Maxim Integrated

MAX3232EESE+T - 1Mbps RS-232 Transceiver | Maxim Integrated

Teilenummer: MAX3232EESE+T ✓ Aktiv
3.0V to 5.5V Vdss 10nA maximum Id EIA/TIA-232-F Rds(on) 16-SOIC Package
MOQ: 1 |

MAX3232EESE+T Übersicht

The Maxim Integrated MAX3232EESE+T is a 3.0V to 5.5V, low-power RS-232 transceiver with two drivers and two receivers in a 16-pin SOIC package. It supports data rates up to 1Mbps and provides true RS-232 operation for portable equipment, industrial controls, and other systems requiring a compact asynchronous serial interface.

A true RS-232 transceiver belongs to the interface IC category and converts logic-level UART signals between a host controller and a RS-232 port. The MAX3232EESE+T integrates two line drivers, two line receivers, and a dual charge-pump circuit. This integration allows the device to generate the positive and negative voltages required by RS-232 while operating from a single low-voltage supply.

The principal features include a 3.0V to 5.5V operating range, operation at data rates up to 1Mbps, and low supply consumption down to 10nA for the MAX3232E family. The E version adds ±15kV ESD protection according to the Analog Devices product page. Four external 0.1µF charge-pump capacitors support the internal voltage-conversion circuit without requiring a large external power-supply network.

The MAX3232E device is designed around the EIA/TIA-232-F interface requirements and is identified as a production product by Analog Devices. Its dual charge-pump architecture maintains compatible RS-232 voltage levels without a separate bipolar supply. The 16-SOIC package also makes the MAX3232EESE+T suitable for conventional surface-mount assembly and board-space-constrained serial-port designs.

Typical applications include RS-232 ports for industrial equipment, test and measurement instruments, point-of-sale terminals, data-acquisition systems, and embedded control products. The two-driver, two-receiver arrangement supports bidirectional communication, while the single 3.0V to 5.5V supply simplifies connection to modern low-voltage UART controllers.

Layout should prioritize short traces for the charge-pump capacitors and maintain the manufacturer-specified capacitor values and polarity. The external capacitors must connect close to their designated pins, and the RS-232 connector interface should be isolated from sensitive analog or high-speed digital paths to minimize noise pickup.

This page combines the exact MAX3232EESE+T interface specifications with package guidance, application selection, verified source links, and engineering-focused comparisons. These details help designers distinguish electrical alternatives from genuine pin-compatible SOIC-16 replacements before updating an existing RS-232 design.

Drop-in-Alternativen für MAX3232EESE+T – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit MAX3232EESE+T (gleiche Bauform und Footprint) – abweichend in ESD Protection, Maximum Data Rate, Supply Voltage Range, Package, Product Type.

Texas Instruments
Supply Voltage Range: 3 V to 5.5 V
Package: 16-SSOP (DB, 0.209 in / 5.30 mm width)
Vergleichen mit MAX3232EESE+T →
Texas Instruments
ESD Protection: ±15 kV IEC ESD protection
Maximum Data Rate: 250 kbps
Supply Voltage Range: 3 V to 5.5 V
Vergleichen mit MAX3232EESE+T →
Texas Instruments
ESD Protection: ±15 kV IEC pin-to-pin
Supply Voltage Range: 3 V to 5.5 V
Package: 16-pin SOIC
Vergleichen mit MAX3232EESE+T →
Analog Devices
ESD Protection: ±15 kV IEC on serial-port pins
Maximum Data Rate: 1 Mbps
Supply Voltage Range: 3.0 V to 5.5 V
Vergleichen mit MAX3232EESE+T →
Analog Devices
ESD Protection: ±15 kV
Maximum Data Rate: 1 Mbps
Supply Voltage Range: 3.0 V to 5.5 V
Vergleichen mit MAX3232EESE+T →
Analog Devices
Maximum Data Rate: Up to 1 Mbps
Supply Voltage Range: 3.0 V to 5.5 V
Vergleichen mit MAX3232EESE+T →

MAX3232ECSE+

✅ Drop-In
Analog Devices
📦 16-SOIC
2 transmitters and 2 receivers · True RS-232 · 3.0 V to 5.5 V · 1 Mbps · 4 x 0.1 uF · 16 pins · 16-SOIC · Surface mount

