MAX3381EEUP+T - 2/2 RS-232 Transceiver | Analog Devices
MPN: MAX3381EEUP+T ✓ 啟用中MAX3381EEUP+T 概覽
An RS-232 transceiver is an interface IC that converts low-voltage digital logic signals into RS-232 voltage levels and converts received RS-232 signals back into logic-compatible levels. It belongs to the transceiver and driver/receiver hierarchy, bridging UART, UART-compatible controller, and computer I/O logic with external serial cables. This bidirectional level-shifting function allows a compact system to communicate through a longer-distance, noise-tolerant serial interface.
The MAX3381EEUP+T provides two transmit channels and two receive channels, supporting full-duplex point-to-point serial links. Its +2.35 V to +5.5 V operating range supports low-voltage logic systems as well as conventional +5 V equipment. The manufacturer's product page identifies 15 kV ESD protection on both I/O and logic pins, helping protect sensitive interface circuits when cables are connected or disconnected.
The MAX3380E and MAX3381E families combine low power consumption with high data-rate capability. The MAX3381E variant is specified for production availability, and its enhanced ESD protection applies to both the RS-232 side and the logic pins. Independent transmit and receive channels allow full-duplex operation when the connected system assigns one driver and one receiver to each communication path.
Typical uses include industrial control links, point-of-sale equipment, data-cable interfaces, instrumentation, and embedded serial ports. The dual transmitter arrangement can support two outbound RS-232 signals, while the dual receivers can monitor two incoming signals. In designs using a UART, the device can translate between the controller's logic-level pins and the voltage levels required by an RS-232 cable.
When laying out the circuit, place the device close to the RS-232 connector and route driver and receiver traces away from sensitive analog or high-speed digital paths. Verify the connector's signal and ground assignments, provide the required supply bypassing, and maintain adequate board spacing to reduce surge-current exposure at the protected pins.
This product page brings together the manufacturer's core electrical characteristics, package information, verified drop-in relationships, and practical interface-layout guidance. It is intended to help engineers evaluate the MAX3381EEUP+T for low-voltage RS-232 links, compare documented replacements, and plan protection and layout before releasing a PCB design.
直接替換替代品,適用於 MAX3381EEUP+T — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MAX3381EEUP+T (相同外形與佔位) — 差異在於 Interface Standard, Package, Supply Voltage Range.
MAX3381EEUP+
✅ 直接替換聯絡詢價
查看資料表 →MAX3381ECUP+
✅ 直接替換聯絡詢價
查看資料表 →MAX3381EEUP+T 規格
| Transceiver Configuration | 2 Transmitter / 2 Receiver |
| Supply Voltage Range | +2.35 V to +5.5 V |
| 供應電流 | 1 µA |
| ESD Protection on I/O Pins | ±15 kV |
| ESD Protection on Logic Pins | ±15 kV |
| Interface Standard | EIA/TIA-232, V.28 and V.24 |
| 腳位數 | 20 pins |
| 封裝 | 20-pin TSSOP |
| 安裝類型 | Surface Mount |
MAX3381EEUP+T 20-pin tssop 腳位配置指南
MAX3381EEUP+T(20-pin tssop 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MAX3381EEUP+T.
請參閱 資料表 以查看完整腳位配置。
典型應用
MAX3381EEUP+T 適用於 6 應用s: Low-Voltage Embedded Serial Port, Industrial Control Console, Point-of-Sale Equipment, Data Cable Interface, Instrumentation and Measurement, Peripheral and Sensor Gateway.
Low-Voltage Embedded Serial Port
The MAX3381EEUP+T fits a compact embedded controller that needs to communicate through a conventional RS-232 connection without a +5 V-only interface. Its +2.35 V to +5.5 V operating range allows direct operation from suitable low-voltage system rails, while the two transmitters and two receivers support separate outbound and inbound paths. The 1 µA supply-current specification is valuable in power-sensitive equipment. Place the transceiver near the serial connector, provide the required local bypass capacitance, and route the logic-side traces away from the higher-voltage RS-232 outputs.
