MAX3381EEUP+T - 2/2 RS-232 Transceiver | Analog Devices
MPN: MAX3381EEUP+T ✓ সক্রিয়MAX3381EEUP+T সারাংশ
An RS-232 transceiver is an interface IC that converts low-voltage digital logic signals into RS-232 voltage levels and converts received RS-232 signals back into logic-compatible levels. It belongs to the transceiver and driver/receiver hierarchy, bridging UART, UART-compatible controller, and computer I/O logic with external serial cables. This bidirectional level-shifting function allows a compact system to communicate through a longer-distance, noise-tolerant serial interface.
The MAX3381EEUP+T provides two transmit channels and two receive channels, supporting full-duplex point-to-point serial links. Its +2.35 V to +5.5 V operating range supports low-voltage logic systems as well as conventional +5 V equipment. The manufacturer's product page identifies 15 kV ESD protection on both I/O and logic pins, helping protect sensitive interface circuits when cables are connected or disconnected.
The MAX3380E and MAX3381E families combine low power consumption with high data-rate capability. The MAX3381E variant is specified for production availability, and its enhanced ESD protection applies to both the RS-232 side and the logic pins. Independent transmit and receive channels allow full-duplex operation when the connected system assigns one driver and one receiver to each communication path.
Typical uses include industrial control links, point-of-sale equipment, data-cable interfaces, instrumentation, and embedded serial ports. The dual transmitter arrangement can support two outbound RS-232 signals, while the dual receivers can monitor two incoming signals. In designs using a UART, the device can translate between the controller's logic-level pins and the voltage levels required by an RS-232 cable.
When laying out the circuit, place the device close to the RS-232 connector and route driver and receiver traces away from sensitive analog or high-speed digital paths. Verify the connector's signal and ground assignments, provide the required supply bypassing, and maintain adequate board spacing to reduce surge-current exposure at the protected pins.
This product page brings together the manufacturer's core electrical characteristics, package information, verified drop-in relationships, and practical interface-layout guidance. It is intended to help engineers evaluate the MAX3381EEUP+T for low-voltage RS-232 links, compare documented replacements, and plan protection and layout before releasing a PCB design.
এর জন্য ড্রপ-ইন বিকল্প MAX3381EEUP+T — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible MAX3381EEUP+T (একই form factor এবং footprint) — পার্থক্য রয়েছে Interface Standard, Package, Supply Voltage Range.
MAX3381EEUP+
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MAX3381ECUP+
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MAX3381EEUP+T বিশেষণ
| Transceiver Configuration | 2 Transmitter / 2 Receiver |
| Supply Voltage Range | +2.35 V to +5.5 V |
| সাপ্লাই কারেন্ট | 1 µA |
| ESD Protection on I/O Pins | ±15 kV |
| ESD Protection on Logic Pins | ±15 kV |
| Interface Standard | EIA/TIA-232, V.28 and V.24 |
| পিন সংখ্যা | 20 pins |
| প্যাকেজ | 20-pin TSSOP |
| মাউন্টিং টাইপ | Surface Mount |
MAX3381EEUP+T 20-pin tssop পিন কনফিগারেশন গাইড
MAX3381EEUP+T (20-pin tssop প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MAX3381EEUP+T.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
MAX3381EEUP+T এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Low-Voltage Embedded Serial Port, Industrial Control Console, Point-of-Sale Equipment, Data Cable Interface, Instrumentation and Measurement, Peripheral and Sensor Gateway.
Low-Voltage Embedded Serial Port
The MAX3381EEUP+T fits a compact embedded controller that needs to communicate through a conventional RS-232 connection without a +5 V-only interface. Its +2.35 V to +5.5 V operating range allows direct operation from suitable low-voltage system rails, while the two transmitters and two receivers support separate outbound and inbound paths. The 1 µA supply-current specification is valuable in power-sensitive equipment. Place the transceiver near the serial connector, provide the required local bypass capacitance, and route the logic-side traces away from the higher-voltage RS-232 outputs.