Preis auf Anfrage

Datenblatt ansehen →

MAX3232ECDR

✅ Drop-In
Texas Instruments
📦 16-SOIC
Dual RS-232 line driver and receiver · 2 channels · 3 V to 5.5 V · 250 kbps · ±15 kV IEC ESD protection · RS-232 · 2 transmit and 2 receive functions · 16-pin SOIC

Preis auf Anfrage

Datenblatt ansehen →

MAX3232ECDWR

✅ Drop-In
Texas Instruments
📦 16-SOIC
RS-232 line-driver and receiver transceiver · 3 V to 5.5 V · 2 · 2 · RS-232 · TIA/EIA-232-F · ±15 kV IEC pin-to-pin · Integrated dual charge pump

Preis auf Anfrage

Datenblatt ansehen →

MAX3232ECDBR

✅ Drop-In
Texas Instruments
📦 16-SOIC
RS-232 · Transceiver · 2 · 2 · 3 V to 5.5 V · 250 kbps (minimum) · ±15 kV (HBM) · ±15 kV contact discharge / ±15 kV air-gap discharge

Preis auf Anfrage

Datenblatt ansehen →

MAX3232ESE+

✅ Drop-In
Analog Devices
📦 16-SOIC
RS-232 transceiver · 2 · 2 · 3.0 V to 5.5 V · Up to 1 Mbps · RS-232 · 16-pin SOIC

Preis auf Anfrage

Datenblatt ansehen →

MAX3232EESE+T Technische Daten

Transceiver Configuration 2 driver / 2 receiver
Schnittstellentyp Full RS-232 transceiver
Supply Voltage Range 3.0V to 5.5V
Maximum Data Rate 1Mbps
Low-Power Shutdown Current 10nA maximum
ESD Protection ±15kV
Gehäuse 16-SOIC
Pin-Anzahl 16 pins
Montageart Surface mount
Charge-Pump Capacitors 4 × 0.1µF
Integrated Charge-Pump Circuit Dual charge-pump circuit
RS-232 Standards EIA/TIA-232-F
V-Series Compatibility V.28 and V.24
Production Status Production
Operating Supply Current 300µA

MAX3232EESE+T 16-soic Pinbelegungsleitfaden

Pinbelegung für MAX3232EESE+T (16-soic-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für MAX3232EESE+T im 16-soic-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für MAX3232EESE+T.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

MAX3232EESE+T ist geeignet für 6 Anwendungs: Industrial RS-232 Control Interface, Test and Measurement Instrument, Point-of-Sale Terminal, Data Acquisition System, Embedded Service Interface, Portable Serial Adapter.

🏭

Industrial RS-232 Control Interface

The MAX3232EESE+T fits industrial control equipment that requires a compact, standard RS-232 connection from a low-voltage UART controller. Its 3.0V to 5.5V supply range accommodates common 3.3V and 5V control logic, while the two-driver, two-receiver arrangement supports bidirectional command and status exchange. Operation up to 1Mbps provides margin for high-throughput instruments and legacy automation equipment. The ±15kV ESD protection specified for the MAX3232E family improves interface resilience, although the completed machine still needs appropriate enclosure, grounding, and cable protection. A single low-voltage supply and the integrated dual charge pump simplify the RS-232 power architecture without requiring a separate bipolar rail.

🖥️

Test and Measurement Instrument

The MAX3232EESE+T is appropriate for portable and bench test equipment that communicates with a host PC or controller over RS-232. The 16-SOIC package limits board area, and the 3.0V to 5.5V operating range supports both legacy 5V instrument electronics and newer 3.3V control boards. Its low-power operation is useful in portable systems, while the up-to-1Mbps rate can accommodate high-volume measurement data or firmware transfer. The integrated charge pump reduces the number of external power components, leaving board area for signal conditioning and input protection. In laboratory environments where cables are frequently handled, the MAX3232E family's ±15kV ESD protection adds an important interface-level safeguard.

🖥️

Point-of-Sale Terminal

The MAX3232EESE+T can provide the legacy RS-232 link used by point-of-sale terminals, scales, printers, and related peripherals. Its 2/2 transceiver configuration supports both transmission and reception on one compact device, and the 3.0V to 5.5V supply range simplifies integration with mixed 3.3V and 5V electronics. The integrated charge-pump circuitry eliminates the need for a separate RS-232 voltage converter. For commercial equipment, low power helps control system heat, while the 16-SOIC package supports dense, automated surface-mount assembly. The MAX3232E family's ±15kV ESD protection is particularly relevant when service personnel connect removable or external cables, although the connector still requires correct signal routing and chassis grounding.

