MAX232ECPWR - 250kbps RS-232 Transceiver | Texas Instruments (Tape & Reel)
MPN: MAX232ECPWR ✓ 啟用中MAX232ECPWR 概覽
An RS-232 transceiver is an interface IC that connects low-voltage TTL or CMOS logic to the bipolar voltage levels used by RS-232 equipment. The driver channels convert logic signals into RS-232 output levels, while the receiver channels convert incoming RS-232 signals into logic-compatible levels. A MAX232E-family device also contains a charge-pump voltage generator, allowing bipolar RS-232 levels to be produced from a single 5V supply.
The MAX232ECPWR combines two transmit channels, two receive channels, and electrostatic-discharge protection in one compact 16-TSSOP package. Its stated 250kbps rate suits short-distance point-to-point serial links, including industrial-control equipment, data-acquisition systems, service interfaces, and legacy computer peripherals. The integrated protection improves robustness in connector-adjacent circuits where electrostatic discharge is a realistic concern.
Technically, the MAX232ECPWR is designed for a single 5V supply and combines its charge-pump circuitry, drivers, and receivers in one interface device. The dual-driver and dual-receiver arrangement supports two independent RS-232 directions on a point-to-point link. Its 250kbps maximum signaling rate is substantially faster than conventional asynchronous RS-232 links, although cable length, capacitance, grounding, and driver loading still determine achievable communication distance.
Typical uses include programmable-logic-controller service ports, industrial serial adapters, instrumentation control links, embedded-system debug connections, and communications between equipment with legacy DB9 or equivalent RS-232 ports. The MAX232ECPWR is particularly appropriate where a compact surface-mount implementation and protected RS-232 line interface are required without a separate external protection network.
PCB design should follow the capacitor and charge-pump requirements in the manufacturer datasheet, because the voltage generator depends on correctly sized charge-pump capacitors. Keep the RS-232 connector-side traces away from sensitive logic, provide a low-impedance ground reference, and place input and charge-pump capacitors close to their associated pins.
This product page combines the MAX232ECPWR electrical characteristics, package information, compatible alternatives, application guidance, and practical design notes to support faster component selection and PCB implementation.
直接替換替代品,適用於 MAX232ECPWR — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MAX232ECPWR (相同外形與佔位) — 差異在於 Product Type, Package, Maximum Data Rate, Supply Voltage Range, ESD Protection.
MAX232EIPWR
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MAX3232ECPW
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MAX3232EIPWRG4
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MAX232AEEPE
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
TRS232EIPWR
✅ 直接替換📋 參考替代品(不在目錄中)
MAX232ECPWR 規格
| Product Type | RS-232 transceiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Channel Configuration | 2/2 full RS-232 transceiver |
| Supply Voltage Range | 4.5V to 5.5V |
| Nominal Supply Voltage | 5V |
| Maximum Data Rate | 250kbps |
| ESD Protection | IEC 61000-4-2 |
| Logic Compatibility | 5V TTL/CMOS |
| RS-232 Standard Level | TIA/EIA-232-F |
| 封裝 | 16-pin TSSOP |
| 安裝類型 | Surface mount |
| Driver Output Type | RS-232 bipolar line driver |
| Receiver Output Type | TTL/CMOS logic receiver |
| Voltage Generation | Single 5V supply with capacitive voltage generator |
MAX232ECPWR 16-pin tssop 腳位配置指南
MAX232ECPWR(16-pin tssop 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MAX232ECPWR.
請參閱 資料表 以查看完整腳位配置。
典型應用
MAX232ECPWR 適用於 6 應用s: Programmable Logic Controller Service Port, Industrial Data Acquisition Equipment, Embedded System Debug Interface, Legacy Computer Peripheral Connection, Instrumentation Control and Service Link, Industrial Networking Gateway.
Programmable Logic Controller Service Port
The MAX232ECPWR fits legacy PLC service ports because its two drivers and two receivers provide a complete point-to-point RS-232 interface from a single 5V rail. Its 250kbps maximum signaling rate is suitable for configuration downloads, status exchange, and short diagnostic sessions. IEC 61000-4-2 protection adds useful resilience where the serial connector is exposed to electrostatic discharge. The 16-pin TSSOP package also keeps the interface compact enough for space-constrained controller boards.
