S9S08DZ60F2MLH - 8-bit S08 MCU, 60KB Flash, CAN | NXP
MPN： S9S08DZ60F2MLH ✓ 啟用中S9S08DZ60F2MLH 概覽
An 8-bit microcontroller is an integrated circuit that executes program code on a CPU processing 8-bit data words, combining processor core, memory, and peripherals on a single chip. Within the power-management and embedded-control hierarchy, the S08DZ family sits in NXP's automotive 8-bit lineup, one tier below the 16-bit S12 series, and is typically used for body electronics, gateway assistants, and control nodes rather than high-compute processing.
Key features include the 40 MHz S08 core with a maximum internal bus clock of 20 MHz, 60 KB of in-system-programmable flash, an msCAN controller for CAN 2.0 A/B networking, and an integrated LCD driver. The device also integrates a 12-channel, 12-bit ADC (per LCSC listing), a real-time counter, serial peripherals (SCI, SPI, IIC), and operates from a 3.3 V or 5 V supply.
The S08 core uses a CISC architecture with efficient addressing modes and single-cycle access to RAM, making C-compiler code density strong for 8-bit applications. The flash supports in-circuit programming through the background debug interface (BDM), simplifying field firmware updates in automotive modules. The -40 C to +125 C ambient rating and NXP automotive qualification make it suitable for under-hood-adjacent and body-control environments.
Typical applications include automotive body control modules, HVAC controllers, instrument clusters with LCD drive, CAN-networked sensor nodes, and industrial control systems requiring a robust 8-bit MCU with CAN connectivity.
When designing with this device, verify the flash programming voltage and use the on-chip FLL to derive the 40 MHz core clock from a low-cost crystal, keeping EMI low in CAN-heavy systems.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
直接替換替代品，適用於 S9S08DZ60F2MLH — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： S9S08DZ60F2MLH （相同外形與佔位） — 差異在於 Core Architecture, Instruction Set, RAM, Package, ADC.
MC9S08DZ60AMLH
✅ 直接替換📋 參考替代品（不在目錄中）
S9S08DZ60F1MLH
✅ 直接替換📋 參考替代品（不在目錄中）
S9S08DZ60F2MLC
✅ 直接替換📋 參考替代品（不在目錄中）
S9S08DZ48F1CLH
✅ 直接替換聯絡詢價
查看資料表 →MC9S08DZ96CLH
✅ 直接替換聯絡詢價
查看資料表 →S9S08DZ32F1MLF
✅ 直接替換聯絡詢價
查看資料表 →MC9S08GB60ACFUER
✅ 直接替換📋 參考替代品（不在目錄中）
S9S08DZ60F2MLH 最大額定值與電氣特性
| Core Processor | S08 (HCS08), 8-bit |
| Core Architecture | CISC |
| 最大時脈頻率 | 40 MHz |
| Flash Memory | 60 KB (60K x 8) |
| 供應電壓 | 3.3 V / 5 V |
| 工作溫度 | -40 C to +125 C |
| 封裝 | 64-LQFP (10x10 mm) |
| 安裝類型 | Surface Mount |
| CAN Module | msCAN (CAN 2.0 A/B) |
| LCD Driver | Integrated (per NXP product page) |
| ADC Resolution | 12-bit |
| Qualification | Automotive Qualified |
| Packaging | Tray |
| Peripherals | SCI, SPI, IIC, RTC, PWM |
S9S08DZ60F2MLH 64-lqfp (10x10 mm) 腳位配置指南
S9S08DZ60F2MLH（64-lqfp (10x10 mm) 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： S9S08DZ60F2MLH.
請參閱 資料表 以查看完整腳位配置。
典型應用
S9S08DZ60F2MLH 適用於 6 應用s: Automotive Body Control Modules, Instrument Clusters with LCD Drive, HVAC Control Units, Industrial CAN Sensor Nodes, Gateway and Legacy Control Card Rebuild, Battery-Backed Monitoring and Telemetry Units.
Automotive Body Control Modules
The S9S08DZ60F2MLH fits body control modules (BCM) because it combines an automotive-qualified -40 C to +125 C temperature rating with an integrated msCAN controller and 60 KB flash for lamp, door, and load-management logic. The 40 MHz S08 core provides sufficient headroom for CAN message filtering and timed I/O scanning, while the 12-bit ADC reads switch and sensor inputs with resolution adequate for threshold detection. Placed on the vehicle CAN bus as a slave node, the MCU handles network management and diagnostic (UDS-style) messaging in flash, and its in-circuit programmable memory supports end-of-line configuration without removing the module from the vehicle.
推薦
Instrument Clusters with LCD Drive
Instrument clusters benefit directly from the S9S08DZ60F2MLH's integrated LCD driver, which drives segment and basic matrix LCDs without an external controller, reducing BOM cost and board area in a 10x10 mm 64-LQFP footprint. According to NXP, the S08DZ60 family was designed specifically for automotive and industrial applications needing LCD drive plus CAN. The 40 MHz core updates display segments and manages multiplexed keypad scanning while servicing periodic CAN messages from the vehicle network. The 12-bit ADC samples fuel-level, temperature, and voltage inputs, and the flash-resident firmware supports odometer data retention and variant configuration, with the -40 C to +125 C rating covering harsh cabin and windshield-adjacent environments.