🌐

Data Acquisition System

The MAX3232EESE+T is well suited to data-acquisition modules that send measurements to a host computer through a legacy serial port. The up-to-1Mbps capability allows the UART and cable to operate at elevated baud rates when the source data requires it. Two receivers and two drivers provide enough channels for a typical bidirectional command-and-data link, and the single 3.0V to 5.5V supply simplifies system power design. Its 16-SOIC footprint leaves board space for amplifiers, analog-to-digital converters, and isolation components. The ±15kV ESD protection of the MAX3232E family helps protect the interface when the acquisition enclosure is connected to external equipment or operator-accessible cabling.

🔧

Embedded Service Interface

The MAX3232EESE+T can implement a maintenance or service port on embedded industrial equipment while keeping the normal user interface isolated from the RS-232 circuitry. Its low-voltage operation runs directly from common embedded rails, and the two-driver, two-receiver architecture permits command, response, status, and diagnostic flows. The low-power MAX3232E architecture is beneficial in unattended equipment, while the 16-SOIC package supports compact daughterboards and service headers. The integrated dual charge pump requires only four external 0.1µF capacitors, reducing assembly complexity. When the service connector is accessible outside the enclosure, maintain short protected routes and route the connector return appropriately to limit ground potential differences and ESD exposure.

🔧

Portable Serial Adapter

The MAX3232EESE+T is suitable for compact serial adapters that add an RS-232 port to a modern embedded controller. Its operation from 3.0V to 5.5V supports low-voltage single-board computers and USB-to-serial equipment, while the up-to-1Mbps rate offers compatibility with fast legacy peripherals. The 16-SOIC package is easy to place beside a DB connector or screw terminal, and low-power operation is valuable in battery-powered or USB-powered adapters. The MAX3232E family's ±15kV ESD protection supports connections to external equipment that may be exposed to electrostatic discharge. The adapter should still include suitable connector protection and verify the UART logic levels separately from the RS-232 line levels.

