feedback loops, and careful supply decoupling are essential when the buffered signal feeds precision converters or measurement instruments.
推荐
Photodiode Amplifier
The LT1055ACH is suitable for photodiode current amplification because its JFET input stage provides low bias current and its input offset voltage is limited to 150 uV maximum. Use the amplifier with a transimpedance feedback resistor and diode capacitance compensation appropriate to the selected feedback resistance. The 6.5 MHz gain-bandwidth product provides meaningful bandwidth for moderate-speed optical signals, and the 16 V/us slew rate improves response to transient photocurrent changes. Guard against photodiode or feedback-resistor leakage, keep input traces short, and account for the added feedback capacitance required to maintain stability.
推荐
Active Filter and Signal Conditioning
The LT1055ACH can implement active filters that require low input bias, low offset, and more bandwidth than conventional precision-only amplifiers. Its 6.5 MHz gain-bandwidth product and 16 V/us slew rate support signal processing across audio and low-frequency instrumentation ranges. Use the manufacturer's recommended noise-gain arrangement to maintain stability, particularly with photodiode, cable, or sensor capacitance at the input. Because offset drift and bias current increase with temperature, include the 4 uV/°C maximum drift and 2.5 nA maximum bias current at 125°C in worst-case error budgets before tightening the usable measurement range.
推荐
Audio and Communication Signal Path
The LT1055ACH is applicable to audio and communication signal paths where low input bias and accurate small-signal reproduction are important. Its 16 V/us slew rate reduces large-signal distortion compared with amplifiers optimized only for offset accuracy, and its 6.5 MHz gain-bandwidth product supports a broad low-frequency signal range. In a practical implementation, use stable feedback components and ensure the source impedance does not create excessive noise-gain peaking. Keep the input and output return paths compact, decouple supply rails near the device, and verify output swing and load behavior against the manufacturer limits for the selected gain and supply voltage.
推荐
推荐产品汇总
工程参考数据: LT1055ACH ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | LT1056ACH |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | TO-5 | TO-5 |
| Amplifier Type | Single JFET-input operational amplifier | Single JFET-input operational amplifier |
| Slew Rate | 16 V/us | 16 V/us |
| Gain-Bandwidth Product | 6.5 MHz | 6.5 MHz |
关键差异点
- Combines precision offset with high-speed operation (对比 LT1056ACH)
- Low temperature-dependent input bias current (对比 LT1056ACH)
- TO-5 format supports traditional instrumentation hardware (对比 LT1056ACH)
设计说明
Do not treat the LT1055 and LT1056 family descriptions as a complete substitute qualification. Compare the exact LT1055ACH and LT1056ACH rows in the manufacturer electrical tables, including supply voltage, input common-mode range, output swing, guaranteed offset, drift, bias current, and temperature limits. Confirm the TO-5 pin configuration before releasing any substitution to production.
Keep the op-amp input and feedback paths short, and place the feedback resistor or capacitor directly across the relevant device pins. High-impedance inputs are sensitive to surface leakage, contamination, and guard coupling. Use a clean guard around sensitive nodes when measuring picoamp-level currents, and avoid routing high-impedance signals next to switching nodes or digital clock lines.
Use the manufacturer's stability guidance when driving capacitive loads or connecting long shielded cables. The 6.5 MHz gain-bandwidth product and 16 V/us slew rate provide substantial speed, but high-speed feedback layouts can still form unintended poles. Keep the loop area small, place compensation elements at the appropriate pins, and test the completed board across its intended supply and load ranges.
Decouple each supply connection close to the device and verify that the selected supply remains inside the device's operating limits under transient conditions. The LT1055ACH is a linear amplifier, so its power dissipation depends on supply voltage, output voltage, quiescent current, and load current. Check the TO-5 thermal limitations with the intended copper area and ambient temperature rather than assuming metal-can construction eliminates thermal constraints.
合规信息
The available product information does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this general-purpose precision operational amplifier.