Texas Instruments

MAX3243CPWRG4 - 250kbps RS-232 | Texas Instruments

MPN: MAX3243CPWRG4 ✓ 啟用中
3 V to 5.5 V Vdss 28-pin TSSOP Package
MOQ: 1 |

MAX3243CPWRG4 概覽

The Texas Instruments MAX3243CPWRG4 is a 3 V to 5.5 V multichannel RS-232 line driver and receiver capable of operating at 250 kbps, with ±15 kV human-body-model ESD protection, in a 28-pin TSSOP package. The device supports three RS-232 driver channels and three receiver channels according to its distributor listing, making it suitable for bidirectional serial data links, industrial equipment, data acquisition systems, and portable instrumentation.

An RS-232 interface IC converts logic-level digital signals into RS-232-compatible line levels and converts received line signals back into logic levels. The MAX3243 belongs to the interface IC hierarchy, where it bridges a host controller or processor with a physical serial port. Its multichannel architecture supports several data paths on one board while limiting the number of separate transceiver packages required. The 3 V to 5.5 V supply range accommodates both 3.3 V and 5 V system rails.

The principal electrical features are a 250 kbps maximum data rate and ±15 kV ESD protection rated to the HBM model. These characteristics make the transceiver relevant to equipment where a cable-connected port must withstand electrostatic discharge events. The receiver channels handle incoming serial data, while the driver channels convert outbound logic signals into RS-232 line levels. Commercial temperature grading, a gull-wing terminal form, and a rectangular TSSOP package support conventional surface-mount assembly.

The MAX3243 family is designed for systems that require multiple RS-232 channels without using a larger transceiver for only one or two links. Its low-voltage operation allows communication between modern embedded systems and legacy RS-232 equipment. Because RS-232 is a single-ended, bipolar signaling interface, correct grounding, cable routing, and protection implementation remain important when integrating the device into an industrial or externally accessible system.

Typical uses include industrial control consoles, laboratory test equipment, serial adapters, data loggers, point-of-sale systems, and embedded instrumentation. In a multiport design, several receiver inputs can monitor separate device connections while the drivers support outbound command channels. The 28-pin TSSOP package also makes the part suitable for compact single-board systems where through-hole RS-232 components would consume excessive area.

When laying out the PCB, place the transceiver near its connector and connector-protection components to minimize exposed high-voltage RS-232 traces. Keep logic-side routing separated from line-side routing, provide the required bypassing capacitors close to the supply pins, and observe the device's absolute-maximum ratings for the RS-232 pins. Verify external protection, grounding, and cable requirements for the completed system rather than relying on the IC's internal ESD rating alone.

This product page combines the manufacturer's device information with package, pinout, purchasing, replacement, and design guidance. It also identifies the verified same-family drop-in candidates and distinguishes them from options that would require different wiring or package changes, helping engineers evaluate an RS-232 design without treating every electrically similar transceiver as a true replacement.

直接替換替代品,適用於 MAX3243CPWRG4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: MAX3243CPWRG4 (相同外形與佔位) — 差異在於 ESD Protection, Maximum Data Rate, Product Type.

Texas Instruments
Product Type: Multichannel RS-232 line driver and receiver
比較對象 MAX3243CPWRG4 →
Texas Instruments
ESD Protection: ±15 kV IEC ESD protection
Maximum Data Rate: 500 kbps
比較對象 MAX3243CPWRG4 →

MAX3243CPW

✅ 直接替換 ⚠️ 規格未經驗證
Texas Instruments
📦 28-pin TSSOP
Multichannel RS-232 line driver and receiver · 3 V to 5.5 V · 250 kbps · 3 · 5 · ±15 kV HBM · Serial-port connection pins, including GND · 28-pin TSSOP

聯絡詢價

查看資料表 →

MAX3243ECPWG4

✅ 直接替換 ⚠️ 規格未經驗證
Texas Instruments
📦 28-pin TSSOP
Multichannel RS-232 line driver/receiver · 3 · 5 · 3 V to 5.5 V · 500 kbps · ±15 kV IEC ESD protection · Full duplex · 500 mV

聯絡詢價

查看資料表 →

MAX3243CPA+

✅ 直接替換 ⚠️ 規格未經驗證
📦 28-pin TSSOP
Same MAX3243C RS-232 family and 28-pin TSSOP footprint; identified core supply and data-rate ratings are unchanged, while automatic-shutdown features differ by one functional block.

