MCP3422A2-E/MC - 18-Bit Dual-Channel Delta-Sigma ADC | Microchip Technology
MPN: MCP3422A2-E/MC ✓ Hoạt độngMCP3422A2-E/MC Tóm tắt
A delta-sigma ADC is a voltage-regulating measurement category that converts continuous analog signals into high-resolution digital values using oversampling and digital filtering. The MCP3422A2 belongs to the analog-to-digital converter hierarchy, which sits within data-acquisition ICs, signal-chain ICs, and broader semiconductor systems. Its differential architecture reduces sensitivity to common-mode noise when sensors, bridges, or transducers are connected to the two analog inputs.
The device combines two differential analog input channels with 18-bit resolution and conversion rates up to 240 samples per second. The integrated 2.048 V reference simplifies designs that do not require an external precision reference. The I2C interface reduces the number of communication pins required by a host microcontroller, while selectable device-address configurations help avoid bus conflicts when several converters share the same two-wire bus.
The MCP3422A2-E/MC is suitable for industrial process monitoring, sensor-interface boards, instrumentation, low-frequency measurement systems, and embedded data-acquisition designs. Differential inputs are particularly useful for measuring small signals from current shunts, resistive bridges, pressure transducers, and other transducers where a second input can provide a reference or cancellation path. The low-noise architecture is intended for applications that value resolution and input accuracy more than very high sampling rates.
The principal design trade-off is throughput versus resolution and conversion latency. The 18-bit conversion process requires digital filtering, so applications requiring continuous high-speed sampling should account for the specified conversion-time and data-availability behavior. The exposed pad also needs a properly designed thermal and grounding layout to avoid degrading accuracy or increasing supply-noise coupling.
This page combines manufacturer specifications, distributor listing data, package information, application guidance, and practical design notes to help engineers evaluate the MCP3422A2-E/MC for precision low-speed measurement designs.
Bộ thay thế dễ dàng lắp đặt cho MCP3422A2-E/MC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MCP3422A2-E/MC (cùng hình factor và footprint) — khác nhau ở Package, Differential Input Range, Digital Interface, Automotive Qualification, Operating Temperature Range.
MCP3422A0-E/MC
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MCP3422A6-E/MC
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MCP3422A1-E/MC
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →MCP3422A3-E/MC
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →MCP3422A4-E/MC
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →MCP3422A2-E/MC Tỷ lệ tối đa & tính chất điện
| ADC Type | Delta-sigma ADC |
| Độ phân giải | 18 bit |
| Number of Analog Input Channels | 2 differential channels |
| Input Architecture | Differential inputs |
| Digital Supply Voltage | 2.7 V to 5.5 V |
| Internal Reference Voltage | 2.048 V |
| Differential Input Range | Plus or minus 2.048 V |
| Maximum Conversion Rate | 240 samples per second |
| Giao diện | I2C, 2-wire |
| Nhiệt độ hoạt động | -40 C to +125 C |
| Hộp | 8-VFDFN exposed pad, 2 mm x 3 mm |
| Kiểu lắp đặt | Surface mount |
| Manufacturer | Microchip Technology |
| Product Category | Data acquisition - analog to digital converters |
| Reference | On-board precision reference |
| Điện áp cung cấp | 2.7 V to 5.5 V |
| Device Description | 18-bit multi-channel delta-sigma ADC with I2C interface and onboard reference |
Cấu hình chân MCP3422A2-E/MC
| Chân 1 | VDD — Digital supply connection |
| Chân 2 | VIN0+ — Positive input for analog channel 0 |
| Chân 3 | VIN0- — Negative input for analog channel 0 |
| Chân 4 | VIN1+ — Positive input for analog channel 1 |
| Chân 5 | VIN1- — Negative input for analog channel 1 |
| Chân 6 | SCL — I2C serial clock |
| Chân 7 | SDA — I2C serial data |
| Chân 8 | VSS — Ground connection; exposed pad handled according to package documentation |
Ứng dụng tiêu biểu
MCP3422A2-E/MC phù hợp cho 6 Áp dụngs: Industrial Process Measurement, Current-Shunt and Bridge Sensing, Low-Frequency Environmental Sensing, Precision Instrumentation and Test Equipment, Embedded Data-Acquisition Modules, Automotive and Equipment Monitoring.
Industrial Process Measurement
The MCP3422A2-E/MC is appropriate for slow industrial process variables such as pressure, temperature, and flow-derived analog signals. Its two differential channels support measuring a sensor output against a reference or second sensing element, while 18-bit resolution provides useful headroom for signals near the lower end of the input range. The 2.048 V onboard reference allows a compact implementation without a separate reference IC. At up to 240 samples per second, the converter suits process loops and monitoring channels that do not require waveform acquisition. Use differential routing, shielded interconnects, and input filtering to suppress industrial noise.