What is the MAX3232EESE+T?
The MAX3232EESE+T is a Maxim Integrated 2-driver, 2-receiver, full RS-232 transceiver designed for low-voltage equipment. According to the Analog Devices MAX3232E product page, it operates from 3.0V to 5.5V, supports data rates up to 1Mbps, and includes ±15kV ESD protection. The device is packaged in a 16-pin SOIC and integrates a dual charge-pump circuit.
What is the operating voltage of MAX3232EESE+T?
The MAX3232EESE+T operates from 3.0V to 5.5V. The Mouser product listing identifies this supply range, while the Analog Devices MAX3232E family is described as a low-voltage true RS-232 solution. This range allows connection to both 3.3V and 5V system rails without requiring a separate bipolar RS-232 supply.
What is the maximum data rate of MAX3232EESE+T?
The MAX3232EESE+T supports data rates up to 1Mbps. The Mouser listing states the maximum rate directly, and the Analog Devices MAX3232E product page identifies the family as an up-to-1Mbps true RS-232 transceiver. This rate is suitable for conventional asynchronous serial links where the UART, cable, and connector also support the selected baud rate.
Where can I download the MAX3232EESE+T datasheet PDF?
The official MAX3232E datasheet and product information are available on the Analog Devices MAX3232E product page. The listed MAX3232EESE+T ordering code identifies the same 16-SOIC family variant used for industrial, telecommunications, and computer peripheral applications. Use the manufacturer datasheet for the definitive pin description, capacitor values, and electrical characteristics.
Where can I find the MAX3232EESE+T pinout?
The MAX3232EESE+T pinout is published in the Maxim MAX3232E manufacturer datasheet, whose official product page is linked on this page. The exact pin names and numbering should be taken from the 16-SOIC pin-description table because charge-pump capacitor polarity and logic-side signal assignments are critical during PCB layout and assembly.
Is MAX3232EESE+T the same as MAX3232ESE+?
The MAX3232EESE+T and MAX3232ESE+ identify the same MAX3232E electrical family and 16-SOIC configuration, with the added +T code specifying the manufacturer's tape-and-reel ordering option. The DigiKey listings identify both as 2/2 full RS-232 transceivers in 16-SOIC packages. Confirm the reel orientation and moisture-handling requirements before treating them as interchangeable production orders.
What is the best drop-in replacement for MAX3232EESE+T?
The MAX3232ECSE+ is a practical same-manufacturer drop-in candidate for a 16-SOIC MAX3232E design when its operating and ESD requirements meet the application. The Analog Devices MAX3232E page states that MAX3232E-family devices are pin, package, and functionally compatible with the industry-standard MAX232. Confirm capacitor values, enable behavior, and production availability before releasing a substitution.
Can MAX3232ECDR replace MAX3232EESE+T?
The MAX3232ECDR can serve as a candidate replacement because it belongs to the MAX3232E interface family and is available in a 16-pin SOIC configuration. The Analog Devices MAX3232E page identifies the MAX3232E as compatible with the industry-standard MAX232 electrically and physically. A production substitution still requires checking operating current, shutdown behavior, ESD rating, and exact SOIC dimensions.
When should I choose MAX3232EESE+T over MAX3232ESE+?
Choose the MAX3232EESE+T when the assembly process requires the manufacturer's +T tape-and-reel presentation; otherwise, the MAX3232ESE+ offers the same listed MAX3232E family and 16-SOIC electrical configuration. Both listings identify 2/2 full RS-232 transceivers operating from 3.0V to 5.5V. The choice should follow the approved BOM format and supplier packaging requirement.
Is MAX3232EESE+T suitable for industrial RS-232 equipment?
The MAX3232EESE+T is suitable for many industrial RS-232 interfaces because it combines a 3.0V to 5.5V supply range, operation up to 1Mbps, and ±15kV ESD protection according to the Analog Devices MAX3232E product page. Industrial qualification still depends on the complete assembly, enclosure, cabling, grounding, surge protection, and required temperature range.
How much power does the MAX3232EESE+T use?
The MAX3232EESE+T is specified as a low-power RS-232 transceiver, with shutdown current down to 10nA for the MAX3232E family. A comparison source identifies operating supply current as 300µA for the MAX3232EESE+T. Actual board consumption depends on supply voltage, operating mode, UART activity, external capacitor leakage, and the connected system load.
Does MAX3232EESE+T require external RS-232 charge-pump capacitors?
Yes, the MAX3232E family uses four external 0.1µF capacitors to support its dual charge-pump circuit. The Maxim MAX3232E documentation identifies this capacitor arrangement. Place the capacitors close to their designated IC pins with the polarity shown in the manufacturer application diagram, and retain the specified ceramic type and voltage rating for reliable charge-pump operation.
Where can I buy MAX3232EESE+T online?
Use the Request a Quote form on this page to request availability, packaging, and a current quotation for the MAX3232EESE+T. The manufacturer product page identifies the MAX3232E family as a production product, while authorized-channel listings show the exact 16-SOIC ordering code. The form is the appropriate route for current commercial confirmation.
What is the price of MAX3232EESE+T?
Current commercial pricing for the MAX3232EESE+T is provided through the Request a Quote form on this page. The exact ordering code is listed by multiple authorized channels as a 2/2 full RS-232 transceiver in a 16-SOIC package. Submit the required quantity, reel format, and target region so the quotation can reflect current supply and packaging requirements.
What is the lead time for MAX3232EESE+T?
The current lead time for MAX3232EESE+T should be confirmed through the Request a Quote form on this page. The Analog Devices product page identifies MAX3232E as a production family, but production status alone does not guarantee a fixed lead time or a particular stock quantity. Include your scheduled assembly date and acceptable quantity breaks in the request.
Is MAX3232EESE+T in stock?
Current MAX3232EESE+T stock should be confirmed with the Request a Quote form on this page. Manufacturer and authorized-channel records identify the part as a production MAX3232E-family device, but live inventory varies by package, reel quantity, and region. Provide the required order quantity and target date to obtain an actionable availability response.
What are the key specifications of MAX3232EESE+T that engineers should know?
The key MAX3232EESE+T specifications are a 3.0V to 5.5V supply range, two RS-232 drivers, two receivers, operation up to 1Mbps, and ±15kV ESD protection. It uses a 16-SOIC package, a dual charge-pump architecture, and four external 0.1µF capacitors. Analog Devices identifies the MAX3232E family as a production low-power true RS-232 transceiver.