📋 參考替代品(不在目錄中)

MAX3243CPWRG4 規格

Product Type Multichannel RS-232 line driver/receiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
ESD Protection ±15 kV HBM
Driver Channel Count 3 channels
Receiver Channel Count 3 channels
Transceiver Configuration 3/5 transceiver
Interface Standard RS-232
Package Type 28-pin TSSOP
Package Code PW
Terminal Form Gull wing
Package Shape Rectangular
Temperature Grade Commercial
安裝類型 Surface mount
Number of Terminals 28
Datasheet Length 16 pages

MAX3243CPWRG4 rectangular 腳位配置指南

MAX3243CPWRG4(rectangular 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

MAX3243CPWRG4 的 rectangular 封裝腳位圖

無詳細腳位定義資料: MAX3243CPWRG4.

請參閱 資料表 以查看完整腳位配置。

典型應用

MAX3243CPWRG4 適用於 6 應用s: Industrial serial control console, Laboratory data acquisition equipment, Portable serial adapter, Data logger and telemetry equipment, Point-of-sale terminal interface, Embedded test and measurement system.

🏭

Industrial serial control console

The MAX3243CPWRG4 suits an industrial console that must communicate with several legacy RS-232 instruments. Its three driver channels can carry outbound commands, while three receiver channels can monitor device responses, reducing the number of transceivers required on the controller board. The 3 V to 5.5 V supply range supports modern embedded control logic, and the 250 kbps rate is appropriate for moderate-speed command and telemetry traffic. Place the IC near the DB9 or connector circuitry, keep logic and line-side traces separated, and use suitable external protection when ports are exposed to industrial cabling.

📺

Laboratory data acquisition equipment

The MAX3243CPWRG4 can connect a laboratory instrument or data-acquisition unit to a computer or controller through multiple RS-232 ports. The 250 kbps data rate accommodates typical command transfers and moderate measurement streams, while the three-driver and three-receiver arrangement supports bidirectional instruments without requiring separate driver and receiver packages. Its 28-pin TSSOP package reduces board area compared with larger through-hole implementations. Designers should use the manufacturer's application circuit as a reference for bypassing, enable or shutdown behavior, and connector interfacing, particularly when long external cables increase electrostatic-discharge risk.

📱

Portable serial adapter

The MAX3243CPWRG4 is appropriate for a compact portable adapter that converts a host processor's logic-level serial interface into RS-232. The 3 V to 5.5 V operating range permits use with 3.3 V portable processors, and the 250 kbps rate supports configuration transfers, firmware downloads, and short diagnostic sessions. Its TSSOP construction is useful when connector placement and enclosure space are constrained. Maintain a controlled ground reference between the adapter and connected equipment, and consider whether an isolated interface is necessary when the two systems can have different ground potentials.

🧩

Data logger and telemetry equipment

The MAX3243CPWRG4 can serve multiple telemetry paths in a data logger that collects status or command information from RS-232 sensors and embedded modules. Three receiver channels permit simultaneous monitoring of several slow-changing devices, while three driver channels support commands or acknowledgments. The 250 kbps limit is well suited to typical telemetry rates and leaves margin for protocol overhead and framing. For reliable field operation, terminate and route cables according to the RS-232 topology, use a low-impedance signal ground, and keep externally accessible line-side nets away from sensitive logic and clock traces.

🖥️

Point-of-sale terminal interface

The MAX3243CPWRG4 can interface a point-of-sale terminal or peripheral hub with equipment that retains legacy RS-232 communication. The three transmit and three receive channels permit multiple service, display, scanner, or controller connections on one logic board. Operation from 3 V to 5.5 V supports embedded processors and programmable controllers, while the surface-mount TSSOP package simplifies automated assembly. Use the manufacturer pin and application information to determine whether automatic shutdown or an always-active configuration is preferable, and protect connector-exposed pins with a circuit that is compatible with the system's ESD and surge requirements.

🔧

Embedded test and measurement system

The MAX3243CPWRG4 is useful in an embedded test system that communicates with RS-232-controlled instruments, fixtures, or legacy service ports. Its 250 kbps capability supports instrument commands and status responses, while the multichannel arrangement reduces duplicated circuitry compared with single-channel transceivers. The 3 V to 5.5 V supply range enables integration with mixed-voltage processors and controllers. Engineers should place the transceiver close to the connector, include the recommended bypass capacitors, preserve RS-232 signal polarity, and verify that cable length and capacitance remain appropriate for the intended baud rate.

