Microchip Technology

MCP3422A2-E/MC - 18-Bit Dual-Channel Delta-Sigma ADC | Microchip Technology

MPN: MCP3422A2-E/MC ✓ 啟用中
2.7 V to 5.5 V Vdss 8-VFDFN exposed pad, 2 mm x 3 mm Package
MOQ: 1 |

MCP3422A2-E/MC 概覽

The Microchip Technology MCP3422A2-E/MC is an 18-bit, dual-channel delta-sigma analog-to-digital converter with differential inputs, an integrated 2.048 V precision reference, and an I2C interface. It operates from a 2.7 V to 5.5 V digital supply and is available in an 8-VFDFN exposed-pad surface-mount package. The converter supports input ranges up to plus or minus 2.048 V differentially when the onboard reference is used.

A delta-sigma ADC is a voltage-regulating measurement category that converts continuous analog signals into high-resolution digital values using oversampling and digital filtering. The MCP3422A2 belongs to the analog-to-digital converter hierarchy, which sits within data-acquisition ICs, signal-chain ICs, and broader semiconductor systems. Its differential architecture reduces sensitivity to common-mode noise when sensors, bridges, or transducers are connected to the two analog inputs.

The device combines two differential analog input channels with 18-bit resolution and conversion rates up to 240 samples per second. The integrated 2.048 V reference simplifies designs that do not require an external precision reference. The I2C interface reduces the number of communication pins required by a host microcontroller, while selectable device-address configurations help avoid bus conflicts when several converters share the same two-wire bus.

The MCP3422A2-E/MC is suitable for industrial process monitoring, sensor-interface boards, instrumentation, low-frequency measurement systems, and embedded data-acquisition designs. Differential inputs are particularly useful for measuring small signals from current shunts, resistive bridges, pressure transducers, and other transducers where a second input can provide a reference or cancellation path. The low-noise architecture is intended for applications that value resolution and input accuracy more than very high sampling rates.

The principal design trade-off is throughput versus resolution and conversion latency. The 18-bit conversion process requires digital filtering, so applications requiring continuous high-speed sampling should account for the specified conversion-time and data-availability behavior. The exposed pad also needs a properly designed thermal and grounding layout to avoid degrading accuracy or increasing supply-noise coupling.

This page combines manufacturer specifications, distributor listing data, package information, application guidance, and practical design notes to help engineers evaluate the MCP3422A2-E/MC for precision low-speed measurement designs.

直接替換替代品,適用於 MCP3422A2-E/MC — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: MCP3422A2-E/MC (相同外形與佔位) — 差異在於 Package, Differential Input Range, Digital Interface, Automotive Qualification, Operating Temperature Range.

Microchip Technology
Package: 8-pin DFN with exposed pad, 2 x 3 mm
Differential Input Range: ±2.048 V
Digital Interface: I2C
Microchip Technology
Package: 8-DFN, 2 x 3 mm
Differential Input Range: ±2.048 V
Digital Interface: 2-wire I2C
Microchip Technology
Package: 8-MSOP
Differential Input Range: +/-2.048 V
Operating Temperature Range: -40 C to +125 C
Microchip Technology
Package: 8-pin DFN (2 mm x 3 mm)
Differential Input Range: -2.048 V to +2.048 V
Automotive Qualification: AEC-Q100 grade indicated for the A3 family
Microchip Technology
Package: 8-DFN, 2x3 mm
Differential Input Range: ±2.048 V
Digital Interface: I2C
Microchip Technology
Package: 8-DFN, 2 x 3 mm
Differential Input Range: ±2.048 V
Digital Interface: I2C, 2-wire

MCP3422A0-E/MC

✅ 直接替換
Microchip Technology
📦 8-VFDFN exposed pad (2 x 3 mm)
18 bit · 2 differential inputs · Sigma-delta · 1 · 3.75 samples per second · 4 samples per second · 2.048 V · ±2.048 V

聯絡詢價

查看資料表 →

MCP3422A6-E/MC

✅ 直接替換
Microchip Technology
📦 8-VFDFN exposed pad (2 x 3 mm)
Up to 18 bits · 2 channels · Differential inputs · Delta-sigma ADC · 240 SPS · 2.048 V · ±2.048 V · 4.096 V

