MKL05Z8VFK4 - 48MHz Cortex-M0+ MCU, 8KB Flash | NXP
MPN: MKL05Z8VFK4 ✓ 啟用中MKL05Z8VFK4 概覽
A microcontroller is a programmable integrated circuit that combines a processor core, memory, peripherals, and input/output interfaces on one chip. The MKL05Z8VFK4 belongs to the Kinetis L series and provides a migration path from simple 8-bit designs into 32-bit embedded systems. Its Cortex-M0+ core uses the Arm Thumb instruction set and is software and tool compatible with other Kinetis L series devices.
The principal features include a 48 MHz operating frequency, 8 KB Flash, 1 KB SRAM, and a 12-channel 12-bit analog-to-digital converter. The 24-QFN package supports compact PCB layouts, while the exposed-pad construction assists heat transfer from the device. Industrial-grade sourcing information identifies the part with a no-lead square package and 24 terminals.
The MKL05Z8VFK4 is suitable for industrial control, compact sensor nodes, portable measurement equipment, low-power monitoring systems, and basic embedded-control products. Its small memory footprint favors lightweight firmware that performs acquisition, state-machine control, communications, and local actuation without requiring a high-end processor. The ADC enables analog sensor interfaces without a separate converter on systems that have available I/O and design constraints.
When laying out the circuit, use the manufacturer's pin-description table to assign every 24-QFN terminal and preserve the exposed-pad connection specified by the datasheet. Place decoupling capacitors close to the supply terminals and route sensitive analog inputs away from switching nodes. Confirm the startup, clock, and reset configuration in the manufacturer datasheet before committing the firmware and board layout.
This page combines manufacturer lifecycle information, distributor technical summaries, package details, application guidance, and a constrained drop-in comparison for engineers evaluating the MKL05Z8VFK4. Because no explicit quantity-break price was shown, current commercial terms, stock status, and lead time should be requested through the Request a Quote form on this page.
直接替換替代品,適用於 MKL05Z8VFK4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MKL05Z8VFK4 (相同外形與佔位) — 差異在於 Package, Mounting Type, RAM Size, Series.
MKL03Z8VFK4
✅ 直接替換聯絡詢價
查看資料表 →ATSAMD10D13A-MUT
✅ 直接替換聯絡詢價
查看資料表 →MKL05Z8VFK4 最大額定值與電氣特性
| Product Type | 32-bit microcontroller |
| Product Series | Kinetis KL0 |
| Processor Core | Arm Cortex-M0+ |
| 最大時脈頻率 | 48 MHz |
| Architecture | 32-bit RISC |
| Flash Memory | 8 KB (8K x 8) |
| SRAM | 1 KB |
| ADC Resolution | 12-bit |
| ADC Channel Count | 12 channels |
| Operating Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| 封裝 | 24-QFN (4 mm x 4 mm) |
| Terminal Count | 24 terminals |
| 安裝類型 | No-lead surface mount |
| Package Shape | Square |
| Temperature Grade | Industrial |
| Core Count | Single core |
| Power Class | Ultra-low-power |
| 生命週期狀態 | Active |
MKL05Z8VFK4 square 腳位配置指南
MKL05Z8VFK4(square 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: MKL05Z8VFK4.
請參閱 資料表 以查看完整腳位配置。
典型應用
MKL05Z8VFK4 適用於 6 應用s: Compact Industrial Sensor Node, Battery-Powered Monitoring Device, Portable Measurement Instrument, Basic Motor and Actuator Controller, Embedded Data Logger, Smart IoT Peripheral.
Compact Industrial Sensor Node
The MKL05Z8VFK4 fits compact industrial sensor nodes that acquire several analog channels and perform local filtering, thresholding, or state-machine control. Its 48 MHz Arm Cortex-M0+ core provides useful processing headroom, while 8 KB of Flash supports a compact firmware image and 1 KB of SRAM accommodates short acquisition and control buffers. The 12-channel, 12-bit ADC allows multiple sensor inputs to be consolidated in a small 24-QFN footprint. Design the analog routing away from switching circuitry, use short sensor traces, and follow the manufacturer grounding and decoupling guidance to preserve measurement quality in industrial environments.
推薦
Battery-Powered Monitoring Device
The MKL05Z8VFK4 is appropriate for battery-powered monitoring equipment where processing capability must coexist with low system power. Its ultra-low-power Kinetis KL0 architecture operates at 1.8 V, 2.5 V, or 3.3 V, enabling the design to match the available energy source and reduce voltage-conversion overhead. The 48 MHz Cortex-M0+ core can handle scheduled sampling and local logic, while the 12-bit ADC supports analog sensing without a separate converter. Firmware should use the manufacturer-defined low-power modes, disable unused peripherals, and schedule conversions to minimize average energy consumption.
