MC9S08DN60AMLH - 8-Bit 40MHz 60KB MCU 64-LQFP | NXP
MPN： MC9S08DN60AMLH ✗ 停產MC9S08DN60AMLH 概覽
An 8-bit microcontroller is a compact embedded-control semiconductor that combines a processor core, nonvolatile program memory, volatile data memory, peripherals, and input/output pins in one integrated circuit. The S08 family belongs to the HCS08 embedded-control hierarchy and is intended for automotive and industrial-style control logic. MC9S08DN60AMLH is identified as an NRND NXP part, so new designs should account for lifecycle status while confirming availability with the manufacturer or an authorized distributor.
Key verified features include an enhanced HCS08 core operating at 40 MHz, a 20 MHz system bus, 60 KB Flash organized as 60K x 8, and 2 KB RAM. The integrated feature set includes a 10-bit ADC, an LCD driver, and multiple serial interfaces; distributor listings also identify LIN master functionality. Its 64-LQFP package provides 64 external leads for GPIO and peripheral connectivity, while the 10 x 10 mm outline supports compact embedded boards.
The HCS08 CPU is designed around an 8-bit CISC-style instruction set and supports interrupt-driven embedded control. At 40 MHz, the device provides substantially more processing headroom than slower general-purpose 8-bit alternatives, while the 60 KB Flash capacity accommodates application code and fixed-function logic. The combination of Flash, RAM, ADC, LCD drive, LIN support, and debug capability consolidates several functions into one controller.
Typical uses include automotive body and comfort modules, LIN-connected sensors and actuators, industrial control panels, instrument clusters, small motor-control systems, and cost-sensitive embedded products. The LCD driver and ADC are useful in human-interface and sensing designs, while LIN master support can simplify communication with automotive-compatible remote nodes.
Designers should preserve the 64-LQFP footprint, verify all pin multiplexing in the datasheet, and confirm the required LIN, LCD, ADC, clock, and debug functions before firmware changes. The NRND designation should be reviewed against the current NXP product-change and lifecycle information. This page synthesizes verified distributor listings, the manufacturer product page, and engineering guidance not found in a basic distributor catalog.
The product is supplied in a 64-LQFP package according to the verified distributor and manufacturer listings. Its core role is embedded control, and its key engineering trade-off is that a broad peripheral set may reduce external component count while requiring careful validation of pin assignments and software configuration.
直接替換替代品，適用於 MC9S08DN60AMLH — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： MC9S08DN60AMLH （相同外形與佔位） — 差異在於 Package, Flash Memory, ADC Resolution, Instruction Set, RoHS Status.
S9S08DZ60F2MLHR
✅ 直接替換聯絡詢價
查看資料表 →S9S08DZ60F2MLH
✅ 直接替換聯絡詢價
查看資料表 →S9S08DZ60F1VLH
✅ 直接替換📋 參考替代品（不在目錄中）
MC9S08AC60CPUE
✅ 直接替換聯絡詢價
查看資料表 →MC9S08AW32CPUE
✅ 直接替換聯絡詢價
查看資料表 →MC9S08DN60AMLH 最大額定值與電氣特性
| Product Type | 8-bit microcontroller |
| CPU Core | Enhanced HCS08 core |
| Maximum CPU Frequency | 40 MHz |
| System Bus Frequency | 20 MHz |
| Flash Memory | 60 KB |
| Flash Organization | 60K x 8 bits |
| RAM | 2 KB |
| ADC | 10-bit |
| Serial Interface | Multiple serial interfaces |
| LIN Capability | LIN master |
| LCD Support | LCD driver |
| 封裝 | 64-LQFP, 10 x 10 mm |
| 安裝類型 | Surface mount |
| Embedded Emulation and Debug | Supported by HCS08 family documentation |
| Instruction Set | HCS08 instruction set |
MC9S08DN60AMLH 64-lqfp, 10 x 10 mm 腳位配置指南
MC9S08DN60AMLH（64-lqfp, 10 x 10 mm 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： MC9S08DN60AMLH.
請參閱 資料表 以查看完整腳位配置。
典型應用
MC9S08DN60AMLH 適用於 6 應用s: Automotive LIN Control Modules, Industrial Instrument Panels, Small Motor and Actuator Control, Cost-Sensitive Sensor and Interface Hubs, Human-Machine Interface and Keypad Systems, Embedded Automotive Body-Control Logic.
Automotive LIN Control Modules
MC9S08DN60AMLH fits a LIN-connected control module where an 8-bit MCU must coordinate remote sensors, switches, or actuators without adding a separate communications controller. Its verified 40 MHz HCS08 core provides processing headroom for protocol handling, debounce logic, diagnostics, and application control, while the advertised LIN master capability supports network communication. The 2 KB RAM and 60 KB Flash provide space for protocol tables and firmware. Use the exact NXP pinout and electrical limits to assign LIN, wake, reset, and debug functions; because the part is NRND, production sourcing requires lifecycle confirmation.
推薦
Industrial Instrument Panels
The MC9S08DN60AMLH is suitable for compact instrument panels or operator interfaces that combine display drive, analog sensing, and serial communications. Its LCD driver reduces the need for a separate display controller, and its 10-bit ADC can sample control or sensor inputs, although the verified data does not specify ADC input count or accuracy. The 40 MHz CPU can service display updates, button handling, communication, and control logic. Place the MCU and LCD interface according to the manufacturer package and pin-multiplexing requirements, and validate timing under worst-case display loading.
推薦
Small Motor and Actuator Control
MC9S08DN60AMLH can serve as the supervisory controller in small actuator, relay, or motor-control products where an 8-bit architecture is sufficient and fast control-loop execution is useful. The verified 40 MHz maximum CPU frequency provides more timing margin than many low-end 8-bit devices, allowing the firmware to combine digital I/O, ADC monitoring, serial diagnostics, and protection logic. It does not replace a dedicated high-current motor driver; instead, it can generate control commands and monitor feedback. Confirm timer availability, PWM resources, pin multiplexing, thermal requirements, and motor-driver timing from the manufacturer documentation.
推薦
Cost-Sensitive Sensor and Interface Hubs
The MC9S08DN60AMLH is appropriate for a compact sensor hub or interface module that needs local acquisition, protocol handling, and configuration storage. The 10-bit ADC supports basic analog measurement, while 2 KB RAM handles transient data and 60 KB Flash stores application and configuration code. Multiple serial interfaces allow the design to bridge external sensors or a host controller, although the verified sources do not enumerate all peripheral instances or protocol modes. Validate sensor bandwidth, ADC sampling requirements, clock accuracy, and serial electrical levels during hardware bring-up.
推薦
Human-Machine Interface and Keypad Systems
MC9S08DN60AMLH can be used in a keypad or human-machine interface subsystem that requires a display driver, digital inputs, and serial communications in one controller. Its LCD-driver capability simplifies display-oriented designs, while the 40 MHz CPU supports responsive scanning, debounce, state management, and communication tasks. The 60 KB Flash provides room for larger application logic than many constrained 8-bit controllers. Confirm display voltage levels, segment mapping, input debounce strategy, and package pin assignment using the official datasheet before layout release.
推薦
Embedded Automotive Body-Control Logic
The MC9S08DN60AMLH is a logical candidate for body-control logic that coordinates switches, lamps, sensors, and communication tasks in an embedded vehicle application. Its enhanced HCS08 core, 40 MHz clock, 60 KB Flash, and LIN master capability provide the basic resources for distributed control. The LCD driver may support simple local indication, while the ADC can support analog monitoring. Exact automotive suitability depends on temperature grade, qualification, transient immunity, LIN electrical compliance, and package reliability, none of which are fully specified in the supplied verified snippets; obtain the complete NXP documentation before approval.
推薦
推薦產品摘要
工程參考資料，適用於 MC9S08DN60AMLH — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | S9S08DZ60F2MLHR | S9S08DZ60F2MLH | S9S08DZ60F1VLH | MC9S08AC60CPUE | MC9S08AW32CPUE |
|---|---|---|---|---|---|---|
| Package | 64-LQFP, 10 x 10 mm | 64-LQFP | 64-LQFP | 64-LQFP | 64-LQFP | 64-LQFP |
| Brand | NXP Semiconductors | Freescale Semiconductor | Freescale Semiconductor | Freescale Semiconductor | Freescale Semiconductor | Freescale Semiconductor |
主要差異化特點
- Integrated application-specific peripherals (對比MC9S08AC60CPUE)
- Verified processing and memory configuration (對比MC9S08AW32CPUE)
- Known manufacturer product status (對比S9S08DZ60F2MLH)
- Directly identified supplier reference (對比S9S08DZ60F2MLHR)
設計說明
Treat the 64-LQFP 10 x 10 mm footprint as a fixed mechanical constraint. Before layout release, compare the land pattern, pin-one orientation, courtyard, solder-paste recommendation, and assembly thermal profile against the current NXP package drawing. The supplied web data confirms the package and size but does not provide the complete pin map, so do not infer LCD, ADC, LIN, reset, clock, or debug assignments from distributor summaries.
Validate power rails, decoupling, and signal-level compatibility against the full manufacturer datasheet before connecting external modules. The verified snippets identify an 8-bit MCU but do not provide the device's complete supply-voltage range, absolute maximum ratings, pin-level limits, or ADC reference details. Use the manufacturer recommendations for bypass capacitors and operating conditions rather than assuming compatibility with another S08 part.
NRND status does not mean the part is immediately obsolete, but it does affect new-design risk. Check NXP lifecycle notices, product-change notices, authorized inventory, and firmware support before committing to a launch. For an existing design, preserve the original part number and verify any substitute for 40 MHz operation, 60 KB Flash, 2 KB RAM, LCD drive, 10-bit ADC, LIN master behavior, pin mapping, and debug access.
The supplied data does not state the operating-temperature range or package thermal resistance for MC9S08DN60AMLH. Therefore, thermal design must use the current NXP datasheet and the actual board construction, copper area, ambient temperature, switching activity, and regulator efficiency. Do not infer automotive or industrial temperature suitability from the application description alone.
合規資訊
The verified NXP page and distributor snippets do not provide authoritative RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. These fields remain unknown rather than inferred from automotive or industrial positioning.