聯絡詢價

查看資料表 →

MCP3422A1-E/MC

✅ 直接替換 ⚠️ 規格未經驗證
Microchip Technology
📦 8-VFDFN exposed pad (2 x 3 mm)
Delta-sigma ADC · 18 bits · 2 channels · Differential · 240 samples per second · 2.048 V · ±2.048 V · 2.7 V

聯絡詢價

查看資料表 →

MCP3422A3-E/MC

✅ 直接替換 ⚠️ 規格未經驗證
Microchip Technology
📦 8-VFDFN exposed pad (2 x 3 mm)
Delta-sigma ADC · 18 bits · 2 channels · Differential · I2C · 2.048 V · -2.048 V to +2.048 V · 2.7 V to 5.5 V

聯絡詢價

查看資料表 →

MCP3422A4-E/MC

✅ 直接替換 ⚠️ 規格未經驗證
Microchip Technology
📦 8-VFDFN exposed pad (2 x 3 mm)
18 bit · 2 channels · Differential · Delta-sigma · 4 samples/s · 2.048 V · ±2.048 V · 2.7 V to 5.5 V

聯絡詢價

查看資料表 →

MCP3422A2-E/MC 最大額定值與電氣特性

ADC Type Delta-sigma ADC
解析度 18 bit
Number of Analog Input Channels 2 differential channels
Input Architecture Differential inputs
Digital Supply Voltage 2.7 V to 5.5 V
Internal Reference Voltage 2.048 V
Differential Input Range Plus or minus 2.048 V
Maximum Conversion Rate 240 samples per second
介面 I2C, 2-wire
工作溫度 -40 C to +125 C
封裝 8-VFDFN exposed pad, 2 mm x 3 mm
安裝類型 Surface mount
Manufacturer Microchip Technology
Product Category Data acquisition - analog to digital converters
Reference On-board precision reference
供應電壓 2.7 V to 5.5 V
Device Description 18-bit multi-channel delta-sigma ADC with I2C interface and onboard reference

MCP3422A2-E/MC 腳位配置

DFN-8 Package Pinout Diagram DFN-8 2x2mm, P0.5mm, EP 0.9x1.7mm, JEDEC MO-229. 1 8 2 7 3 6 4 5 DFN-8
腳位 1 VDD — Digital supply connection
腳位 2 VIN0+ — Positive input for analog channel 0
腳位 3 VIN0- — Negative input for analog channel 0
腳位 4 VIN1+ — Positive input for analog channel 1
腳位 5 VIN1- — Negative input for analog channel 1
腳位 6 SCL — I2C serial clock
腳位 7 SDA — I2C serial data
腳位 8 VSS — Ground connection; exposed pad handled according to package documentation

典型應用

MCP3422A2-E/MC 適用於 6 應用s: Industrial Process Measurement, Current-Shunt and Bridge Sensing, Low-Frequency Environmental Sensing, Precision Instrumentation and Test Equipment, Embedded Data-Acquisition Modules, Automotive and Equipment Monitoring.

🏭

Industrial Process Measurement

The MCP3422A2-E/MC is appropriate for slow industrial process variables such as pressure, temperature, and flow-derived analog signals. Its two differential channels support measuring a sensor output against a reference or second sensing element, while 18-bit resolution provides useful headroom for signals near the lower end of the input range. The 2.048 V onboard reference allows a compact implementation without a separate reference IC. At up to 240 samples per second, the converter suits process loops and monitoring channels that do not require waveform acquisition. Use differential routing, shielded interconnects, and input filtering to suppress industrial noise.

⚡

Current-Shunt and Bridge Sensing

For current-shunt, resistive-bridge, and strain-related measurements, the differential inputs of the MCP3422A2-E/MC help reject common-mode voltage present on both sensor lines. The integrated 2.048 V reference simplifies ratiometric and bridge excitation arrangements when the excitation source is stable, while the 18-bit conversion resolution supports high-gain measurements after analog amplification. The two input channels can also be used for a differential measurement plus a second diagnostic channel. Keep shunt and bridge traces short, symmetrical, and separated from switching nodes to preserve the common-mode rejection advantage.