推薦
Portable Measurement Instrument
The MKL05Z8VFK4 can serve as the control core of a portable measurement instrument requiring mixed analog acquisition and deterministic embedded logic. Its 12-channel, 12-bit ADC supports multiple transducer inputs, and the 48 MHz Cortex-M0+ processor can support calibration logic, display updates, configuration handling, and data acquisition sequencing. The compact 4 mm by 4 mm 24-QFN package preserves board area for a sensor front end, signal conditioning, and communications. Use separate analog and digital return paths, place bypass capacitors close to the supply pins, and validate the ADC configuration against the selected operating voltage.
推薦
Basic Motor and Actuator Controller
The MKL05Z8VFK4 is suitable for basic actuator-control boards where a microcontroller handles digital commands, sensor feedback, and low-duty-cycle sequencing. The 48 MHz Arm Cortex-M0+ core provides enough performance for deterministic control logic, and the 1 KB of SRAM is sufficient for compact state management when complex buffering is unnecessary. The 24-QFN package reduces PCB footprint in space-constrained controllers. Design the power stage separately from the MCU supply, keep switching-current paths away from analog inputs, and include appropriate protection and shutdown behavior around the actuator drive stage.
推薦
Embedded Data Logger
The MKL05Z8VFK4 fits small embedded data loggers that periodically acquire analog information and store or transmit compact records. Its 8 KB of Flash holds firmware and fixed parameters, while 1 KB of SRAM can support short working buffers; designs requiring large continuous logs should add external memory or choose a higher-capacity MCU. The 12-channel ADC supports multiple physical inputs without demanding a separate converter, and the 48 MHz core can manage timestamps, filtering, and communications tasks. Use scheduled acquisition, avoid continuous polling where possible, and confirm write endurance for any frequently updated nonvolatile records.
推薦
Smart IoT Peripheral
The MKL05Z8VFK4 can act as the local controller in a smart IoT peripheral that combines sensing, a simple user interface, and a communications interface. Its 48 MHz Cortex-M0+ core handles protocol housekeeping and application logic, while the 12-bit ADC supports environmental or physical measurements. Supply-voltage options from 1.8 V through 3.3 V enable integration with compact system rails. The 24-QFN package is useful where board area is constrained, although the 8 KB Flash and 1 KB SRAM require disciplined firmware sizing. Confirm peripheral pin multiplexing and radio-module interface requirements before schematic capture.
推薦
工程參考資料,適用於 MKL05Z8VFK4 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MKL03Z8VFK4 | ATSAMD10D13A-MUT |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | Microchip Technology |
| Package | 24-QFN (4 mm x 4 mm) | 24-QFN (4 mm x 4 mm) | 24-QFN (4 mm x 4 mm) |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
主要差異化特點
- Higher operating frequency than the identified cross-brand comparison candidate (對比ATSAMD10D13A-MUT)
- NXP Kinetis L-series software ecosystem (對比ATSAMD10D13A-MUT)
- Compact 4 mm by 4 mm footprint with integrated conversion (對比ATSAMD10D13A-MUT)
設計說明
Use the NXP datasheet land pattern for the 24-QFN package and place the required bypass capacitors immediately adjacent to the supply and ground terminals. Preserve all exposed-pad connections shown in the package drawing. The 4 mm by 4 mm footprint saves board area, but incorrect pad dimensions or thermal-via placement can prevent acceptable assembly yield and increase junction temperature under sustained processing load.
Route analog sensor inputs away from clock, switching, and high-current return paths. Use a quiet ground path for the ADC reference and analog circuitry, and terminate unused inputs according to the manufacturer guidance. Because the MCU combines sensitive analog conversion with digital control in one compact package, disciplined partitioning on the PCB can materially improve measurement repeatability without adding external components.
Do not infer pin compatibility from the shared 24-QFN outline alone. Before substituting MKL03Z8VFK4 or ATSAMD10D13A-MUT, compare every power pin, ground terminal, reset function, boot input, analog input, and peripheral multiplexing assignment. Also check maximum clock, memory capacity, ADC channels, voltage limits, and exposed-pad requirements; a same-sized package can still require board changes.
Choose the system supply from the manufacturer-supported 1.8 V, 2.5 V, or 3.3 V options and verify that the selected clock and ADC operating modes are valid at that voltage. Low-power operation depends on using the documented clock, peripheral, and sleep-mode configuration rather than simply reducing the firmware workload. Validate startup sequencing and current consumption with the intended sensor load and communication activity.
合規資訊
The manufacturer product page identifies the MKL05Z8VFK4 as active, but the available product summaries do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.