MAX232AEUE+ - 5V RS-232 Transceiver | Analog Devices
MPN: MAX232AEUE+ ✓ 啟用中MAX232AEUE+ 概覽
An RS-232 transceiver is an interface IC that combines line drivers and line receivers with the charge-pump circuitry required to generate the positive and negative voltages used by RS-232 ports. A transmitter converts logic-level signals into RS-232 levels, while a receiver converts RS-232 inputs back into logic levels. The MAX232AEUE+ therefore provides a complete point-to-point or multipoint serial interface in one device rather than requiring separate driver and receiver components.
The principal configuration is two transmit channels and two receive channels, allowing two serial directions or four available driver or receiver channels when only unidirectional operation is required. Because it is a full RS-232 implementation rather than an RS-422 or RS-485 interface, designers must account for RS-232 voltage levels, grounding, cable length, transient exposure, and point-to-point communication topology when planning the port. The exact driver and receiver data rates, loopback behavior, input levels, and shutdown characteristics should be confirmed from the MAX232A manufacturer datasheet.
The MAX232AEUE+ uses the MAX232A family's integrated charge-pump approach to develop the bipolar voltage swings required by RS-232 without requiring a separate negative supply. This internal arrangement reduces the external support circuitry relative to a discrete transmitter implementation, although charge-pump capacitors and interface protection still require careful layout. As a 5 V interface IC, it is designed to connect CMOS or TTL-level digital circuitry to an RS-232 port through appropriate signal conditioning and protection.
Typical applications include programming and configuration ports in embedded instruments, industrial control modules, laboratory data loggers, point-of-sale equipment, and serial adapters. Two transmitter and two receiver channels also support mirrored communication links or multiple RS-232 lines when the system architecture permits. For short-distance point-to-point links, the device can form the central electrical interface between a host UART and a remote peripheral, with grounding and surge protection handled at the connector.
PCB placement should minimize trace length between the MAX232AEUE+, its charge-pump capacitors, and the protection network at the RS-232 connector. Keep the interface return path continuous, use a suitable ground reference, and place transient-protection devices close to the connector. Confirm the pinout, capacitor values, and recommended layout directly in the manufacturer datasheet before fabrication because the exact connector and protection topology depend on cable exposure.
This product page combines the exact MAX232AEUE+ ordering information with the verified 16-pin TSSOP package, 4.5 V to 5.5 V operating range, production status, and package-level drop-in comparison. It also organizes procurement, replacement, application, and design guidance so engineers can evaluate the transceiver before committing a board layout.
直接替換替代品,適用於 MAX232AEUE+ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MAX232AEUE+ (相同外形與佔位) — 差異在於 Interface Standard, Product Type, Number of Receivers, Package, Number of Drivers.
MAX232AEUE+T
✅ 直接替換聯絡詢價
查看資料表 →MAX232AEUE
✅ 直接替換📋 參考替代品(不在目錄中)
MAX232AEUE+ 規格
| Device Type | RS-232 transceiver |
| Number of Drivers | 2 drivers |
| Number of Receivers | 2 receivers |
| Interface Standard | Full RS-232 |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Nominal Supply Voltage | +5 V |
| 封裝 | 16-pin TSSOP |
| Total Pin Count | 16 pins |
| 安裝類型 | Surface mount |
| Production Status | Production |
| RoHS 狀態 | Compliant |
MAX232AEUE+ 16-pin tssop 腳位配置指南
MAX232AEUE+(16-pin tssop 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MAX232AEUE+.
請參閱 資料表 以查看完整腳位配置。
典型應用
MAX232AEUE+ 適用於 6 應用s: Embedded Instrument Configuration Port, Industrial Controller Serial Link, Laboratory Data Logger, Point-of-Sale Terminal Interface, Point-to-Point Communication Bridge, Service and Maintenance Interface.
Embedded Instrument Configuration Port
The MAX232AEUE+ is appropriate for a compact configuration interface between an embedded controller and a service terminal. Its 2 drivers and 2 receivers provide two bidirectional RS-232 channels, while the 16-pin TSSOP occupies less board area than a larger through-hole interface. The 4.5 V to 5.5 V operating range matches a +5 V control system. Place the transceiver close to the connector, route the UART signals to the host, and add external transient protection because the transceiver itself does not remove the need for a robust cable interface.