🧩

Low-Frequency Environmental Sensing

The MCP3422A2-E/MC works well for environmental sensors whose outputs change slowly, including gas, humidity, light, and pressure sensors with analog interfaces. Eighteen-bit resolution can resolve small changes in a modest sensor output, and the differential input arrangement can reduce offset from shared supply or ground disturbances. The device operates from 2.7 V to 5.5 V, allowing integration with both low-voltage sensor nodes and common 3.3 V embedded systems. For remote sensing cables, add protection and filtering at the connector rather than relying on digital filtering alone.

🔧

Precision Instrumentation and Test Equipment

Instrumentation and bench-test products can use the MCP3422A2-E/MC to digitize low-level differential measurements while communicating results over I2C to a controller or display processor. The 2.048 V internal reference and 18-bit resolution are useful in designs requiring repeatable measurements from transducers rather than a high-frequency waveform capture. Its small DFN package also helps reduce instrument footprint. For laboratory-grade accuracy requirements, calibrate the system against a traceable external reference and account for input bias current, offset, and noise in the complete analog front end.

📱

Embedded Data-Acquisition Modules

Compact data-acquisition modules can use the MCP3422A2-E/MC to add two high-resolution analog measurement channels to an embedded controller. The I2C interface reduces wiring and pin count compared with a parallel ADC, while the integrated reference keeps the external component count low. The part is appropriate for monitoring configurable systems where channels change relatively slowly and the controller handles filtering or scaling in firmware. Use the device's conversion-status and data-availability timing correctly so that the controller does not read a result before the previous conversion has completed.

🚗

Automotive and Equipment Monitoring

The -40 C to +125 C operating-temperature rating makes the MCP3422A2-E/MC a candidate for equipment monitoring across industrial and automotive-adjacent environments, subject to the qualification requirements of the final product. Differential inputs can monitor shunt drops, resistive dividers, or sensor bridges where the measured signal is small and the environment is electrically noisy. The compact 8-VFDFN footprint supports dense controller boards. Automotive designs must separately confirm AEC-Q100 qualification for the exact ordering code and implement the transient, ESD, and load-dump protection required by the vehicle electrical environment.