What are the key specifications of MAX3243CPWRG4 that engineers should know?
The MAX3243CPWRG4 is a 3 V to 5.5 V, 250 kbps multichannel RS-232 interface IC with three driver channels, three receiver channels, and ±15 kV HBM ESD protection in a 28-pin TSSOP package. According to the Texas Instruments MAX3243 datasheet, the device is intended for low-voltage systems requiring several RS-232 channels on one board. Its commercial temperature grade and surface-mount package support standard embedded and industrial assembly.
Where can I download the MAX3243CPWRG4 datasheet PDF?
The official MAX3243CPWRG4 datasheet PDF is available from the Texas Instruments product page at https://www.ti.com/product/MAX3243. The manufacturer also provides a direct PDF at https://www.ti.com/lit/ds/symlink/max3243.pdf. Use the manufacturer document for the complete pin description, electrical characteristics, timing information, recommended operating conditions, and application guidance.
Where can I find the MAX3243CPWRG4 pinout?
The MAX3243CPWRG4 pinout is shown in the pin-description section of the Texas Instruments MAX3243 datasheet at https://www.ti.com/lit/ds/symlink/max3243.pdf. The device uses a 28-pin TSSOP package. Use the pin-description table when assigning connector signals and confirming line-side versus logic-side nets before laying out the board.
What is the operating voltage of MAX3243CPWRG4?
The MAX3243CPWRG4 operates from 3 V to 5.5 V, allowing it to work with both 3.3 V and 5 V logic systems. The Texas Instruments MAX3243 datasheet identifies this range as the device's supply-voltage specification. Keep the supply within the recommended operating limits and provide local bypass capacitance at the device's supply pins.
What is the maximum data rate of MAX3243CPWRG4?
The MAX3243CPWRG4 supports a maximum data rate of 250 kbps. This rating applies to the MAX3243 family described on the Texas Instruments product page and in the manufacturer datasheet. Cable length, capacitance, baud-rate tolerance, clocking, and signal-integrity losses can reduce practical performance, especially on extended RS-232 connections.
What ESD protection does MAX3243CPWRG4 provide?
The MAX3243CPWRG4 provides ±15 kV ESD protection according to the human-body-model rating in the Texas Instruments MAX3243 datasheet. This rating protects the transceiver's specified pins under the stated HBM test conditions. It does not remove the need for system-level surge protection, proper grounding, shielding, and suitable external connector protection.
How many RS-232 drivers and receivers are in MAX3243CPWRG4?
The MAX3243CPWRG4 contains three RS-232 driver channels and three receiver channels, as identified by its 3/5 transceiver listing and the Texas Instruments MAX3243 product information. This arrangement allows one package to support multiple outbound and inbound serial signals. Exact signal allocation should follow the manufacturer's pin-description table.
Where can I buy MAX3243CPWRG4 online?
Use the Request a Quote form on this page to ask for MAX3243CPWRG4 availability, current commercial terms, and a shipment quotation. The part is identified as an active Texas Instruments product, but current inventory and delivery timing should be confirmed through the quote process. The manufacturer product page remains the authoritative source for ordering information.
What is the price of MAX3243CPWRG4?
The current commercial price for MAX3243CPWRG4 should be requested through the Request a Quote form on this page. Pricing can depend on order quantity, package quantity, lead time, and current channel availability. The form allows an engineer to obtain current terms for the exact MAX3243CPWRG4 ordering code without relying on a static listing price.
What is the lead time and stock status of MAX3243CPWRG4?
The MAX3243CPWRG4 is listed by Texas Instruments as an active product, but current stock, minimum order quantity, and lead time should be confirmed through the Request a Quote form on this page. Provide the required quantity and target shipment date with the request so the current manufacturing and distribution position can be evaluated for the exact 28-pin TSSOP order code.
Is MAX3243CPWRG4 in stock?
Current MAX3243CPWRG4 inventory must be confirmed through the Request a Quote form on this page. Texas Instruments identifies the MAX3243 family as an active product, but that product status does not by itself confirm stock for a specific quantity and date. Submit the required order quantity, package preference, and delivery target for an availability response.
What is the difference between MAX3243CPWRG4 and MAX3243CPW?
MAX3243CPWRG4 and MAX3243CPW belong to the same MAX3243C device family, but the final ordering characters can indicate different commercial or packaging options. The verified cross-reference result directly associates MAX3243CPW with MAX3243CPWRG4. Confirm the package, temperature grade, and delivery configuration against the manufacturer ordering information before treating the ordering codes as interchangeable.
Can MAX3243CPW replace MAX3243CPWRG4?
MAX3243CPW is the closest identified same-family drop-in candidate for MAX3243CPWRG4, with the family architecture and 3 V to 5.5 V interface function retained. Its final suffix must be checked for packaging and commercial-grade differences before substitution. Use the manufacturer ordering table and the PCB footprint to confirm that the physical delivery option matches the assembled design.
What is the best Texas Instruments drop-in replacement for MAX3243CPWRG4?
MAX3243CPW is the best identified Texas Instruments same-family drop-in candidate for MAX3243CPWRG4 because it retains the MAX3243C RS-232 transceiver architecture and uses the same device family. MAX3243ECPWG4 and MAX3243CPA+ are additional same-family candidates, but their suffix, package, and shutdown-related details must be checked before replacement. Confirm every pin and ordering condition against the manufacturer datasheet.
When should I choose MAX3243CPWRG4 instead of MAX3243CPW?
Choose MAX3243CPWRG4 when its ordering code matches the required commercial grade, package, and delivery configuration for the assembled PCB. Choose MAX3243CPW when that suffix is the approved configuration for the same MAX3243C design and its manufacturer ordering details satisfy the requirements. The two MPNs share the family function, but suffix selection should never be based only on the base device name.

