MAX3232EESE+T - 1Mbps RS-232 Transceiver | Maxim Integrated
MPN: MAX3232EESE+T ✓ सक्रियMAX3232EESE+T अवलोकन
A true RS-232 transceiver belongs to the interface IC category and converts logic-level UART signals between a host controller and a RS-232 port. The MAX3232EESE+T integrates two line drivers, two line receivers, and a dual charge-pump circuit. This integration allows the device to generate the positive and negative voltages required by RS-232 while operating from a single low-voltage supply.
The principal features include a 3.0V to 5.5V operating range, operation at data rates up to 1Mbps, and low supply consumption down to 10nA for the MAX3232E family. The E version adds ±15kV ESD protection according to the Analog Devices product page. Four external 0.1µF charge-pump capacitors support the internal voltage-conversion circuit without requiring a large external power-supply network.
The MAX3232E device is designed around the EIA/TIA-232-F interface requirements and is identified as a production product by Analog Devices. Its dual charge-pump architecture maintains compatible RS-232 voltage levels without a separate bipolar supply. The 16-SOIC package also makes the MAX3232EESE+T suitable for conventional surface-mount assembly and board-space-constrained serial-port designs.
Typical applications include RS-232 ports for industrial equipment, test and measurement instruments, point-of-sale terminals, data-acquisition systems, and embedded control products. The two-driver, two-receiver arrangement supports bidirectional communication, while the single 3.0V to 5.5V supply simplifies connection to modern low-voltage UART controllers.
Layout should prioritize short traces for the charge-pump capacitors and maintain the manufacturer-specified capacitor values and polarity. The external capacitors must connect close to their designated pins, and the RS-232 connector interface should be isolated from sensitive analog or high-speed digital paths to minimize noise pickup.
This page combines the exact MAX3232EESE+T interface specifications with package guidance, application selection, verified source links, and engineering-focused comparisons. These details help designers distinguish electrical alternatives from genuine pin-compatible SOIC-16 replacements before updating an existing RS-232 design.
के लिए ड्रॉप-इन विकल्प MAX3232EESE+T — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MAX3232EESE+T (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न ESD Protection, Maximum Data Rate, Supply Voltage Range, Package, Product Type.
MAX3232ECSE+
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →MAX3232ECDR
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →MAX3232ECDWR
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →MAX3232ECDBR
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →MAX3232ESE+
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →MAX3232EESE+T विशेषताएं
| Transceiver Configuration | 2 driver / 2 receiver |
| इंटरफ़ेस प्रकार | Full RS-232 transceiver |
| Supply Voltage Range | 3.0V to 5.5V |
| Maximum Data Rate | 1Mbps |
| Low-Power Shutdown Current | 10nA maximum |
| ESD Protection | ±15kV |
| पैकेज | 16-SOIC |
| पिन काउंट | 16 pins |
| माउंटिंग प्रकार | Surface mount |
| Charge-Pump Capacitors | 4 × 0.1µF |
| Integrated Charge-Pump Circuit | Dual charge-pump circuit |
| RS-232 Standards | EIA/TIA-232-F |
| V-Series Compatibility | V.28 and V.24 |
| Production Status | Production |
| Operating Supply Current | 300µA |
MAX3232EESE+T 16-soic पिन कॉन्फ़िगरेशन गाइड
MAX3232EESE+T (16-soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MAX3232EESE+T.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
MAX3232EESE+T के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial RS-232 Control Interface, Test and Measurement Instrument, Point-of-Sale Terminal, Data Acquisition System, Embedded Service Interface, Portable Serial Adapter.
Industrial RS-232 Control Interface
The MAX3232EESE+T fits industrial control equipment that requires a compact, standard RS-232 connection from a low-voltage UART controller. Its 3.0V to 5.5V supply range accommodates common 3.3V and 5V control logic, while the two-driver, two-receiver arrangement supports bidirectional command and status exchange. Operation up to 1Mbps provides margin for high-throughput instruments and legacy automation equipment. The ±15kV ESD protection specified for the MAX3232E family improves interface resilience, although the completed machine still needs appropriate enclosure, grounding, and cable protection. A single low-voltage supply and the integrated dual charge pump simplify the RS-232 power architecture without requiring a separate bipolar rail.
अनुशंसित
Test and Measurement Instrument
The MAX3232EESE+T is appropriate for portable and bench test equipment that communicates with a host PC or controller over RS-232. The 16-SOIC package limits board area, and the 3.0V to 5.5V operating range supports both legacy 5V instrument electronics and newer 3.3V control boards. Its low-power operation is useful in portable systems, while the up-to-1Mbps rate can accommodate high-volume measurement data or firmware transfer. The integrated charge pump reduces the number of external power components, leaving board area for signal conditioning and input protection. In laboratory environments where cables are frequently handled, the MAX3232E family's ±15kV ESD protection adds an important interface-level safeguard.