What is the MCP3422A2-E/MC?
The MCP3422A2-E/MC is a Microchip Technology 18-bit, dual-channel delta-sigma analog-to-digital converter with differential inputs, an integrated 2.048 V reference, and an I2C interface. According to the manufacturer product page, it supports a differential input range of plus or minus 2.048 V and is packaged in an 8-VFDFN exposed-pad surface-mount package.
What is the operating voltage of MCP3422A2-E/MC?
The MCP3422A2-E/MC operates from a 2.7 V to 5.5 V digital supply. The manufacturer product information identifies the device as a low-noise, high-accuracy delta-sigma converter, while distributor specifications list the operating supply range as 2.7 V through 5.5 V. The analog input range is set by the device reference and external input-network design.
How many channels and bits does MCP3422A2-E/MC have?
The MCP3422A2-E/MC has two differential input channels and provides up to 18 bits of resolution. The Microchip Technology product page describes it as a two-channel delta-sigma converter, and the distributor listing identifies the device as an 18-bit ADC with two inputs. It is therefore suited to simultaneous or sequential differential signal acquisition.
What is the maximum sampling rate of MCP3422A2-E/MC?
The maximum conversion rate is 240 samples per second for the MCP3422A2-E/MC. This figure appears in the manufacturer-linked datasheet listings for the part. Because the converter uses delta-sigma modulation and digital filtering, application design should allow for conversion latency and data-availability timing rather than treating the sample rate as a real-time waveform-capture rate.
Where can I download the MCP3422A2-E/MC datasheet PDF?
The official MCP3422 datasheet is available through the Microchip Technology product page at https://www.microchip.com/en-us/product/MCP3422. The product page links the manufacturer documentation for the MCP3422 family, including the MCP3422A2-E/MC ordering configuration. Use the pin-description table in that datasheet when assigning PCB tracks and confirming exposed-pad connections.
What is the pinout of MCP3422A2-E/MC?
The MCP3422A2-E/MC uses an 8-VFDFN exposed-pad package with power, ground, analog-input, I2C, and address-selection connections. The package drawing and pin-description table in the manufacturer datasheet are the authoritative reference for numbering. The exposed pad must be connected according to the recommended land pattern and thermal design in that documentation.
Does MCP3422A2-E/MC have an internal reference?
Yes, the MCP3422A2-E/MC includes an onboard precision reference voltage. The manufacturer product page specifies a 2.048 V onboard reference and an input range of plus or minus 2.048 V differentially. This allows a measurement design to operate without a separate external reference when the application does not require a different reference source.
Can MCP3422A2-E/MC replace MCP3422A0-E/MC?
The MCP3422A0-E/MC is listed by DigiKey as a parametric equivalent of the MCP3422A2-E/MC, and both use the same 8-VFDFN package family. The main device-specific distinction is the I2C address configuration associated with the A0 versus A2 option. Verify the address pins, reference configuration, and application timing before treating one ordering code as a drop-in replacement.
What is the best drop-in replacement for MCP3422A2-E/MC?
The closest documented drop-in option is the Microchip Technology MCP3422A0-E/MC, which DigiKey identifies as a parametric equivalent for the MCP3422A2-E/MC. Other same-family MCP3422 address variants can share the same 8-pin DFN footprint, but their I2C address selection must match the host firmware. Confirm the datasheet pin configuration before ordering a replacement.
When should I choose MCP3422A2-E/MC over a lower-speed ADC?
Choose the MCP3422A2-E/MC when the design needs 18-bit resolution, differential measurements, an integrated 2.048 V reference, and an I2C interface in a compact 8-VFDFN package. A lower-speed or lower-resolution converter may be preferable when the required signal bandwidth is very low, power consumption dominates, or the host system already provides an external reference. The device supports conversion rates up to 240 samples per second.
What is the difference between MCP3422A2-E/MC and MCP3422A6-E/MC?
The MCP3422A2-E/MC and MCP3422A6-E/MC are same-family Microchip converters, but their ordering options include different I2C address selections. Both retain the two-channel, 18-bit delta-sigma architecture and the 8-VFDFN package configuration used by the MCP3422 family. Firmware and bus planning must use the address option actually fitted, so the two are not interchangeable without checking address pins.
Is MCP3422A2-E/MC suitable for industrial sensor measurements?
Yes, the MCP3422A2-E/MC is suitable for low-speed industrial sensor and process-measurement applications. Its differential inputs help reject common-mode noise, its 18-bit resolution supports precise signal measurement, and its -40 C to +125 C operating-temperature specification covers industrial environments. The design must still provide appropriate input filtering, grounding, and protection.
How should the MCP3422A2-E/MC exposed pad be handled?
The exposed pad should be connected using the recommended land pattern and thermal-via arrangement shown in the manufacturer datasheet. It supports heat transfer from the device and is normally tied to the appropriate ground plane according to the package documentation. Poor pad connection or inadequate copper can increase junction temperature and reduce measurement performance.
Where can I buy MCP3422A2-E/MC?
The MCP3422A2-E/MC can be requested through the Request a Quote form on this XAIPART product page. The form is the appropriate channel for current price, stock, and lead-time confirmation. The manufacturer product page also provides technical documentation for the device, while distributor listings are useful for confirming market availability.
What is the price of MCP3422A2-E/MC?
Current commercial pricing for the MCP3422A2-E/MC should be requested through the Request a Quote form on this page. A published distributor listing shows a unit-price reference for this exact MPN, but the quote form provides the current commercial terms, quantity breaks, and availability. Use the form rather than relying on a historical listing price.
What is the lead time and stock status for MCP3422A2-E/MC?
Request current stock, minimum order quantity, and lead time through the Request a Quote form on this XAIPART page. The verified distributor listings show different inventory positions across sources, so stock status is time-dependent and should be confirmed at order time. Microchip product documentation remains the authority for technical and lifecycle information.