工程參考資料,適用於 MAX3243CPWRG4 — 比較、設計指引及合規資訊。

選型指南

Choose MAX3243CPWRG4 for a compact 28-pin TSSOP design that needs three RS-232 drivers and three receivers, operates from 3 V to 5.5 V, and must handle signals up to 250 kbps. MAX3243CPW is the closest identified same-family ordering-code alternative and should be selected when its manufacturer-defined suffix, commercial grade, package, and delivery method match the PCB requirements. Consider MAX3243ECPWG4 when the design can use the E-series enable-controlled behavior, and evaluate MAX3243CPA+ when its automatic-shutdown feature is specifically required. Confirm every candidate against the pin-description and ordering tables before substitution. If fewer than three RS-232 channels are required, a single-channel device may reduce board area; if longer cables, higher speeds, or noisy industrial environments dominate, evaluate a differential serial interface instead.

與替代品比較

參數 本產品 MAX3243CPW MAX3243ECPWG4 MAX3243CPA+
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP
Product Type Multichannel RS-232 line driver/receiver Multichannel RS-232 line driver/receiver Multichannel RS-232 line driver/receiver Multichannel RS-232 line driver/receiver
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V
Maximum Data Rate 250 kbps 250 kbps 250 kbps 250 kbps

主要差異化特點

  • Combines six active RS-232 channels in one device (對比MC1489NG4)
  • Supports both 3.3 V and 5 V system environments (對比MC1488NE4)
  • Uses a compact 28-pin surface-mount package (對比MC3487DE4)
  • Provides documented HBM ESD protection (對比MAX3243CPW)

設計說明

Place the MAX3243CPWRG4 close to the RS-232 connector because the line-side nets carry bipolar voltage levels and are more susceptible to coupling than the logic-side signals. Keep the RS-232 traces away from clocks, reset lines, analog inputs, and sensitive digital buses. Route the connector ground as a signal-return path, and place external protection components directly beside the connector so surge current is diverted before reaching the transceiver pins.

Use the manufacturer's recommended bypass capacitance and connect it directly to the supply and ground pins with very short traces. The 3 V to 5.5 V operating range permits either 3.3 V or 5 V system rails, but the selected rail must remain within the datasheet's recommended limits. Confirm startup, enable or shutdown behavior, and supply-current requirements against the exact ordering variant before releasing the PCB layout.

Do not treat ±15 kV HBM protection as a complete external surge-protection strategy. Specify connector-level protection for the actual cable environment, maintain a common signal ground between communicating systems, and observe the transceiver's absolute-maximum ratings. Also avoid assuming that every MAX3243 suffix has identical shutdown behavior; the MAX3243E and MAX3243C families differ in control features even though their core RS-232 function and package family are related.

RS-232 is a single-ended bipolar interface, so receiver thresholds, driver slew behavior, cable capacitance, and grounding influence reliable communication at the 250 kbps device limit. Use the manufacturer's application circuit as the basis for external components and test the assembled interface with the longest intended cable. If higher data rates, longer cables, or electrically noisy industrial environments are expected, evaluate a lower-rate or differential communication standard instead.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The manufacturer datasheet and product page identify the device as commercial grade, but explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 statements were not available in the verified text. The G4 ordering suffix indicates the manufacturer's green-compliant device configuration, but this is not treated as a substitute for explicit compliance statements.

資料驗證日期: 2026-11-09 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

MAX3243CPWRG4 datasheet MAX3243CPWRG4 pinout MAX3243CPWRG4 datasheet pdf MAX3243CPWRG4 equivalent MAX3243CPWRG4 replacement MAX3243CPWRG4 cross reference MAX3243CPWRG4 price MAX3243CPWRG4 stock Texas Instruments MAX3243CPWRG4 MAX3243 250kbps RS-232 interface MAX3243 28-pin TSSOP pinout MAX3243CPW vs MAX3243CPWRG4 MAX3243CPWRG4 industrial RS-232 MAX3243CPWRG4 footprint

相關元件與詞彙

Texas Instruments MAX3243CPWRG4 MAX3243CPW MAX3243ECPWG4 MAX3243CPA+ RS-232 RS-232 line driver RS-232 receiver multichannel transceiver interface IC serial interface logic-level signal conversion 250 kbps 3 V to 5.5 V supply ±15 kV HBM ESD protection 28-pin TSSOP TSSOP package family surface-mount technology commercial temperature grade gull-wing terminal industrial control data acquisition telemetry ESD protection logic ground
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情