推薦
Industrial Control Console
The MAX3381EEUP+T can bridge a controller-based industrial console to an RS-232 service interface because it provides two transmitters and two receivers for full-duplex communication. Its +2.35 V to +5.5 V supply range accommodates low-voltage logic domains, and ±15 kV protection on both I/O and logic pins strengthens the interface against electrostatic discharge. The designer should still verify the exact temperature grade, connect a protective ground near the cable entry, and keep switching-node and high-current traces away from the transceiver footprint.
推薦
Point-of-Sale Equipment
The MAX3381EEUP+T is suitable for point-of-sale equipment that needs more than one RS-232 direction in a limited board area. Two transmitter channels can address separate peripherals while two receiver channels can accept return or status information, reducing the need for multiple interface packages. Its low 1 µA supply current supports compact systems with limited standby power, while the 20-pin TSSOP package simplifies routing to a conventional surface-mount design. Validate connector pin assignments and logic levels in the system schematic before fabrication.
推薦
Data Cable Interface
The MAX3381EEUP+T is designed for data-cable applications that require logic-to-RS-232 conversion in both directions. Two transmitter outputs and two receiver inputs allow two cable-facing channels, and the +2.35 V to +5.5 V range supports systems using either low-voltage or +5 V supplies. The interface's ±15 kV ESD rating on cable-side and logic-side pins supports robust connector integration, but engineers should still apply chassis grounding and verify that the selected connector exposes the intended signals.
推薦
Instrumentation and Measurement
The MAX3381EEUP+T can provide the RS-232 interface between a measurement instrument and a host computer. The two receivers permit two incoming measurements or status signals, while the two transmitters support command or control outputs. Low 1 µA supply current is beneficial in portable or intermittently powered instruments, and the 20-pin TSSOP package preserves board area. Confirm the operating temperature range, supply sequencing, and connector grounding for the specific instrument enclosure and cable length.
推薦
Peripheral and Sensor Gateway
The MAX3381EEUP+T can connect a gateway board to legacy RS-232 sensors or peripheral controllers while keeping the host logic rail within the +2.35 V to +5.5 V operating range. Its dual-channel architecture supports separate command and telemetry paths, and the low supply current assists battery- or sensor-oriented designs. For installations with long cables, use the protected transceiver at the connector edge, maintain a solid ground path, and confirm that surge and ESD requirements are handled at the system level.
推薦
推薦產品摘要
工程參考資料,適用於 MAX3381EEUP+T — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MAX3381EEUP+ | MAX3381ECUP+ |
|---|---|---|---|
| Package | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Transceiver Configuration | 2Tx/2Rx | 2Tx/2Rx | 2Tx/2Rx |
主要差異化特點
- Supports lower-voltage logic systems (對比MAX3381EEUP+)
- Documented complete replacement path (對比MAX3381ECUP+)
- Full-duplex channel count in one package (對比MAX3381EEUP+)
設計說明
Place the MAX3381EEUP+T close to the RS-232 connector and route the cable-side driver traces as short as practical. Keep logic-side traces away from the transmit outputs, and provide a low-impedance ground path between the connector ground, transceiver ground, and circuit ground. This arrangement limits transient-current loop area and helps the ±15 kV-protected pins remain effective during cable events.
Use the manufacturer's recommended supply-bypass configuration and place the bypass capacitor adjacent to the device supply pin. The device operates from +2.35 V to +5.5 V, so the system rail must remain inside that interval during startup, communication activity, and fault recovery. Confirm that ground bounce or connector transients do not pull the local supply outside the permitted operating range.
Do not treat the logic-side pins as additional RS-232 outputs merely because they receive ESD protection. Verify every transmitter input, transmitter output, receiver input, receiver output, supply, and ground assignment against the current pin-description table before routing the PCB. Also confirm the operating-temperature suffix of any replacement so a board intended for extended-temperature use is not populated with a commercial-temperature ordering code.
合規資訊
The MAX3381E family is listed as production by Analog Devices, but no specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification declaration appears in the available product information.