工程參考資料,適用於 MCP3422A2-E/MC — 比較、設計指引及合規資訊。

選型指南

Select the MCP3422A2-E/MC for low-frequency precision measurements requiring two differential channels, 18-bit resolution, an integrated 2.048 V reference, and an I2C host interface. It is particularly appropriate when board area is constrained and the exposed-pad layout can be implemented correctly. Choose the MCP3422A0-E/MC or another same-family address variant when the required I2C address differs, but update firmware and verify the address configuration. A SOIC ordering option may be easier to assemble on a through-hole-compatible or manually soldered prototype, although it occupies more PCB area and is not a package drop-in replacement for the DFN version. For designs needing faster sampling, lower power, or a different measurement architecture, choose an ADC with a higher conversion rate or a more specialized input stage. Always confirm the exact suffix, package, exposed-pad connection, and lifecycle status before releasing production artwork.

與替代品比較

參數 本產品 MCP3422A0-E/MC MCP3422A6-E/MC MCP3422A1-E/MC MCP3422A3-E/MC MCP3422A4-E/MC
Package 8-VFDFN exposed pad (2 x 3 mm) 8-VFDFN exposed pad 8-VFDFN exposed pad 8-VFDFN exposed pad 8-VFDFN exposed pad 8-VFDFN exposed pad
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Resolution 18 bit 18 bit 18 bit 18 bit 18 bit 18 bit
Input Channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels
Digital Supply Range 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V
Internal Reference 2.048 V 2.048 V 2.048 V 2.048 V 2.048 V 2.048 V
Maximum Conversion Rate 240 samples per second 240 samples per second 240 samples per second 240 samples per second 240 samples per second 240 samples per second
Operating Temperature -40 C to +125 C -40 C to +125 C -40 C to +125 C -40 C to +125 C -40 C to +125 C -40 C to +125 C
I2C Address Configuration A2 ordering option A0 ordering option A6 ordering option A1 ordering option A3 ordering option A4 ordering option

主要差異化特點

  • 18-bit resolution with two differential input channels (對比MCP3422A0-E/MC)
  • Integrated precision reference simplifies the analog front end (對比MCP3422A6-E/MC)
  • Compact 8-VFDFN package with exposed thermal pad (對比MCP3422A2-E/SN)

設計說明

Route the two differential input pairs as tightly coupled, symmetrical traces and keep them away from switching-regulator outputs, digital clocks, and relay-control nets. Place any input-series resistors or RC filters close to the connector or sensor source. The MCP3422A2-E/MC is a low-frequency precision converter, so clean analog routing and shielding usually provide more benefit than aggressive digital averaging.

Follow the manufacturer's exposed-pad land pattern and thermal-via guidance for the 8-VFDFN package. The exposed pad is a heat-transfer and electrical-return feature, not an optional footprint detail; connect it as directed in the datasheet and provide nearby ground copper. Although the ADC's dissipation is generally modest, adequate pad connection improves temperature stability and reduces supply-noise coupling.

Do not assume that a different MCP3422 suffix is automatically interchangeable in an existing design. The A0, A2, A6, and other address options affect the I2C bus address, and the -E temperature grade and package option are part of the ordering code. Confirm the exact suffix, address pins, exposed-pad connection, and firmware settings before replacing the MCP3422A2-E/MC.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status were not explicitly stated in the manufacturer or distributor data for this exact ordering code. Confirm the compliance documents for the selected package and shipping configuration.

相關搜尋

MCP3422A2-E/MC datasheet MCP3422A2-E/MC pinout MCP3422A2-E/MC datasheet pdf MCP3422A2-E/MC equivalent MCP3422A2-E/MC replacement MCP3422A2-E/MC drop-in substitute MCP3422A2-E/MC price MCP3422A2-E/MC stock MCP3422A2-E/MC I2C address MCP3422A2-E/MC 8-DFN package Microchip MCP3422A2-E/MC MCP3422A2-E/MC vs MCP3422A0-E/MC

相關元件與詞彙

Microchip Technology MCP3422A2-E/MC MCP3422A0-E/MC MCP3422A6-E/MC MCP3422A1-E/MC MCP3422A3-E/MC MCP3422A4-E/MC MCP3422 delta-sigma ADC analog-to-digital converter data-acquisition IC differential input I2C interface onboard precision reference 2.048 V reference 18-bit resolution 240 samples per second 8-VFDFN exposed pad surface-mount package industrial process measurement current-shunt sensing resistive bridge sensing sensor interface RoHS REACH AEC-Q100
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情