Technische Referenzdaten für MAX3232EESE+T – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the MAX3232EESE+T when a design needs a two-driver, two-receiver RS-232 interface operating from 3.0V to 5.5V at rates up to 1Mbps and requires the +T tape-and-reel ordering option. Its MAX3232E family provides ±15kV ESD protection and uses four external 0.1µF charge-pump capacitors. The MAX3232ESE+ is the closest electrical choice when reel orientation is not a constraint. The MAX3232ECSE+, MAX3232ECDR, MAX3232ECDWR, and MAX3232ECDBR are same-family 16-SOIC candidates for inventory or lifecycle planning, but their exact operating current, ESD rating, package dimensions, and capacitor configuration must be checked before release. For a design requiring more than two drivers or two receivers, choose a multi-channel MAX3243-family device instead. Verify the final footprint, pin assignments, UART logic levels, ESD strategy, and connector grounding against the manufacturer datasheet before production approval.

Vergleich mit Alternativen

Parameter Dieses Produkt MAX3232ECSE+ MAX3232ECDR MAX3232ECDWR MAX3232ECDBR MAX3232ESE+
Brand Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Transceiver Configuration 2 driver / 2 receiver 2 driver / 2 receiver 2 driver / 2 receiver 2 driver / 2 receiver 2 driver / 2 receiver 2 driver / 2 receiver
RS-232 Standard EIA/TIA-232-F EIA/TIA-232-F family EIA/TIA-232-F family EIA/TIA-232-F family EIA/TIA-232-F family EIA/TIA-232-F family

Wichtigste Unterscheidungsmerkmale

  • Single-supply RS-232 operation (vs. MAX3232ESE+)
  • Integrated two-channel interface (vs. MAX3232ECDR)
  • Compact charge-pump implementation (vs. MAX3232ECDWR)

Designhinweise

Place all four 0.1µF charge-pump capacitors close to their associated MAX3232E pins. Keep the capacitor loops compact and follow the polarity and connection topology in the manufacturer datasheet. Long charge-pump traces increase radiated and susceptibility effects, particularly near clocks, displays, or long RS-232 connector routes. Confirm the capacitor dielectric and DC-voltage rating against the manufacturer's component recommendations.

Keep the RS-232 connector, protected line drivers, and receiver inputs away from sensitive analog inputs and high-speed digital traces. Provide a direct chassis or signal-ground path according to the equipment's EMC strategy, and avoid sharing narrow ground paths with switching regulators or display converters. Route the UART logic-side traces separately from the connector-side RS-232 signals to minimize coupling and ground bounce.

Do not treat the MAX3232E as a direct TTL UART connection: its logic-side pins and RS-232 connector-side pins have different voltage levels and functions. Verify every signal against the 16-pin datasheet before layout because an incorrect driver, receiver, charge-pump, or supply connection can damage the interface. Also avoid substituting a narrow-SOIC variant solely by pin count when the land pattern dimensions differ.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The Analog Devices MAX3232E product page confirms ±15kV ESD protection and production status. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product documentation.

Ähnliche Suchanfragen

MAX3232EESE+T datasheet MAX3232EESE+T pinout MAX3232EESE+T datasheet pdf MAX3232EESE+T equivalent MAX3232EESE+T replacement MAX3232EESE+T cross reference MAX3232EESE+T vs MAX3232ESE+ MAX3232EESE+T SOIC-16 RS-232 MAX3232EESE+T 3.0V 5.5V MAX3232EESE+T 1Mbps Maxim Integrated MAX3232EESE+T MAX3232EESE+T price MAX3232EESE+T stock MAX3232EESE+T industrial RS-232

Verwandte Bauteile & Begriffe

Maxim Integrated Analog Devices MAX3232EESE+T MAX3232ESE+ MAX3232ECSE+ MAX3232ECDR MAX3232ECDWR MAX3232ECDBR RS-232 transceiver interface IC line driver line receiver UART interface dual charge-pump circuit true RS-232 EIA/TIA-232-F V.28 V.24 ESD protection 16-SOIC SOIC family surface-mount technology industrial control test and measurement
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen