MC68MH360VR25VL - 25MHz QUICC M683xx MPU 357-BGA | NXP
MPN： MC68MH360VR25VL ⚠ 最後購買機會MC68MH360VR25VL 概覽
What is a MPU with an integrated CPM? A microprocessor unit (MPU) executes program code while the Communications Processor Module (CPM) offloads serial and networking protocol work, allowing the core to focus on application logic. Within the broader hierarchy, the MC68MH360VR25VL is a microprocessor -> 32-bit MPU -> integrated communications controller -> embedded SoC. This architecture became the foundation of Freescale/NXP's QUICC and later PowerQUICC families.
Key features include 25 MHz CPU32+ core, integrated CPM with multi-channel QMC supporting up to 64 logical channels, 10 Mbps Ethernet MAC, DRAM controller, and a 357-ball PBGA package for high-density board designs. Operating voltage is 3.3 V with 5 V tolerant I/O on selected pins per the M683xx family specification.
The device uses a Harvard-style CPU32+ core coupled to the CPM via dual-port internal RAM. The QMC (QUICC Multi-Channel) controller emulates up to 64 logical channels within one SCC using time-division multiplexing (TDM), enabling ISDN, HDLC, and other channelized protocols without external glue logic. A bus arbiter supports external masters and the on-chip DMA.
Typical applications include telecommunications line cards, ISDN modem pools, industrial Ethernet bridges, and legacy SCADA controllers. The 25 MHz core suits deterministic bit-banged I/O and small embedded protocol stacks where modern Cortex-M parts would over-engineer the cost target.
When designing with this part, allocate generous PCB area for the 357-ball PBGA (25 x 25 mm) and follow NXP's recommended decoupling scheme; supply sequencing for 3.3 V core and I/O rails must be respected to avoid bus contention. Lead-free reflow profiles (JEDEC J-STD-020) are required.
This page synthesizes distributor stock levels, packaging variants, and drop-in compatible alternatives not consolidated in the manufacturer datasheet, helping sourcing engineers navigate the EOL transition noted on the NXP product page.
直接替換替代品，適用於 MC68MH360VR25VL — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： MC68MH360VR25VL （相同外形與佔位） — 差異在於 Mounting Type, Core Architecture.
MC68MH360VR25L
✅ 直接替換📋 參考替代品（不在目錄中）
MC68MH360VR25LR2
✅ 直接替換📋 參考替代品（不在目錄中）
MC68EN360VR25VL
✅ 直接替換📋 參考替代品（不在目錄中）
MC68EN360VR25L
✅ 直接替換聯絡詢價
查看資料表 →MC68360ZQ25VL
✅ 直接替換聯絡詢價
查看資料表 →MC68MH360VR25VL 最大額定值與電氣特性
| Core Processor | CPU32+ |
| Number of Cores / Bus Width | 1 Core, 32-Bit |
| Series | M683xx (QUICC) |
| Speed | 25 MHz |
| Co-Processors / DSP | Communications; CPM (with QMC) |
| RAM Controllers | DRAM |
| Ethernet | 10 Mbps (1) |
| Operating Voltage | 3.3 V |
| 封裝 / 外殼 | 357-PBGA (25 x 25 mm) |
| Packaging | Tray |
| 安裝類型 | Surface Mount |
| Graphics Acceleration | No |
| Lead Free Status | Lead Free |
| RoHS 狀態 | RoHS Compliant |
| Part Status | Obsolete / EOL per NXP product page |
MC68MH360VR25VL 357-pbga (25 x 25 mm) 腳位配置指南
MC68MH360VR25VL（357-pbga (25 x 25 mm) 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： MC68MH360VR25VL.
請參閱 資料表 以查看完整腳位配置。
典型應用
MC68MH360VR25VL 適用於 6 應用s: Telecommunications Line Cards, Industrial Ethernet Bridges, ISDN Modem Pool Controllers, SCADA and Industrial Control, Embedded Protocol Converters, Legacy Telecom Backplane Controllers.
Telecommunications Line Cards
The MC68MH360VR25VL's integrated CPM with QMC engine supports up to 64 logical channels per SCC using time-division multiplexing, which is exactly the topology used in legacy ISDN and T1/E1 line card designs. At 25 MHz the CPU32+ core handles supervisory state machines and HDLC framing while the CPM drives physical-layer drivers. The 357-PBGA package accommodates the high ball count required for parallel bus glue logic and external PHY/MAC connections, and 3.3 V operation simplifies interface to standard telecom ASICs of that era.
推薦
Industrial Ethernet Bridges
The MC68MH360VR25VL integrates a 10 Mbps Ethernet MAC and a DRAM controller, which together support 10Base-T bridge/router designs without external protocol ASICs. The CPU32+ core at 25 MHz runs the bridging/filtering table while the CPM offloads serial port and SCC management. The 357-PBGA package's high pin count exposes multiple SCC/SMC/SPI interfaces for diagnostic UARTs, console ports, and side-band management buses. Designers benefit from reduced BOM count versus discrete MCU + external MAC designs of the same era.
推薦
ISDN Modem Pool Controllers
The QMC multi-channel engine emulates up to 64 logical channels within one SCC using TDM, making the MC68MH360VR25VL well suited for ISDN modem pool and channelized data concentrator designs. Its CPM drives the channelized HDLC protocol while the CPU32+ core handles call setup and routing state. The 357-PBGA footprint provides the bus bandwidth and peripheral count needed to aggregate multiple B-channels onto a single backplane. Reference designs from the late 1990s used this exact configuration in central-office equipment.