अनुशंसित
Point-of-Sale Terminal
The MAX3232EESE+T can provide the legacy RS-232 link used by point-of-sale terminals, scales, printers, and related peripherals. Its 2/2 transceiver configuration supports both transmission and reception on one compact device, and the 3.0V to 5.5V supply range simplifies integration with mixed 3.3V and 5V electronics. The integrated charge-pump circuitry eliminates the need for a separate RS-232 voltage converter. For commercial equipment, low power helps control system heat, while the 16-SOIC package supports dense, automated surface-mount assembly. The MAX3232E family's ±15kV ESD protection is particularly relevant when service personnel connect removable or external cables, although the connector still requires correct signal routing and chassis grounding.
अनुशंसित
Data Acquisition System
The MAX3232EESE+T is well suited to data-acquisition modules that send measurements to a host computer through a legacy serial port. The up-to-1Mbps capability allows the UART and cable to operate at elevated baud rates when the source data requires it. Two receivers and two drivers provide enough channels for a typical bidirectional command-and-data link, and the single 3.0V to 5.5V supply simplifies system power design. Its 16-SOIC footprint leaves board space for amplifiers, analog-to-digital converters, and isolation components. The ±15kV ESD protection of the MAX3232E family helps protect the interface when the acquisition enclosure is connected to external equipment or operator-accessible cabling.
अनुशंसित
Embedded Service Interface
The MAX3232EESE+T can implement a maintenance or service port on embedded industrial equipment while keeping the normal user interface isolated from the RS-232 circuitry. Its low-voltage operation runs directly from common embedded rails, and the two-driver, two-receiver architecture permits command, response, status, and diagnostic flows. The low-power MAX3232E architecture is beneficial in unattended equipment, while the 16-SOIC package supports compact daughterboards and service headers. The integrated dual charge pump requires only four external 0.1µF capacitors, reducing assembly complexity. When the service connector is accessible outside the enclosure, maintain short protected routes and route the connector return appropriately to limit ground potential differences and ESD exposure.
अनुशंसित
Portable Serial Adapter
The MAX3232EESE+T is suitable for compact serial adapters that add an RS-232 port to a modern embedded controller. Its operation from 3.0V to 5.5V supports low-voltage single-board computers and USB-to-serial equipment, while the up-to-1Mbps rate offers compatibility with fast legacy peripherals. The 16-SOIC package is easy to place beside a DB connector or screw terminal, and low-power operation is valuable in battery-powered or USB-powered adapters. The MAX3232E family's ±15kV ESD protection supports connections to external equipment that may be exposed to electrostatic discharge. The adapter should still include suitable connector protection and verify the UART logic levels separately from the RS-232 line levels.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा MAX3232EESE+T — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | MAX3232ECSE+ | MAX3232ECDR | MAX3232ECDWR | MAX3232ECDBR | MAX3232ESE+ |
|---|---|---|---|---|---|---|
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated |
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Transceiver Configuration | 2 driver / 2 receiver | 2 driver / 2 receiver | 2 driver / 2 receiver | 2 driver / 2 receiver | 2 driver / 2 receiver | 2 driver / 2 receiver |
| RS-232 Standard | EIA/TIA-232-F | EIA/TIA-232-F family | EIA/TIA-232-F family | EIA/TIA-232-F family | EIA/TIA-232-F family | EIA/TIA-232-F family |
मुख्य विशेषताएँ
- Single-supply RS-232 operation (बनामMAX3232ESE+)
- Integrated two-channel interface (बनामMAX3232ECDR)
- Compact charge-pump implementation (बनामMAX3232ECDWR)
डिज़ाइन नोट्स
Place all four 0.1µF charge-pump capacitors close to their associated MAX3232E pins. Keep the capacitor loops compact and follow the polarity and connection topology in the manufacturer datasheet. Long charge-pump traces increase radiated and susceptibility effects, particularly near clocks, displays, or long RS-232 connector routes. Confirm the capacitor dielectric and DC-voltage rating against the manufacturer's component recommendations.
Keep the RS-232 connector, protected line drivers, and receiver inputs away from sensitive analog inputs and high-speed digital traces. Provide a direct chassis or signal-ground path according to the equipment's EMC strategy, and avoid sharing narrow ground paths with switching regulators or display converters. Route the UART logic-side traces separately from the connector-side RS-232 signals to minimize coupling and ground bounce.
Do not treat the MAX3232E as a direct TTL UART connection: its logic-side pins and RS-232 connector-side pins have different voltage levels and functions. Verify every signal against the 16-pin datasheet before layout because an incorrect driver, receiver, charge-pump, or supply connection can damage the interface. Also avoid substituting a narrow-SOIC variant solely by pin count when the land pattern dimensions differ.
अनुपालन जानकारी
The Analog Devices MAX3232E product page confirms ±15kV ESD protection and production status. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product documentation.