LT1498IS8 - 10MHz Dual Precision Op Amp | Analog Devices
MPN: LT1498IS8 ✓ 啟用中LT1498IS8 概覽
An operational amplifier is an amplifier IC that uses very high open-loop gain to control an analog signal. The LT1498 belongs to the precision operational amplifier, voltage-feedback amplifier, analog signal-conditioning IC, and broader semiconductor hierarchies. Its rail-to-rail input stage accepts signals near either supply rail, while the rail-to-rail output stage can swing close to the output limits under suitable load conditions.
The principal features include a 10 MHz gain-bandwidth product, a 6 V/us slew rate, dual-amplifier construction, precision C-Load capability, and rail-to-rail input and output operation. These characteristics make the LT1498IS8 suitable for sensor interfaces, audio paths, ADC and DAC drivers, active filters, and general-purpose instrumentation where a conventional single-supply amplifier cannot accommodate signals near its positive supply rail.
The 10 MHz gain-bandwidth product supports useful closed-loop bandwidth above the audio range, while the 6 V/us slew rate improves large-signal response. Precision C-Load operation reduces the likelihood of instability when driving isolated capacitive loads. However, the exact stability network and load limits must be selected using the application circuit and recommendations in the manufacturer datasheet rather than inferred from generic amplifier practice.
Typical applications include buffering sensor outputs, driving mixed-signal converters, amplifying audio signals, active filtering, and providing precision gain in test and measurement equipment. In a ±15 V instrumentation system, its dual amplifier architecture supplies two independent channels in one package, reducing board area when both channels are required.
Designers should verify input common-mode range, output swing, capacitive-load stability, noise, offset, and supply-current requirements for the operating conditions. Place input, feedback, and decoupling connections to minimize parasitic capacitance, and route output currents away from sensitive input nodes to limit crosstalk and unintended feedback.
直接替換替代品,適用於 LT1498IS8 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
LT1498IS8#PBF
✅ 直接替換📋 參考替代品(不在目錄中)
LT1498IS8#TR
✅ 直接替換📋 參考替代品(不在目錄中)
LT1498IS8#TRPBF
✅ 直接替換📋 參考替代品(不在目錄中)
LT1498CS8#PBF
✅ 直接替換📋 參考替代品(不在目錄中)
LT1498CN8
✅ 直接替換📋 參考替代品(不在目錄中)
LT1498IS8 最大額定值與電氣特性
| Amplifier Type | Dual precision operational amplifier |
| Number of Amplifiers | 2 channels |
| Gain-Bandwidth Product | 10 MHz |
| Slew Rate | 6 V/us |
| Input Common-Mode Range | Rail-to-rail input |
| 輸出類型 | Rail-to-rail output |
| Capacitive Load Capability | Precision C-Load operation |
| Supply Voltage Range | 2.2 V to 15 V |
| Supported Supply Configuration | ±15 V / 30 V total |
| 封裝 | 8-pin SOIC |
| 安裝類型 | Surface mount |
LT1498IS8 8-pin soic 腳位配置指南
LT1498IS8(8-pin soic 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: LT1498IS8.
請參閱 資料表 以查看完整腳位配置。
典型應用
LT1498IS8 適用於 6 應用s: ADC Front-End Signal Conditioning, Precision Active Filtering, Audio Signal Buffering, Sensor Signal Conditioning, DAC Output Buffering, Industrial Instrumentation.
ADC Front-End Signal Conditioning
The LT1498IS8 fits between a sensor or analog front end and a high-resolution ADC because its rail-to-rail input stage accepts signals across most of the 2.2 V to 15 V supply range. The 10 MHz gain-bandwidth product provides bandwidth for moderate-gain conditioning, while the 6 V/us slew rate supports fast input transitions. Precision C-Load operation can simplify interfacing to sampling nodes, although the converter's drive and settling requirements must still be verified. Use short feedback paths, place the amplifier near the ADC, and decouple the supply rail to minimize acquisition error and high-frequency coupling.
推薦
Precision Active Filtering
The LT1498IS8 is appropriate for precision active filters requiring more bandwidth and slew-rate margin than a conventional micropower amplifier. Its 10 MHz gain-bandwidth product allows several closed-loop bandwidth choices around audio or low-frequency instrumentation ranges, and the 6 V/us slew rate improves behavior when the filter must process larger signals. Rail-to-rail input and output operation improves signal utilization at low supply voltages. Select resistor and capacitor values for the intended gain and bandwidth, and verify phase margin and capacitive loading using the manufacturer's application guidance before finalizing the filter response.
推薦
Audio Signal Buffering
The LT1498IS8 can buffer dual audio channels while retaining useful small- and large-signal bandwidth. Its 10 MHz gain-bandwidth product is substantially above the audio band, and the 6 V/us slew rate provides margin for high-amplitude waveforms without requiring an oversized output stage for basic buffering. Rail-to-rail input and output operation is valuable in single-supply equipment where the signal approaches either rail. Choose the channel assignment and external gain structure carefully, maintain short output routing to downstream stages, and check the loaded output-voltage limits at the selected supply voltage.
推薦
Sensor Signal Conditioning
The LT1498IS8 is well matched to sensor interfaces that require rail-to-rail input behavior and more precision bandwidth than a basic general-purpose op amp. The dual circuit permits conditioning of two sensors or a differential signal path, while the 10 MHz gain-bandwidth product supports moderate closed-loop gains and the 6 V/us slew rate improves transient response. Its capacitive-load behavior can also simplify connection to sampling or multiplexing stages. Confirm sensor output range, input bias-current requirements, and grounding arrangement, then place the device close to the source to minimize noise pickup and unwanted common-mode conversion.