推薦
SCADA and Industrial Control
The MC68MH360VR25VL's combination of a deterministic 25 MHz CPU32+ core, multiple SCC/SMC channels, and integrated DRAM controller supports SCADA outstation designs where deterministic serial polling is required. The CPM can drive RS-485 multidrop protocols while the core executes the application telemetry stack. The 357-PBGA package provides the I/O density needed for parallel GPIO expansion and external memory-mapped peripherals. Operating at 3.3 V keeps power dissipation compatible with sealed industrial enclosures.
推薦
Embedded Protocol Converters
Protocol converters between legacy serial buses and Ethernet benefit from the MC68MH360VR25VL's mix of SCC, SMC, SPI, and 10 Mbps Ethernet MAC on a single die. The CPU32+ core runs the conversion state machine while the CPM offloads framing for each physical interface. The 357-PBGA package's 25 x 25 mm footprint fits the high I/O density needed for multi-drop serial transceivers and external PHY/MAC partners. The part's mature firmware ecosystem (uClinux, RTEMS, custom CPM microcode) accelerates development.
推薦
Legacy Telecom Backplane Controllers
Backplane controllers in legacy central-office and PBX systems use the MC68MH360VR25VL's external bus arbiter and DRAM controller to manage shared backplane memory. The CPU32+ core arbitrates bus mastership between on-chip DMA, external masters, and the CPM. The 357-PBGA package exposes the full bus and arbitration pin set, which smaller BGA variants cannot. Designers favor this part for field-proven reliability and broad firmware support across telecom OEMs.
推薦
推薦產品摘要
工程參考資料，適用於 MC68MH360VR25VL — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MC68MH360VR25L | MC68MH360VR25LR2 | MC68EN360VR25VL | MC68EN360VR25L | MC68360ZQ25VL |
|---|---|---|---|---|---|---|
| Package | 357-PBGA (25x25) | 357-PBGA (25x25) - same | 357-PBGA (25x25) - same | 357-PBGA (25x25) - same | 357-PBGA (25x25) - same | 357-PBGA (ZQ package) - same BGA, different ball map |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Speed | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 25 MHz |
| Core Architecture | CPU32+ | CPU32+ | CPU32+ | CPU32+ (Enhanced) | CPU32+ (Enhanced) | CPU32+ |
| Ethernet | 10 Mbps (1) | 10 Mbps (1) | 10 Mbps (1) | 10/100 Mbps (1) | 10/100 Mbps (1) | 10 Mbps (1) |
| Operating Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Packaging Format | Tray | Tray | Reel (R2 = 2000 pcs) | Tray | Tray | Tray |
| Lifecycle Status | EOL / Last Time Buy | EOL / Last Time Buy | EOL / Last Time Buy | EOL / Last Time Buy | EOL / Last Time Buy | EOL / Last Time Buy |
主要差異化特點
- Integrated Communications Processor Module (CPM) with QMC engine (對比MC68EN360VR25VL)
- Tray packaging for prototype and low-volume production (對比MC68MH360VR25LR2)
- Standard 10 Mbps Ethernet MAC for cost-sensitive designs (對比MC68EN360VR25VL)
設計說明
The 357-ball PBGA (25 x 25 mm) requires 0.8 mm ball pitch and a 4-6 layer PCB stack-up with continuous reference planes under the BGA to control impedance for the external bus and Ethernet MAC signals. Place all decoupling capacitors within 2 mm of the corresponding balls per NXP M683xx hardware design guidelines. Use a microvia-in-pad or dog-bone fanout with via-in-pad plating for reliable BGA breakout on standard 0.1 mm dielectric stack-ups.
The MC68MH360VR25VL requires sequenced power: the 3.3 V core rail must ramp before the I/O ring to avoid bus contention on the integrated DRAM controller and external bus. Use a reset supervisor such as the DS1231 or MAX811 to hold the part in reset until both rails are within tolerance. Estimated: at 25 MHz and typical 1.2 W core power, plan for a 3.3 V regulator rated at least 1.5 A with adequate thermal margin at the highest operating temperature.
Estimated: at 3.3 V core supply and 25 MHz, the MC68MH360VR25VL dissipates approximately 1.2 W typical, which can rise to 1.8 W under full CPM load. The 357-PBGA package's theta_JA of roughly 18 C/W (with adequate PCB copper) requires thermal vias under the die-attached balls to keep junction temperature below 125 C at 70 C ambient. For sealed enclosures, derate by 20 percent or add heat-spreader copper to the top of the package.
Route the Ethernet MII signals (TXD/RXD, TX_CLK, RX_CLK, CRS, COL) as a matched-length group within 50 mil of each other to keep the 10 Mbps MAC timing within specification. Keep the DRAM address/clock group matched and isolated from the SCC serial output drivers to reduce crosstalk. Reference the manufacturer datasheet's hardware design chapter for the canonical layout and decoupling scheme before tape-out.
Do not assume the MC68360ZQ25VL is a drop-in replacement for the MC68MH360VR25VL even though both share 357-ball BGA; the ZQ suffix denotes a different ball map per the Utmel comparison data. Always check the silicon revision mask and ball-map against the target PCB before re-spinning a layout. Also note that reel-pack variants (R2 suffix) differ only in packaging format, not in silicon behavior, so firmware is identical.
合規資訊
RoHS-compliant and lead-free per distributor listing (DigiKey / digchip.com). AEC-Q100 not applicable for legacy telecom MPU. Halogen-free status not explicitly stated in the verified data; set to unknown.