সুপারিশকৃত
Industrial Control Console
The MAX3381EEUP+T can bridge a controller-based industrial console to an RS-232 service interface because it provides two transmitters and two receivers for full-duplex communication. Its +2.35 V to +5.5 V supply range accommodates low-voltage logic domains, and ±15 kV protection on both I/O and logic pins strengthens the interface against electrostatic discharge. The designer should still verify the exact temperature grade, connect a protective ground near the cable entry, and keep switching-node and high-current traces away from the transceiver footprint.
সুপারিশকৃত
Point-of-Sale Equipment
The MAX3381EEUP+T is suitable for point-of-sale equipment that needs more than one RS-232 direction in a limited board area. Two transmitter channels can address separate peripherals while two receiver channels can accept return or status information, reducing the need for multiple interface packages. Its low 1 µA supply current supports compact systems with limited standby power, while the 20-pin TSSOP package simplifies routing to a conventional surface-mount design. Validate connector pin assignments and logic levels in the system schematic before fabrication.
সুপারিশকৃত
Data Cable Interface
The MAX3381EEUP+T is designed for data-cable applications that require logic-to-RS-232 conversion in both directions. Two transmitter outputs and two receiver inputs allow two cable-facing channels, and the +2.35 V to +5.5 V range supports systems using either low-voltage or +5 V supplies. The interface's ±15 kV ESD rating on cable-side and logic-side pins supports robust connector integration, but engineers should still apply chassis grounding and verify that the selected connector exposes the intended signals.
সুপারিশকৃত
Instrumentation and Measurement
The MAX3381EEUP+T can provide the RS-232 interface between a measurement instrument and a host computer. The two receivers permit two incoming measurements or status signals, while the two transmitters support command or control outputs. Low 1 µA supply current is beneficial in portable or intermittently powered instruments, and the 20-pin TSSOP package preserves board area. Confirm the operating temperature range, supply sequencing, and connector grounding for the specific instrument enclosure and cable length.
সুপারিশকৃত
Peripheral and Sensor Gateway
The MAX3381EEUP+T can connect a gateway board to legacy RS-232 sensors or peripheral controllers while keeping the host logic rail within the +2.35 V to +5.5 V operating range. Its dual-channel architecture supports separate command and telemetry paths, and the low supply current assists battery- or sensor-oriented designs. For installations with long cables, use the protected transceiver at the connector edge, maintain a solid ground path, and confirm that surge and ESD requirements are handled at the system level.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MAX3381EEUP+T — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | MAX3381EEUP+ | MAX3381ECUP+ |
|---|---|---|---|
| Package | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Transceiver Configuration | 2Tx/2Rx | 2Tx/2Rx | 2Tx/2Rx |
মূল পার্থক্যসমূহ
- Supports lower-voltage logic systems (বনামMAX3381EEUP+)
- Documented complete replacement path (বনামMAX3381ECUP+)
- Full-duplex channel count in one package (বনামMAX3381EEUP+)
ডিজাইন নোট
Place the MAX3381EEUP+T close to the RS-232 connector and route the cable-side driver traces as short as practical. Keep logic-side traces away from the transmit outputs, and provide a low-impedance ground path between the connector ground, transceiver ground, and circuit ground. This arrangement limits transient-current loop area and helps the ±15 kV-protected pins remain effective during cable events.
Use the manufacturer's recommended supply-bypass configuration and place the bypass capacitor adjacent to the device supply pin. The device operates from +2.35 V to +5.5 V, so the system rail must remain inside that interval during startup, communication activity, and fault recovery. Confirm that ground bounce or connector transients do not pull the local supply outside the permitted operating range.
Do not treat the logic-side pins as additional RS-232 outputs merely because they receive ESD protection. Verify every transmitter input, transmitter output, receiver input, receiver output, supply, and ground assignment against the current pin-description table before routing the PCB. Also confirm the operating-temperature suffix of any replacement so a board intended for extended-temperature use is not populated with a commercial-temperature ordering code.
কমপ্লায়েন্স তথ্য
The MAX3381E family is listed as production by Analog Devices, but no specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification declaration appears in the available product information.