MAX3232CDBG4 - 3V to 5.5V RS-232 Transceiver | TI
MPN: MAX3232CDBG4 ✓ 啟用中MAX3232CDBG4 概覽
An RS-232 transceiver is an interface IC that converts logic-level signals from a microcontroller, DSP, or computer into RS-232-compliant line levels and converts received RS-232 signals back into logic levels. The MAX3232 belongs to the line-driver and line-receiver hierarchy within interface ICs, bridging modern CMOS logic and the voltage levels used by legacy serial ports, industrial controllers, and point-of-sale equipment.
Principal features include a 1 Mbps maximum data rate, a 3.0 V to 5.5 V supply range, two transmit channels, two receive channels, and low-power operation. The commercial-temperature grade covers 0 °C to 70 °C. Its SSOP-16 package is suitable for compact PCB layouts where a larger SOIC footprint would be undesirable, and the lead-free gull-wing package is compatible with standard surface-mount assembly.
The transceiver generates the positive and negative RS-232 voltages from the single supply using an internal charge-pump circuit. Four 0.1 µF capacitors are required for that circuit, while the MAX3232 family operates without an external 5 V supply. Because RS-232 is a single-ended, unbalanced interface, the transceiver provides level translation but not galvanic isolation or long-distance noise immunity comparable with differential interfaces such as RS-485.
Typical applications include industrial control panels, serial adapters, automated test equipment, point-of-sale terminals, security systems, and embedded instrumentation. The 1 Mbps capability supports both legacy printer and mouse protocols as well as higher-rate data links when the connected equipment supports the corresponding protocol and cable characteristics.
When laying out the board, place the four charge-pump capacitors close to the device and keep the RS-232 traces away from sensitive analog or high-speed digital nets. Confirm the ground reference and cable shielding, and verify the logic levels against the host interface before energizing the board.
This page organizes the electrical ratings, package details, equivalent transceiver options, and application guidance needed to evaluate the MAX3232CDBG4 for a new RS-232 interface design.
直接替換替代品,適用於 MAX3232CDBG4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MAX3232CDBG4 (相同外形與佔位) — 差異在於 Supply Voltage Range, ESD Protection, External Capacitors, Function, Package.
MAX3232EIPWG4
✅ 直接替換聯絡詢價
查看資料表 →MAX3232CDE4
✅ 直接替換聯絡詢價
查看資料表 →TRS3232EIRGT
✅ 直接替換聯絡詢價
查看資料表 →MAX3232CDBG4 規格
| Product Type | RS-232 line driver/receiver transceiver |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Maximum Data Rate | 1 Mbps |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Duplex Mode | Full duplex |
| ESD Protection | ±15 kV |
| Charge-Pump Capacitors Required | 4 external 0.1 µF capacitors |
| 工作溫度範圍 | 0 °C to 70 °C |
| Temperature Grade | Commercial |
| Package Type | SSOP-16 |
| Terminal Count | 16 |
| Terminal Form | Gull wing |
| 安裝類型 | Surface mount |
| Logic Technology | CMOS |
| Lead-Free Status | Lead free |
| RoHS Compliance | Compliant |
| Product Lifecycle Status | Active |
MAX3232CDBG4 ssop-16 腳位配置指南
MAX3232CDBG4(ssop-16 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MAX3232CDBG4.
請參閱 資料表 以查看完整腳位配置。
典型應用
MAX3232CDBG4 適用於 6 應用s: Industrial Serial Control Panels, Point-of-Sale Terminals, Automated Test and Measurement Equipment, Embedded Security and Access Systems, Serial Adapters and Dongles, Printer and Legacy Peripheral Interfaces.
Industrial Serial Control Panels
The MAX3232CDBG4 suits controller boards that must communicate with legacy RS-232 panels, scales, or service ports. Its two drivers and two receivers support full-duplex exchange, while the 3.0 V to 5.5 V operating range allows connection to either a 3.3 V microcontroller rail or a 5 V controller. The 1 Mbps capability provides margin for common serial protocols. Designers should keep the four charge-pump capacitors close to the IC and route the RS-232 cable interface away from sensitive analog sections.
推薦
Point-of-Sale Terminals
POS peripherals often retain RS-232 connectors even when the main processor uses modern low-voltage logic. The MAX3232CDBG4 provides the required level translation through two transmit and two receive channels, operates from a single 3.0 V to 5.5 V supply, and eliminates the need for a separate RS-232 voltage source. The 16-pin SSOP package conserves board area in compact terminals. Firmware must match the UART baud rate and framing of the connected peripheral.
