MAX3232EESE+T - 1Mbps RS-232 Transceiver | Maxim Integrated
MPN: MAX3232EESE+T ✓ 啟用中MAX3232EESE+T 概覽
A true RS-232 transceiver belongs to the interface IC category and converts logic-level UART signals between a host controller and a RS-232 port. The MAX3232EESE+T integrates two line drivers, two line receivers, and a dual charge-pump circuit. This integration allows the device to generate the positive and negative voltages required by RS-232 while operating from a single low-voltage supply.
The principal features include a 3.0V to 5.5V operating range, operation at data rates up to 1Mbps, and low supply consumption down to 10nA for the MAX3232E family. The E version adds ±15kV ESD protection according to the Analog Devices product page. Four external 0.1µF charge-pump capacitors support the internal voltage-conversion circuit without requiring a large external power-supply network.
The MAX3232E device is designed around the EIA/TIA-232-F interface requirements and is identified as a production product by Analog Devices. Its dual charge-pump architecture maintains compatible RS-232 voltage levels without a separate bipolar supply. The 16-SOIC package also makes the MAX3232EESE+T suitable for conventional surface-mount assembly and board-space-constrained serial-port designs.
Typical applications include RS-232 ports for industrial equipment, test and measurement instruments, point-of-sale terminals, data-acquisition systems, and embedded control products. The two-driver, two-receiver arrangement supports bidirectional communication, while the single 3.0V to 5.5V supply simplifies connection to modern low-voltage UART controllers.
Layout should prioritize short traces for the charge-pump capacitors and maintain the manufacturer-specified capacitor values and polarity. The external capacitors must connect close to their designated pins, and the RS-232 connector interface should be isolated from sensitive analog or high-speed digital paths to minimize noise pickup.
This page combines the exact MAX3232EESE+T interface specifications with package guidance, application selection, verified source links, and engineering-focused comparisons. These details help designers distinguish electrical alternatives from genuine pin-compatible SOIC-16 replacements before updating an existing RS-232 design.
直接替換替代品,適用於 MAX3232EESE+T — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MAX3232EESE+T (相同外形與佔位) — 差異在於 ESD Protection, Maximum Data Rate, Supply Voltage Range, Package, Product Type.
MAX3232ECSE+
✅ 直接替換聯絡詢價
查看資料表 →MAX3232ECDR
✅ 直接替換聯絡詢價
查看資料表 →MAX3232ECDWR
✅ 直接替換聯絡詢價
查看資料表 →MAX3232ECDBR
✅ 直接替換聯絡詢價
查看資料表 →MAX3232ESE+
✅ 直接替換聯絡詢價
查看資料表 →MAX3232EESE+T 規格
| Transceiver Configuration | 2 driver / 2 receiver |
| 介面類型 | Full RS-232 transceiver |
| Supply Voltage Range | 3.0V to 5.5V |
| Maximum Data Rate | 1Mbps |
| Low-Power Shutdown Current | 10nA maximum |
| ESD Protection | ±15kV |
| 封裝 | 16-SOIC |
| 腳位數 | 16 pins |
| 安裝類型 | Surface mount |
| Charge-Pump Capacitors | 4 × 0.1µF |
| Integrated Charge-Pump Circuit | Dual charge-pump circuit |
| RS-232 Standards | EIA/TIA-232-F |
| V-Series Compatibility | V.28 and V.24 |
| Production Status | Production |
| Operating Supply Current | 300µA |
MAX3232EESE+T 16-soic 腳位配置指南
MAX3232EESE+T(16-soic 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MAX3232EESE+T.
請參閱 資料表 以查看完整腳位配置。
典型應用
MAX3232EESE+T 適用於 6 應用s: Industrial RS-232 Control Interface, Test and Measurement Instrument, Point-of-Sale Terminal, Data Acquisition System, Embedded Service Interface, Portable Serial Adapter.
Industrial RS-232 Control Interface
The MAX3232EESE+T fits industrial control equipment that requires a compact, standard RS-232 connection from a low-voltage UART controller. Its 3.0V to 5.5V supply range accommodates common 3.3V and 5V control logic, while the two-driver, two-receiver arrangement supports bidirectional command and status exchange. Operation up to 1Mbps provides margin for high-throughput instruments and legacy automation equipment. The ±15kV ESD protection specified for the MAX3232E family improves interface resilience, although the completed machine still needs appropriate enclosure, grounding, and cable protection. A single low-voltage supply and the integrated dual charge pump simplify the RS-232 power architecture without requiring a separate bipolar rail.
推薦
Test and Measurement Instrument
The MAX3232EESE+T is appropriate for portable and bench test equipment that communicates with a host PC or controller over RS-232. The 16-SOIC package limits board area, and the 3.0V to 5.5V operating range supports both legacy 5V instrument electronics and newer 3.3V control boards. Its low-power operation is useful in portable systems, while the up-to-1Mbps rate can accommodate high-volume measurement data or firmware transfer. The integrated charge pump reduces the number of external power components, leaving board area for signal conditioning and input protection. In laboratory environments where cables are frequently handled, the MAX3232E family's ±15kV ESD protection adds an important interface-level safeguard.
