MKL36Z64VLL4 - 48MHz Cortex-M0+ 64KB MCU | NXP | LQFP-100
MPN: MKL36Z64VLL4 ✓ 啟用中MKL36Z64VLL4 概覽
直接替換替代品,適用於 MKL36Z64VLL4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
MKL36Z64VLH4
✅ 直接替換📋 參考替代品(不在目錄中)
MKL36Z128VLL4
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MKL36Z32VLL4
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MKL36Z16VLL4
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MKL36Z4VLL4
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MKL36Z64VLL4 最大額定值與電氣特性
| Product Type | 32-bit low-power microcontroller (MCU) |
| Manufacturer | NXP Semiconductors |
| Series | Kinetis KL3 |
| Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz |
| CPU Word Width | 32 bit |
| Flash Memory | 64 KB (64K x 8) |
| SRAM | 8 KB |
| Operating Voltage Options | 1.8 V, 2.5 V, and 3.3 V |
| 封裝 | 100-LQFP, 14 x 14 mm |
| 安裝類型 | Surface mount |
| Display Controller | Segment LCD controller |
| Timer Resolution | 16 bit |
| Low-Power Operation | Multiple flexible low-power modes |
| Family Compatibility | Compatible with Kinetis L families and Kinetis K3x family |
| Development Device Pack | MKL36Z4 CMSIS Pack |
| 生命週期狀態 | Active |
MKL36Z64VLL4 100-lqfp, 14 x 14 mm 腳位配置指南
MKL36Z64VLL4(100-lqfp, 14 x 14 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: MKL36Z64VLL4.
請參閱 資料表 以查看完整腳位配置。
典型應用
MKL36Z64VLL4 適用於 6 應用s: Electronic Utility Metering, Water and Gas Meter Controls, Industrial Instrument Panels, Battery-Powered Sensor Nodes, Standalone Data Acquisition Module, HVAC and Environmental Control.
Electronic Utility Metering
The MKL36Z64VLL4 fits electronic utility meters that combine local measurement, a segment LCD, and low-power operation. Its 48 MHz Arm Cortex-M0+ core provides responsive control processing, while 64 KB of flash offers room for calibration tables, communication routines, event logs, and meter firmware. The segment LCD controller simplifies the display of consumption readings without requiring a separate display driver. Multiple low-power modes help reduce energy use between measurement cycles, while the 1.8 V, 2.5 V, and 3.3 V operating options support sensor, communication, and memory rails within the same meter design.
推薦
Water and Gas Meter Controls
The MKL36Z64VLL4 is well suited to water and gas meter controllers because it combines 64 KB of flash, 8 KB of SRAM, analog and timing resources, and a segment LCD controller in one package. Firmware can supervise pulse or analog sensing, apply calibration and compensation, maintain a running total, and drive a local display. The 48 MHz Cortex-M0+ core also supports protocol handling and event management. Low-power operating modes are valuable in remote or battery-assisted installations, while the 100-pin LQFP provides dedicated mixed-signal and user-interface connections.
推薦
Industrial Instrument Panels
The MKL36Z64VLL4 can serve as the controller for an industrial instrument panel with a segment display, sensors, and external switching outputs. Its 48 MHz Cortex-M0+ core processes measurements and user inputs, while the segment LCD controller drives numeric and status displays directly. The 100-LQFP package exposes a generous GPIO count for keys, indicators, relays, and communications. Support for 1.8 V, 2.5 V, and 3.3 V operation allows the MCU to interface with different peripheral voltage domains, and low-power modes help reduce standby demand in panel systems that remain connected to an instrument bus.
推薦
Battery-Powered Sensor Nodes
The MKL36Z64VLL4 is appropriate for battery-powered sensor nodes that periodically wake, acquire data, and return to a low-power state. The Arm Cortex-M0+ core provides efficient 32-bit processing at 48 MHz, while the family's multiple low-power modes support duty-cycled measurement designs. Sixty-four kilobytes of flash can hold firmware, calibration coefficients, and buffered records without requiring a large external memory device. The three listed operating-voltage options also help designers select compatible radio, sensor, and flash components for a consolidated low-energy board.