推薦
DAC Output Buffering
The LT1498IS8 can serve as the output buffer for a DAC when the converter requires a low-impedance drive, rail-to-rail signal range, and controlled settling. Its 10 MHz gain-bandwidth product offers substantially more loop bandwidth than the audio or instrumentation signals commonly carried by the DAC, while the 6 V/us slew rate handles larger transient edges. Precision C-Load capability is useful when the DAC includes an isolation network or capacitive output structure. Keep the buffer's feedback loop compact, verify the DAC output range against the amplifier supply, and confirm that any required output filtering does not create excessive capacitive loading.
推薦
Industrial Instrumentation
The LT1498IS8 suits instrumentation modules that need to process bipolar or ground-referenced sensor signals while also supporting a wide supply range. Its rail-to-rail input stage improves usable input range, the dual-channel configuration can reduce board area for measurement chains, and the 10 MHz gain-bandwidth product handles faster diagnostics than a slow precision-only amplifier. The 6 V/us slew rate supports signal steps without the severe bandwidth penalty of a very low-power implementation. Use careful grounding and supply partitioning, avoid routing output and digital signals together, and validate the complete channel for the intended common-mode, noise, and calibration requirements.
推薦
推薦產品摘要
工程參考資料,適用於 LT1498IS8 — 比較、設計指引及合規資訊。
選型指南
Choose LT1498IS8#PBF for a new lead-free assembly when its documented electrical ratings and ordering conditions match the design. LT1498IS8#TR or LT1498IS8#TRPBF may serve existing assembly or logistics requirements while retaining the same core ratings. Consider LT1498CS8#PBF or LT1498CN8 only after checking their temperature-grade requirements and obtaining the authoritative ordering information. No cross-brand candidate is recommended because the available cross-reference information does not establish a pin-compatible part that also preserves the 10 MHz bandwidth, 6 V/us slew rate, rail-to-rail behavior, and C-Load capability.
與替代品比較
| 參數 | 本產品 | LT1498IS8#PBF | LT1498IS8#TR | LT1498IS8#TRPBF | LT1498CS8#PBF | LT1498CN8 |
|---|---|---|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC - same | 8-pin SOIC - same | 8-pin SOIC - same | 8-pin SOIC - same | 8-pin SOIC - same |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Amplifier Count | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Gain-Bandwidth Product | 10 MHz | 10 MHz | 10 MHz | 10 MHz | 10 MHz | 10 MHz |
| Slew Rate | 6 V/us | 6 V/us | 6 V/us | 6 V/us | 6 V/us | 6 V/us |
| Supply Voltage Range | 2.2 V to 15 V | 2.2 V to 15 V | 2.2 V to 15 V | 2.2 V to 15 V | 2.2 V to 15 V | 2.2 V to 15 V |
| Input Common-Mode Range | Rail-to-rail input | Rail-to-rail input | Rail-to-rail input | Rail-to-rail input | Rail-to-rail input | Rail-to-rail input |
| Output Type | Rail-to-rail output | Rail-to-rail output | Rail-to-rail output | Rail-to-rail output | Rail-to-rail output | Rail-to-rail output |
| Capacitive Load Capability | Precision C-Load operation | Precision C-Load operation | Precision C-Load operation | Precision C-Load operation | Precision C-Load operation | Precision C-Load operation |
| Supported Supply Configuration | ±15 V / 30 V total | ±15 V / 30 V total | ±15 V / 30 V total | ±15 V / 30 V total | ±15 V / 30 V total | ±15 V / 30 V total |
主要差異化特點
- Higher bandwidth than a general-purpose dual rail-to-rail amplifier (對比LT1498IS8#PBF)
- Precision C-Load operation (對比LT1498IS8#TR)
- Dual rail-to-rail precision channels in an 8-pin SOIC (對比LT1498CS8#PBF)
設計說明
Do not assume that every generic 8-pin dual rail-to-rail amplifier is electrically interchangeable with the LT1498IS8. A valid replacement must reproduce the 10 MHz gain-bandwidth product, 6 V/us slew rate, supply range, rail-to-rail input and output behavior, and precision C-Load capability. Check the complete pin description table, especially exposed-pad connections and dual-channel polarity, before substituting an ordering code or manufacturer.
Place the amplifier close to the source or converter it serves, and keep feedback resistors and input nodes compact. Route each channel to minimize overlap with the other channel's output path, particularly when one amplifier drives an ADC and the other handles a clock or control signal. Place supply-decoupling capacitance at the device pins and use a low-impedance ground return to reduce supply ripple, clock feedthrough, and common-mode conversion.
Treat the LT1498IS8 as a bandwidth-sensitive precision amplifier even when the intended signal occupies a much lower frequency. The 10 MHz gain-bandwidth product and 6 V/us slew rate can expose parasitic capacitance that would be unimportant in a slow amplifier. Keep feedback loops small, avoid long stubs, and confirm capacitive-load stability for the actual gain, output filter, and external load using the manufacturer application guidance.
合規資訊
The lead-free LT1498IS8#PBF ordering designation is documented, but separate RoHS, REACH, halogen-free, and conflict-minerals statements are not present in the manufacturer product excerpts. The LT1498IS8 is an industrial analog amplifier rather than an AEC-Q100-qualified automotive device.