推薦
Point-of-Sale Terminal
The MAX3232EESE+T can provide the legacy RS-232 link used by point-of-sale terminals, scales, printers, and related peripherals. Its 2/2 transceiver configuration supports both transmission and reception on one compact device, and the 3.0V to 5.5V supply range simplifies integration with mixed 3.3V and 5V electronics. The integrated charge-pump circuitry eliminates the need for a separate RS-232 voltage converter. For commercial equipment, low power helps control system heat, while the 16-SOIC package supports dense, automated surface-mount assembly. The MAX3232E family's ±15kV ESD protection is particularly relevant when service personnel connect removable or external cables, although the connector still requires correct signal routing and chassis grounding.
推薦
Data Acquisition System
The MAX3232EESE+T is well suited to data-acquisition modules that send measurements to a host computer through a legacy serial port. The up-to-1Mbps capability allows the UART and cable to operate at elevated baud rates when the source data requires it. Two receivers and two drivers provide enough channels for a typical bidirectional command-and-data link, and the single 3.0V to 5.5V supply simplifies system power design. Its 16-SOIC footprint leaves board space for amplifiers, analog-to-digital converters, and isolation components. The ±15kV ESD protection of the MAX3232E family helps protect the interface when the acquisition enclosure is connected to external equipment or operator-accessible cabling.
推薦
Embedded Service Interface
The MAX3232EESE+T can implement a maintenance or service port on embedded industrial equipment while keeping the normal user interface isolated from the RS-232 circuitry. Its low-voltage operation runs directly from common embedded rails, and the two-driver, two-receiver architecture permits command, response, status, and diagnostic flows. The low-power MAX3232E architecture is beneficial in unattended equipment, while the 16-SOIC package supports compact daughterboards and service headers. The integrated dual charge pump requires only four external 0.1µF capacitors, reducing assembly complexity. When the service connector is accessible outside the enclosure, maintain short protected routes and route the connector return appropriately to limit ground potential differences and ESD exposure.
推薦
Portable Serial Adapter
The MAX3232EESE+T is suitable for compact serial adapters that add an RS-232 port to a modern embedded controller. Its operation from 3.0V to 5.5V supports low-voltage single-board computers and USB-to-serial equipment, while the up-to-1Mbps rate offers compatibility with fast legacy peripherals. The 16-SOIC package is easy to place beside a DB connector or screw terminal, and low-power operation is valuable in battery-powered or USB-powered adapters. The MAX3232E family's ±15kV ESD protection supports connections to external equipment that may be exposed to electrostatic discharge. The adapter should still include suitable connector protection and verify the UART logic levels separately from the RS-232 line levels.
推薦
推薦產品摘要
工程參考資料,適用於 MAX3232EESE+T — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MAX3232ECSE+ | MAX3232ECDR | MAX3232ECDWR | MAX3232ECDBR | MAX3232ESE+ |
|---|---|---|---|---|---|---|
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated |
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Transceiver Configuration | 2 driver / 2 receiver | 2 driver / 2 receiver | 2 driver / 2 receiver | 2 driver / 2 receiver | 2 driver / 2 receiver | 2 driver / 2 receiver |
| RS-232 Standard | EIA/TIA-232-F | EIA/TIA-232-F family | EIA/TIA-232-F family | EIA/TIA-232-F family | EIA/TIA-232-F family | EIA/TIA-232-F family |
主要差異化特點
- Single-supply RS-232 operation (對比MAX3232ESE+)
- Integrated two-channel interface (對比MAX3232ECDR)
- Compact charge-pump implementation (對比MAX3232ECDWR)
設計說明
Place all four 0.1µF charge-pump capacitors close to their associated MAX3232E pins. Keep the capacitor loops compact and follow the polarity and connection topology in the manufacturer datasheet. Long charge-pump traces increase radiated and susceptibility effects, particularly near clocks, displays, or long RS-232 connector routes. Confirm the capacitor dielectric and DC-voltage rating against the manufacturer's component recommendations.
Keep the RS-232 connector, protected line drivers, and receiver inputs away from sensitive analog inputs and high-speed digital traces. Provide a direct chassis or signal-ground path according to the equipment's EMC strategy, and avoid sharing narrow ground paths with switching regulators or display converters. Route the UART logic-side traces separately from the connector-side RS-232 signals to minimize coupling and ground bounce.
Do not treat the MAX3232E as a direct TTL UART connection: its logic-side pins and RS-232 connector-side pins have different voltage levels and functions. Verify every signal against the 16-pin datasheet before layout because an incorrect driver, receiver, charge-pump, or supply connection can damage the interface. Also avoid substituting a narrow-SOIC variant solely by pin count when the land pattern dimensions differ.
合規資訊
The Analog Devices MAX3232E product page confirms ±15kV ESD protection and production status. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product documentation.