推薦
Standalone Data Acquisition Module
The MKL36Z64VLL4 works well in a standalone acquisition module that combines sensor conditioning, local display, and serial data transfer. Its 64 KB flash and 8 KB SRAM provide sufficient space for control firmware and short-term buffering, while the 48 MHz core provides headroom for filtering and conditioning tasks. The segment LCD controller allows local reading of measurements without adding a separate display controller. Multiple GPIO and mixed-signal pins support sensor inputs, status indicators, and communications, making the device suitable for compact industrial monitoring nodes.
推薦
HVAC and Environmental Control
The MKL36Z64VLL4 can control environmental monitoring and HVAC interface boards that use local displays and multiple sensors. The Cortex-M0+ core executes control logic, timers, and communications while the segment LCD controller presents temperature, humidity, or system status. Sixty-four kilobytes of flash accommodates a complete control application, protocol stack, and calibration data. The 100-pin LQFP provides enough I/O for fan commands, valve drivers, sensors, and communication interfaces, and the family's low-power modes help manage energy use when the controlled system is idle.
推薦
推薦產品摘要
工程參考資料,適用於 MKL36Z64VLL4 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MKL36Z64VLH4 | MKL36Z128VLL4 | MKL36Z32VLL4 | MKL36Z16VLL4 | MKL36Z4VLL4 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 100-LQFP (14x14) | 100-LQFP (14x14) | 100-LQFP (14x14) | 100-LQFP (14x14) | 100-LQFP (14x14) | 100-LQFP (14x14) |
| Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 64 KB | 64 KB | 128 KB | 32 KB | 16 KB | 4 KB |
| Display Controller | Segment LCD controller | Segment LCD controller | Segment LCD controller | Segment LCD controller | Segment LCD controller | Segment LCD controller |
| Low-Power Modes | Multiple flexible low-power modes | Multiple flexible low-power modes | Multiple flexible low-power modes | Multiple flexible low-power modes | Multiple flexible low-power modes | Multiple flexible low-power modes |
主要差異化特點
- Dedicated segment LCD control in a 100-pin general-purpose MCU (對比MKL36Z32VLL4)
- Higher flash headroom than lower-density family members (對比MKL36Z16VLL4)
- Identical memory configuration to the closest identified NXP alternative (對比MKL36Z64VLH4)
- Balanced 64 KB flash configuration for metrology products (對比MKL36Z4VLL4)
設計說明
Decouple each supported supply rail close to its package pins, and route analog and digital returns to the ground-plane structure recommended in the NXP datasheet. The 1.8 V, 2.5 V, and 3.3 V options describe device operating capabilities rather than permission to mix logic voltages on every GPIO. Confirm the absolute-maximum and pin-level voltage limits before connecting external sensors, LCD drive circuitry, or programming-interface signals.
Place the MCU's decoupling capacitors adjacent to the corresponding power pins and keep the LCD segment and common-drive traces away from high-current switching nodes and clock sources. Use the 100-LQFP land pattern from the NXP package drawing and verify pin-1 orientation against the PCB silkscreen. For metering designs, isolate analog sensor routing from display and communication returns to reduce conversion errors and noise coupling.
Do not treat a same-package MCU as interchangeable without checking the complete ordering code, flash capacity, temperature range, and peripheral map. MKL36 variants can share the 100-LQFP footprint while providing different flash sizes, and firmware built for the 64 KB device may exceed the capacity of a 16 KB or 4 KB member. Rebuild and validate the image after every memory-configuration change.
Measure current in each relevant operating mode rather than designing only from a typical active-state figure. Current demand changes with CPU activity, flash execution, LCD segment count, GPIO loading, and the selected low-power mode. Disable unused peripherals and configure unused pins appropriately, then confirm system-level standby behavior against the battery budget. External sensors and radio circuits often dominate total consumption in a metering node.
合規資訊
NXP lists the MKL36Z64VLL4 as active. Compliance declarations require confirmation against the current manufacturer product page or the declarations associated with the exact ordering code.