推薦
Industrial Data Acquisition Equipment
The MAX232ECPWR can connect laboratory and industrial data-acquisition equipment to a legacy RS-232 controller. Two transmit and two receive channels support bidirectional command and measurement traffic, while the 250kbps rate accommodates moderate-rate instrument data. Operating from 4.5V to 5.5V simplifies integration with conventional 5V logic. Its documented IEC 61000-4-2 protection is especially useful in industrial environments where exposed cables and connector contacts can receive electrostatic discharge.
推薦
Embedded System Debug Interface
The MAX232ECPWR is useful for a legacy debug or configuration interface because it translates between 5V TTL or CMOS logic and RS-232 line levels. A pair of driver and receiver channels allows command transmission and status reception through one compact device. The 250kbps signaling limit supports firmware logs, bootloader messages, and diagnostic commands. IEC 61000-4-2 protection helps protect the interface when the cable is connected to a user-accessible service connector.
推薦
Legacy Computer Peripheral Connection
The MAX232ECPWR provides a modern surface-mount bridge for legacy DB9-style RS-232 ports on industrial computers, test systems, and service equipment. Its dual-channel arrangement is sufficient for transmit, receive, and hardware-flow-control signals commonly found on RS-232 links. The 5V supply range matches many embedded and legacy interface designs, while the TSSOP package reduces board area compared with older through-hole transceivers. Ensure the connector's signal-to-ground arrangement and cable length match the application.
推薦
Instrumentation Control and Service Link
The MAX232ECPWR can serve as the service communications path in programmable instrumentation and test equipment. Its 250kbps rate is suitable for commands, calibration data, and periodic status reporting, while two drivers and two receivers support a standard bidirectional console connection. The single 5V architecture reduces the number of rails required around legacy serial hardware. IEC 61000-4-2 protection improves interface robustness when users connect service leads to external equipment in laboratories or production areas.
推薦
Industrial Networking Gateway
The MAX232ECPWR can provide the legacy serial port on a gateway that bridges older equipment to a modern network. Bidirectional RS-232 communication allows the gateway to exchange configuration commands and telemetry with controllers that lack Ethernet connectivity. The 250kbps data rate suits supervisory traffic rather than bulk data transfer. Its 16-pin TSSOP footprint and integrated ESD protection make it practical for compact industrial interface cards, subject to proper grounding and cable-side surge protection.
推薦
推薦產品摘要
工程參考資料,適用於 MAX232ECPWR — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MAX232EIPWR | MAX3232ECPW | MAX3232EIPWR | MAX232AEEPE | TRS232EIPWR |
|---|---|---|---|---|---|---|
| Package | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP | 16-pin TSSOP candidate | 16-pin TSSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver | Dual RS-232 transceiver |
| Number of Drivers | 2 | 2 | 2 | 2 | 2 | 2 |
| Number of Receivers | 2 | 2 | 2 | 2 | 2 | 2 |
| Nominal Supply Voltage | 5V | 5V | 5V | 5V | 5V | 5V |
| Maximum Data Rate | 250kbps | 250kbps | 250kbps | 250kbps | 250kbps | 250kbps |
主要差異化特點
- Documented ESD protection in a compact dual-channel interface (對比TRS232EIPWR)
- High data rate for a single-supply RS-232 transceiver (對比MAX232EIPWR)
- Direct same-footprint sourcing family (對比MAX3232ECPW)
設計說明
Place the charge-pump capacitors and supply-decoupling capacitor close to their specified pins, keeping the high-current charge-pump loop compact. The MAX232ECPWR generates bipolar RS-232 voltage from its 5V supply through switched-capacitor action, so long capacitor traces can increase switching noise and reduce available voltage margin. Follow the manufacturer datasheet capacitor values and component tolerances rather than substituting generic capacitors solely by capacitance rating.
Do not treat the 250kbps rating as a guaranteed communication distance. RS-232 cable capacitance, driver loading, connector construction, grounding, and common-mode noise can reduce practical reliability at higher rates. Test the complete cable and equipment combination under worst-case noise conditions, and avoid relying on software flow control as a substitute for correctly routed handshake signals.
Keep connector-side RS-232 driver and receiver traces physically separated from sensitive analog or high-speed digital nets, and provide a continuous ground reference adjacent to the interface route. Although the device includes IEC 61000-4-2 protection, the protection network is not a substitute for external surge protection where cables extend beyond the enclosure or encounter larger industrial transients.
合規資訊
IEC 61000-4-2 protection is documented for the device. Other environmental and material-compliance claims were not established from the available product information and are therefore marked unknown.