推薦
Industrial Controller Serial Link
The MAX232AEUE+ can serve as the RS-232 interface on a compact industrial controller with a 5 V logic supply. Two transmitter channels support separate control and status paths, while two receiver channels accept commands or sensor data. Its 2/2 arrangement covers common full-duplex serial-port architectures without requiring separate line-driver ICs. For factory equipment, route the connector through protection components, maintain a suitable signal-ground relationship, and verify the device temperature grade against the enclosure environment.
推薦
Laboratory Data Logger
A laboratory data logger can use the MAX232AEUE+ to connect a host computer to a remote measurement or instrument-control port. The dual driver and receiver structure permits a bidirectional command channel plus an additional data path, and the TSSOP-16 package leaves board area for sensing and signal-conditioning circuits. Operating from 4.5 V to 5.5 V simplifies integration with a nominal 5 V system. Keep the RS-232 traces short and controlled, provide a continuous ground return, and use connector-side protection for cables that leave the instrument.
推薦
Point-of-Sale Terminal Interface
The MAX232AEUE+ fits point-of-sale equipment that must communicate with a host, printer, scanner, or service computer through RS-232. Its 2/2 channel arrangement allows a primary host port and a second serial link when the equipment architecture needs one. The +5 V supply range and 16-pin TSSOP footprint support compact controller boards. Confirm the required baud rate, logic levels, and cable distance against the manufacturer data sheet, and place protection components near the external connector rather than allowing cable transients to reach the transceiver.
推薦
Point-to-Point Communication Bridge
The MAX232AEUE+ is useful in a small communication bridge that translates 5 V logic-level UART signals to RS-232 and back. The 2 transmitters and 2 receivers allow a pair of links or a command-and-data arrangement, while the integrated transceiver simplifies the implementation compared with separate line-driver and receiver packages. Its TSSOP-16 construction supports dense bridge hardware. Use a point-to-point cable topology, provide a common ground where appropriate, and validate the maximum data rate and receiver thresholds from the MAX232A manufacturer data sheet.
推薦
Service and Maintenance Interface
The MAX232AEUE+ can provide a dedicated service port on embedded equipment where technicians connect a laptop or maintenance controller. Two receivers allow the service channel to coexist with another inbound status channel, and two drivers support outbound commands and responses. The small TSSOP package is advantageous in sealed or space-constrained products. Design the connector interface with transient suppression, ensure accessible chassis or signal grounding, and consider isolation if the connected equipment can develop large ground-potential differences.
推薦
推薦產品摘要
工程參考資料,適用於 MAX232AEUE+ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MAX232AEUE+T | MAX232AEUE |
|---|---|---|---|
| Package | TSSOP-16 | TSSOP-16 | TSSOP-16 |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Transmitter Channels | 2 drivers | 2 drivers | 2 drivers |
| Receiver Channels | 2 receivers | 2 receivers | 2 receivers |
| Interface Standard | Full RS-232 | Full RS-232 | Full RS-232 |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Nominal Supply | +5 V | +5 V | +5 V |
| Total Pin Count | 16 pins | 16 pins | 16 pins |
| Production Status | Production | Production family listing | Production family listing |
主要差異化特點
- Combines two drivers and two receivers in one compact interface (對比MAX232AEUE+T)
- Exact MAX232AEUE+ ordering identity (對比MAX232AEUE)
- Surface-mount TSSOP implementation (對比MAX232ID)
設計說明
Place the MAX232AEUE+ and its charge-pump capacitors close to the transceiver pins, following the manufacturer’s recommended component-placement diagram. Keep the charge-pump loop compact to limit switching noise and maintain predictable operation. Route UART-side traces away from RS-232 connector and protection components, and provide a solid ground plane beneath the interface area where the board stack-up permits it.
Do not treat the MAX232AEUE+ as a surge-protection device. A cable-connected RS-232 port can expose the transceiver to transients and ground-potential differences, so place suitable protection at the connector and verify its voltage and capacitance ratings. Also verify the exact pin names and capacitor connections in the MAX232A manufacturer data sheet; connector-side protection and on-chip charge-pump circuitry serve different purposes.
Keep the RS-232 traces physically separated from clocks, switching-power nodes, and sensitive analog inputs to reduce crosstalk. Maintain a reliable signal-ground return between connected equipment, and use a ground strategy appropriate to the installation when large ground offsets are possible. Confirm the supported data rate and cable length in the manufacturer documentation before treating the interface as a long-distance or high-rate link.
合規資訊
The exact MAX232AEUE+ listing identifies the TSSOP-16 device as RoHS compliant. No manufacturer statement for REACH, AEC-Q100, halogen-free status, or conflict-minerals compliance was established.