Được đề xuất
Current-Shunt and Bridge Sensing
For current-shunt, resistive-bridge, and strain-related measurements, the differential inputs of the MCP3422A2-E/MC help reject common-mode voltage present on both sensor lines. The integrated 2.048 V reference simplifies ratiometric and bridge excitation arrangements when the excitation source is stable, while the 18-bit conversion resolution supports high-gain measurements after analog amplification. The two input channels can also be used for a differential measurement plus a second diagnostic channel. Keep shunt and bridge traces short, symmetrical, and separated from switching nodes to preserve the common-mode rejection advantage.
Được đề xuất
Low-Frequency Environmental Sensing
The MCP3422A2-E/MC works well for environmental sensors whose outputs change slowly, including gas, humidity, light, and pressure sensors with analog interfaces. Eighteen-bit resolution can resolve small changes in a modest sensor output, and the differential input arrangement can reduce offset from shared supply or ground disturbances. The device operates from 2.7 V to 5.5 V, allowing integration with both low-voltage sensor nodes and common 3.3 V embedded systems. For remote sensing cables, add protection and filtering at the connector rather than relying on digital filtering alone.
Được đề xuất
Precision Instrumentation and Test Equipment
Instrumentation and bench-test products can use the MCP3422A2-E/MC to digitize low-level differential measurements while communicating results over I2C to a controller or display processor. The 2.048 V internal reference and 18-bit resolution are useful in designs requiring repeatable measurements from transducers rather than a high-frequency waveform capture. Its small DFN package also helps reduce instrument footprint. For laboratory-grade accuracy requirements, calibrate the system against a traceable external reference and account for input bias current, offset, and noise in the complete analog front end.
Được đề xuất
Embedded Data-Acquisition Modules
Compact data-acquisition modules can use the MCP3422A2-E/MC to add two high-resolution analog measurement channels to an embedded controller. The I2C interface reduces wiring and pin count compared with a parallel ADC, while the integrated reference keeps the external component count low. The part is appropriate for monitoring configurable systems where channels change relatively slowly and the controller handles filtering or scaling in firmware. Use the device's conversion-status and data-availability timing correctly so that the controller does not read a result before the previous conversion has completed.
Được đề xuất
Automotive and Equipment Monitoring
The -40 C to +125 C operating-temperature rating makes the MCP3422A2-E/MC a candidate for equipment monitoring across industrial and automotive-adjacent environments, subject to the qualification requirements of the final product. Differential inputs can monitor shunt drops, resistive dividers, or sensor bridges where the measured signal is small and the environment is electrically noisy. The compact 8-VFDFN footprint supports dense controller boards. Automotive designs must separately confirm AEC-Q100 qualification for the exact ordering code and implement the transient, ESD, and load-dump protection required by the vehicle electrical environment.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MCP3422A2-E/MC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MCP3422A0-E/MC | MCP3422A6-E/MC | MCP3422A1-E/MC | MCP3422A3-E/MC | MCP3422A4-E/MC |
|---|---|---|---|---|---|---|
| Package | 8-VFDFN exposed pad (2 x 3 mm) | 8-VFDFN exposed pad | 8-VFDFN exposed pad | 8-VFDFN exposed pad | 8-VFDFN exposed pad | 8-VFDFN exposed pad |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Resolution | 18 bit | 18 bit | 18 bit | 18 bit | 18 bit | 18 bit |
| Input Channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels |
| Digital Supply Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Internal Reference | 2.048 V | 2.048 V | 2.048 V | 2.048 V | 2.048 V | 2.048 V |
| Maximum Conversion Rate | 240 samples per second | 240 samples per second | 240 samples per second | 240 samples per second | 240 samples per second | 240 samples per second |
| Operating Temperature | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C |
| I2C Address Configuration | A2 ordering option | A0 ordering option | A6 ordering option | A1 ordering option | A3 ordering option | A4 ordering option |
Bảo phân biệt quan trọng
- 18-bit resolution with two differential input channels (vsMCP3422A0-E/MC)
- Integrated precision reference simplifies the analog front end (vsMCP3422A6-E/MC)
- Compact 8-VFDFN package with exposed thermal pad (vsMCP3422A2-E/SN)
Ghi chú thiết kế
Route the two differential input pairs as tightly coupled, symmetrical traces and keep them away from switching-regulator outputs, digital clocks, and relay-control nets. Place any input-series resistors or RC filters close to the connector or sensor source. The MCP3422A2-E/MC is a low-frequency precision converter, so clean analog routing and shielding usually provide more benefit than aggressive digital averaging.
Follow the manufacturer's exposed-pad land pattern and thermal-via guidance for the 8-VFDFN package. The exposed pad is a heat-transfer and electrical-return feature, not an optional footprint detail; connect it as directed in the datasheet and provide nearby ground copper. Although the ADC's dissipation is generally modest, adequate pad connection improves temperature stability and reduces supply-noise coupling.
Do not assume that a different MCP3422 suffix is automatically interchangeable in an existing design. The A0, A2, A6, and other address options affect the I2C bus address, and the -E temperature grade and package option are part of the ordering code. Confirm the exact suffix, address pins, exposed-pad connection, and firmware settings before replacing the MCP3422A2-E/MC.
Thông tin tuân thủ
RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status were not explicitly stated in the manufacturer or distributor data for this exact ordering code. Confirm the compliance documents for the selected package and shipping configuration.