MAX232AEUE+ - 5V RS-232 Transceiver | Analog Devices
N.º de pieza: MAX232AEUE+ ✓ ActivoMAX232AEUE+ Descripción general
An RS-232 transceiver is an interface IC that combines line drivers and line receivers with the charge-pump circuitry required to generate the positive and negative voltages used by RS-232 ports. A transmitter converts logic-level signals into RS-232 levels, while a receiver converts RS-232 inputs back into logic levels. The MAX232AEUE+ therefore provides a complete point-to-point or multipoint serial interface in one device rather than requiring separate driver and receiver components.
The principal configuration is two transmit channels and two receive channels, allowing two serial directions or four available driver or receiver channels when only unidirectional operation is required. Because it is a full RS-232 implementation rather than an RS-422 or RS-485 interface, designers must account for RS-232 voltage levels, grounding, cable length, transient exposure, and point-to-point communication topology when planning the port. The exact driver and receiver data rates, loopback behavior, input levels, and shutdown characteristics should be confirmed from the MAX232A manufacturer datasheet.
The MAX232AEUE+ uses the MAX232A family's integrated charge-pump approach to develop the bipolar voltage swings required by RS-232 without requiring a separate negative supply. This internal arrangement reduces the external support circuitry relative to a discrete transmitter implementation, although charge-pump capacitors and interface protection still require careful layout. As a 5 V interface IC, it is designed to connect CMOS or TTL-level digital circuitry to an RS-232 port through appropriate signal conditioning and protection.
Typical applications include programming and configuration ports in embedded instruments, industrial control modules, laboratory data loggers, point-of-sale equipment, and serial adapters. Two transmitter and two receiver channels also support mirrored communication links or multiple RS-232 lines when the system architecture permits. For short-distance point-to-point links, the device can form the central electrical interface between a host UART and a remote peripheral, with grounding and surge protection handled at the connector.
PCB placement should minimize trace length between the MAX232AEUE+, its charge-pump capacitors, and the protection network at the RS-232 connector. Keep the interface return path continuous, use a suitable ground reference, and place transient-protection devices close to the connector. Confirm the pinout, capacitor values, and recommended layout directly in the manufacturer datasheet before fabrication because the exact connector and protection topology depend on cable exposure.
This product page combines the exact MAX232AEUE+ ordering information with the verified 16-pin TSSOP package, 4.5 V to 5.5 V operating range, production status, and package-level drop-in comparison. It also organizes procurement, replacement, application, and design guidance so engineers can evaluate the transceiver before committing a board layout.
Alternativas directas para MAX232AEUE+ — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MAX232AEUE+ (mismo factor de forma y huella) — difiere en Interface Standard, Product Type, Number of Receivers, Package, Number of Drivers.
MAX232AEUE+T
✅ Sustitución directaConsulte el precio
Ver hoja de datos →MAX232AEUE
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MAX232AEUE+ Especificaciones
| Device Type | RS-232 transceiver |
| Number of Drivers | 2 drivers |
| Number of Receivers | 2 receivers |
| Interface Standard | Full RS-232 |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Nominal Supply Voltage | +5 V |
| Encapsulado | 16-pin TSSOP |
| Total Pin Count | 16 pins |
| Tipo de montaje | Surface mount |
| Production Status | Production |
| Estado RoHS | Compliant |
Guía de configuración de pines de MAX232AEUE+ 16-pin tssop
Configuración de pines para MAX232AEUE+ (encapsulado 16-pin tssop). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para MAX232AEUE+.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MAX232AEUE+ es adecuado para 6 aplicacións: Embedded Instrument Configuration Port, Industrial Controller Serial Link, Laboratory Data Logger, Point-of-Sale Terminal Interface, Point-to-Point Communication Bridge, Service and Maintenance Interface.
Embedded Instrument Configuration Port
The MAX232AEUE+ is appropriate for a compact configuration interface between an embedded controller and a service terminal. Its 2 drivers and 2 receivers provide two bidirectional RS-232 channels, while the 16-pin TSSOP occupies less board area than a larger through-hole interface. The 4.5 V to 5.5 V operating range matches a +5 V control system. Place the transceiver close to the connector, route the UART signals to the host, and add external transient protection because the transceiver itself does not remove the need for a robust cable interface.