推薦
HVAC Control Units
Automotive and industrial HVAC controllers match the S9S08DZ60F2MLH well: the integrated LCD driver displays setpoints and status on low-cost segment panels, the 12-bit ADC reads NTC temperature sensors and potentiometer user inputs, and the msCAN module connects the controller to the vehicle network for zone commands and diagnostic queries. The 40 MHz S08 core executes PID-style blower and blend-door control loops with deterministic timing, while 60 KB flash holds multiple calibration tables and fault-log code. Its 5 V operation simplifies interfacing with legacy actuator drivers, and the automotive -40 C to +125 C qualification covers under-dash thermal conditions reliably.
推薦
Industrial CAN Sensor Nodes
In industrial networks, the S9S08DZ60F2MLH serves as a compact CAN sensor node: the msCAN controller handles CAN 2.0 A/B framing in hardware, freeing the 40 MHz S08 core for signal conditioning, filtering, and local control logic. The 12-bit ADC digitizes 4-20 mA-derived or ratiometric sensor signals, and 60 KB flash stores node configuration, scaling coefficients, and a lightweight CANopen- or J1939-style protocol stack. Operation at 3.3 V or 5 V lets designers match the node to existing logic rails, and the extended -40 C to +125 C range suits cabinets near motors or outdoor enclosures. The 64-LQFP exposes ample GPIO for status LEDs and local I/O.
推薦
Gateway and Legacy Control Card Rebuild
A documented real-world use case is rebuilding legacy control cards originally built around the MC9S08DZ60: NXP community discussions confirm the S9S08DZ60F2MLH as the equivalent continuation of that die for card repairs, making it a practical choice for service organizations maintaining 8-bit automotive controllers from the 2010s. Because the 64-LQFP footprint and 60 KB flash match, existing firmware binaries and programming fixtures carry over, and the msCAN plus LCD driver retain all original peripheral functionality. This reduces requalification effort to a die-revision review of NXP product change notices rather than a full redesign, keeping spare-part economics viable for low-volume service production.
推薦
Battery-Backed Monitoring and Telemetry Units
The S9S08DZ60F2MLH suits battery-backed monitoring units because its S08 core offers low-power wait and stop modes suitable for duty-cycled data logging, while the real-time counter maintains timekeeping between wakeups. The 12-bit ADC samples battery voltage, temperature, and load-current sense lines at the resolution needed for coulomb-style estimation, and 60 KB flash logs event histories and stores parameter sets. When a vehicle or industrial CAN bus is present, the msCAN module reports telemetry without an external controller; the LCD driver option enables local status panels on service tools. The 3.3 V or 5 V supply flexibility simplifies integration with both automotive 12 V-derived and single-cell Li-ion-derived rails.
推薦
推薦產品摘要
工程參考資料，適用於 S9S08DZ60F2MLH — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MC9S08DZ60AMLH | S9S08DZ60F1MLH | S9S08DZ48F1CLH | MC9S08GB60ACFUER |
|---|---|---|---|---|---|
| Package | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same | 64-LQFP - same | 64-LQFP (10x10 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core / Max Clock | S08, 40 MHz | S08, 40 MHz | S08, 40 MHz | S08, 40 MHz | S08, 40 MHz |
| Flash Memory | 60 KB | 60 KB | 60 KB | 48 KB | 60 KB |
主要差異化特點
- Integrated LCD driver saves an external segment driver (對比MC9S08GB60ACFUER)
- Largest mainstream flash option in the DZ pin-compatible family (對比S9S08DZ48F1CLH)
- Active automotive-qualified continuation of the legacy MC9S08DZ60 die (對比MC9S08DZ60AMLH)
設計說明
The F2 suffix in S9S08DZ60F2MLH denotes a specific die mask/revision ordering code. When substituting the MC9S08DZ60AMLH predecessor or an F1-mask part, review NXP product change notices (PCN) and errata for the target mask: flash timing parameters and documented errata can differ between revisions even when the pinout is identical. Always re-run flash programming and CAN timing validation on the exact ordering code before releasing the production build.
The device operates from 3.3 V or 5 V, so define the rail early in the design. In 12 V automotive systems, use a 5 V pre-regulator with load-dump transient protection upstream of the MCU. Estimated: an S08 core at 40 MHz with active peripherals typically draws tens of milliamps, so a low-cost linear regulator is acceptable at the board level, but verify per the datasheet IDDA/IDDB figures for your clock configuration rather than assuming this estimate.
For CAN networks, place the CAN transceiver (e.g., MCP2551-class device) close to the msCAN pins, keep the TxCAN/RxCAN traces short and length-matched, and use a common ground plane under the transceiver. Decouple VDD with 0.1 uF ceramics placed within 2 mm of the supply pins, and add bulk 4.7-10 uF near the regulator. Route the crystal with short traces and a guard ground to reduce EMI when the FLL multiplies to the 40 MHz core clock.
Estimated: with typical MCU active current on the order of 20-40 mA at 5 V, power dissipation is roughly 0.1-0.2 W, which the 64-LQFP (10x10 mm) package dissipates without any heatsink, even at +125 C ambient. Thermal design only becomes relevant if the MCU also drives high LCD backplane or GPIO loads; budget those currents against per-pin limits in the datasheet.
合規資訊
The part is described as Automotive Qualified by NXP/Mouser listings; specific AEC-Q100 grade, RoHS/REACH status, and lead-free data are not stated in the provided web data and must be confirmed on the NXP product page quality/environmental section.