推薦
Automated Test and Measurement Equipment
Instrument controllers often need a short-distance serial link to a front panel, printer, or legacy test fixture. The MAX3232CDBG4 supports rates up to 1 Mbps, allowing designers to select faster serial modes when the peripheral supports them. Full-duplex operation permits simultaneous command transmission and response reception, while the commercial 0 °C to 70 °C range suits room-temperature test stations. Shielded cables and a common ground reference remain important for reliable industrial use.
推薦
Embedded Security and Access Systems
Access-control readers, intercoms, and camera-control boards can use the MAX3232CDBG4 to connect a CMOS controller to an RS-232 configuration port or downstream accessory. Its single-supply operation simplifies power design, and the two-channel arrangement allows one link for configuration and another for status reporting. The 16-pin SSOP footprint supports compact boards, while ±15 kV ESD protection strengthens the interface against electrostatic discharge encountered during installation or servicing.
推薦
Serial Adapters and Dongles
Compact serial adapters benefit from the MAX3232CDBG4 because it combines a 16-pin SSOP package, dual drivers, dual receivers, and single-supply operation in one component. The device supports both 3.3 V and 5 V host logic while presenting RS-232 levels to the attached peripheral. Designers should provide the datasheet-specified bypass capacitors, protect the connector from ESD, and verify that the cable length and baud rate suit the intended RS-232 application.
推薦
Printer and Legacy Peripheral Interfaces
The MAX3232CDBG4 remains appropriate for printers, scales, and legacy peripherals that use RS-232 rather than USB. Its two transmitters and receivers can support full-duplex links, and the 1 Mbps maximum rate covers the performance requirements of many printer and instrument protocols. Because the device does not translate protocol formats, the connected UART must use the same baud rate, data width, parity, and stop-bit configuration as the peripheral.
推薦
推薦產品摘要
工程參考資料,適用於 MAX3232CDBG4 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MAX3232E | MAX3232CDE4 | TRS3232E |
|---|---|---|---|---|
| Package | SSOP-16 | SSOP-16 | SSOP-16 | SSOP-16 |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Maximum Data Rate | 1 Mbps | 1 Mbps | 1 Mbps | 1 Mbps |
| Drivers and Receivers | 2 drivers, 2 receivers | 2 drivers, 2 receivers | 2 drivers, 2 receivers | 2 drivers, 2 receivers |
| Duplex Mode | Full duplex | Full duplex | Full duplex | Full duplex |
| External Charge-Pump Capacitors | 4 × 0.1 µF | 4 × 0.1 µF | 4 × 0.1 µF | 4 × 0.1 µF |
| New-Design Recommendation | Existing MAX3232C option | Recommended by the manufacturer comparison guidance | Family ordering variant | Alternative series comparison |
主要差異化特點
- Manufacturer-recommended direct upgrade path (對比MAX3232E)
- Single-supply RS-232 operation in a compact footprint (對比MAX3232CDE4)
- Integrated ESD protection for external cabling (對比TRS3232E)
設計說明
Place the four 0.1 µF charge-pump capacitors directly across their designated IC pins, with short traces and a solid ground connection. Keep the input and output bypass capacitors close to the supply and driver pins as well. Excessively long capacitor loops can allow switching transients from the charge pump to couple into the receiver path or reduce the guaranteed RS-232 output level.
Route RS-232 connector traces away from sensitive analog inputs, crystal circuits, and high-speed clock nets. Connect the cable shield to chassis or shield ground according to the equipment's grounding strategy, and provide a direct signal-ground return to the transceiver. Avoid routing RS-232 traces beneath the charge-pump capacitor network, where periodic current pulses can increase radiated noise.
Do not treat the 3.0 V to 5.5 V supply rating as permission to exceed 5.5 V. Confirm the logic-high thresholds of the connected UART, use the specified capacitor values, and observe the datasheet's no-connect and unused-driver guidance. When substituting another family member, verify the exact ordering suffix, package drawing, pin mapping, temperature grade, and ESD rating rather than matching only the MAX3232 family name.
合規資訊
The device is identified as a lead-free SSOP part. RoHS compliance is shown in the indexed component comparison. REACH, halogen-free, and conflict-minerals statuses were not established for this ordering code.