Recomendado
Industrial Controller Serial Link
The MAX232AEUE+ can serve as the RS-232 interface on a compact industrial controller with a 5 V logic supply. Two transmitter channels support separate control and status paths, while two receiver channels accept commands or sensor data. Its 2/2 arrangement covers common full-duplex serial-port architectures without requiring separate line-driver ICs. For factory equipment, route the connector through protection components, maintain a suitable signal-ground relationship, and verify the device temperature grade against the enclosure environment.
Recomendado
Laboratory Data Logger
A laboratory data logger can use the MAX232AEUE+ to connect a host computer to a remote measurement or instrument-control port. The dual driver and receiver structure permits a bidirectional command channel plus an additional data path, and the TSSOP-16 package leaves board area for sensing and signal-conditioning circuits. Operating from 4.5 V to 5.5 V simplifies integration with a nominal 5 V system. Keep the RS-232 traces short and controlled, provide a continuous ground return, and use connector-side protection for cables that leave the instrument.
Recomendado
Point-of-Sale Terminal Interface
The MAX232AEUE+ fits point-of-sale equipment that must communicate with a host, printer, scanner, or service computer through RS-232. Its 2/2 channel arrangement allows a primary host port and a second serial link when the equipment architecture needs one. The +5 V supply range and 16-pin TSSOP footprint support compact controller boards. Confirm the required baud rate, logic levels, and cable distance against the manufacturer data sheet, and place protection components near the external connector rather than allowing cable transients to reach the transceiver.
Recomendado
Point-to-Point Communication Bridge
The MAX232AEUE+ is useful in a small communication bridge that translates 5 V logic-level UART signals to RS-232 and back. The 2 transmitters and 2 receivers allow a pair of links or a command-and-data arrangement, while the integrated transceiver simplifies the implementation compared with separate line-driver and receiver packages. Its TSSOP-16 construction supports dense bridge hardware. Use a point-to-point cable topology, provide a common ground where appropriate, and validate the maximum data rate and receiver thresholds from the MAX232A manufacturer data sheet.
Recomendado
Service and Maintenance Interface
The MAX232AEUE+ can provide a dedicated service port on embedded equipment where technicians connect a laptop or maintenance controller. Two receivers allow the service channel to coexist with another inbound status channel, and two drivers support outbound commands and responses. The small TSSOP package is advantageous in sealed or space-constrained products. Design the connector interface with transient suppression, ensure accessible chassis or signal grounding, and consider isolation if the connected equipment can develop large ground-potential differences.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MAX232AEUE+ — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MAX232AEUE+T | MAX232AEUE |
|---|---|---|---|
| Package | TSSOP-16 | TSSOP-16 | TSSOP-16 |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Transmitter Channels | 2 drivers | 2 drivers | 2 drivers |
| Receiver Channels | 2 receivers | 2 receivers | 2 receivers |
| Interface Standard | Full RS-232 | Full RS-232 | Full RS-232 |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Nominal Supply | +5 V | +5 V | +5 V |
| Total Pin Count | 16 pins | 16 pins | 16 pins |
| Production Status | Production | Production family listing | Production family listing |
Diferenciadores clave
- Combines two drivers and two receivers in one compact interface (frente a MAX232AEUE+T)
- Exact MAX232AEUE+ ordering identity (frente a MAX232AEUE)
- Surface-mount TSSOP implementation (frente a MAX232ID)
Notas de diseño
Place the MAX232AEUE+ and its charge-pump capacitors close to the transceiver pins, following the manufacturer’s recommended component-placement diagram. Keep the charge-pump loop compact to limit switching noise and maintain predictable operation. Route UART-side traces away from RS-232 connector and protection components, and provide a solid ground plane beneath the interface area where the board stack-up permits it.
Do not treat the MAX232AEUE+ as a surge-protection device. A cable-connected RS-232 port can expose the transceiver to transients and ground-potential differences, so place suitable protection at the connector and verify its voltage and capacitance ratings. Also verify the exact pin names and capacitor connections in the MAX232A manufacturer data sheet; connector-side protection and on-chip charge-pump circuitry serve different purposes.
Keep the RS-232 traces physically separated from clocks, switching-power nodes, and sensitive analog inputs to reduce crosstalk. Maintain a reliable signal-ground return between connected equipment, and use a ground strategy appropriate to the installation when large ground offsets are possible. Confirm the supported data rate and cable length in the manufacturer documentation before treating the interface as a long-distance or high-rate link.
Información de cumplimiento
The exact MAX232AEUE+ listing identifies the TSSOP-16 device as RoHS compliant. No manufacturer statement for REACH, AEC-Q100, halogen-free status, or conflict-minerals compliance was established.