NXP Semiconductors

MKL36Z64VLL4 - 48MHz Cortex-M0+ 64KB MCU | NXP | LQFP-100

부품 번호: MKL36Z64VLL4 ✓ 활성
1.8 V, 2.5 V, and 3.3 V Vdss 100-LQFP, 14 x 14 mm Package 48 MHz Speed 64 KB (64K x 8) Memory
MOQ: 1 |

MKL36Z64VLL4 개요

The NXP MKL36Z64VLL4 is a 48 MHz Kinetis KL3-series 32-bit microcontroller based on the Arm Cortex-M0+ core, with 64 KB of embedded flash memory and 8 KB of SRAM in a 100-pin LQFP package measuring 14 x 14 mm. It is designed for low-power metering and control products that need a segment LCD controller, flexible serial connectivity, and an efficient 32-bit processing core. The device supports 1.8 V, 2.5 V, and 3.3 V operation, allowing integration into both low-voltage sensor nodes and conventional 3.3 V industrial equipment. Its Kinetis architecture combines efficient computation with low-power operating modes, analog resources, timing blocks, and communication peripherals. The 100-LQFP package exposes a broad set of GPIO and mixed-signal functions for user interfaces, sensing, and external control. The MKL36Z64VLL4 is suitable for electronic utility meters, water and gas meters, industrial panels, battery-powered instruments, and other embedded systems where display drive, low standby consumption, and deterministic control are important. Firmware development uses the Arm Cortex-M0+ instruction set and the MKL36Z4 device family pack in supported embedded toolchains. This page combines device specifications, practical design considerations, and drop-in replacement information for engineers evaluating the MKL36Z64VLL4.

드롭인 대체품: MKL36Z64VLL4 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

MKL36Z64VLH4

✅ 드롭인
📦 100-LQFP (14x14)
Same 100-LQFP Kinetis KL36 platform with 48 MHz core, 64 KB flash, and 8 KB SRAM; ordering suffix differs

📋 참조 대체품 (카탈로그에 없음)

MKL36Z128VLL4

✅ 드롭인 ⚠️ 사양 미검증
📦 100-LQFP (14x14)
Same 100-LQFP KL36 platform and 48 MHz core, but flash increases from 64 KB to 128 KB (+100%)

📋 참조 대체품 (카탈로그에 없음)

MKL36Z32VLL4

✅ 드롭인 ⚠️ 사양 미검증
📦 100-LQFP (14x14)
Same 100-LQFP KL36 platform and 48 MHz core, but flash decreases from 64 KB to 32 KB (-50%)

📋 참조 대체품 (카탈로그에 없음)

MKL36Z16VLL4

✅ 드롭인 ⚠️ 사양 미검증
📦 100-LQFP (14x14)
Same 100-LQFP KL36 platform and 48 MHz core, but flash decreases from 64 KB to 16 KB (-75%)

📋 참조 대체품 (카탈로그에 없음)

MKL36Z4VLL4

✅ 드롭인 ⚠️ 사양 미검증
📦 100-LQFP (14x14)
Same 100-LQFP KL36 platform and 48 MHz core, but flash decreases from 64 KB to 4 KB (-93.75%)

📋 참조 대체품 (카탈로그에 없음)

MKL36Z64VLL4 최대 정격 & 전기적 특성

Product Type 32-bit low-power microcontroller (MCU)
Manufacturer NXP Semiconductors
Series Kinetis KL3
Core Arm Cortex-M0+
Maximum CPU Frequency 48 MHz
CPU Word Width 32 bit
Flash Memory 64 KB (64K x 8)
SRAM 8 KB
Operating Voltage Options 1.8 V, 2.5 V, and 3.3 V
패키지 100-LQFP, 14 x 14 mm
실장 유형 Surface mount
Display Controller Segment LCD controller
Timer Resolution 16 bit
Low-Power Operation Multiple flexible low-power modes
Family Compatibility Compatible with Kinetis L families and Kinetis K3x family
Development Device Pack MKL36Z4 CMSIS Pack
수명 주기 상태 Active

MKL36Z64VLL4 100-lqfp, 14 x 14 mm 핀 구성 가이드

MKL36Z64VLL4(100-lqfp, 14 x 14 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

MKL36Z64VLL4의 100-lqfp, 14 x 14 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MKL36Z64VLL4.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MKL36Z64VLL4 적합 용도: 6 애플리케이션s: Electronic Utility Metering, Water and Gas Meter Controls, Industrial Instrument Panels, Battery-Powered Sensor Nodes, Standalone Data Acquisition Module, HVAC and Environmental Control.

🏭

Electronic Utility Metering

The MKL36Z64VLL4 fits electronic utility meters that combine local measurement, a segment LCD, and low-power operation. Its 48 MHz Arm Cortex-M0+ core provides responsive control processing, while 64 KB of flash offers room for calibration tables, communication routines, event logs, and meter firmware. The segment LCD controller simplifies the display of consumption readings without requiring a separate display driver. Multiple low-power modes help reduce energy use between measurement cycles, while the 1.8 V, 2.5 V, and 3.3 V operating options support sensor, communication, and memory rails within the same meter design.

🔧

Water and Gas Meter Controls

The MKL36Z64VLL4 is well suited to water and gas meter controllers because it combines 64 KB of flash, 8 KB of SRAM, analog and timing resources, and a segment LCD controller in one package. Firmware can supervise pulse or analog sensing, apply calibration and compensation, maintain a running total, and drive a local display. The 48 MHz Cortex-M0+ core also supports protocol handling and event management. Low-power operating modes are valuable in remote or battery-assisted installations, while the 100-pin LQFP provides dedicated mixed-signal and user-interface connections.

📺

Industrial Instrument Panels

The MKL36Z64VLL4 can serve as the controller for an industrial instrument panel with a segment display, sensors, and external switching outputs. Its 48 MHz Cortex-M0+ core processes measurements and user inputs, while the segment LCD controller drives numeric and status displays directly. The 100-LQFP package exposes a generous GPIO count for keys, indicators, relays, and communications. Support for 1.8 V, 2.5 V, and 3.3 V operation allows the MCU to interface with different peripheral voltage domains, and low-power modes help reduce standby demand in panel systems that remain connected to an instrument bus.

🧩

Battery-Powered Sensor Nodes

The MKL36Z64VLL4 is appropriate for battery-powered sensor nodes that periodically wake, acquire data, and return to a low-power state. The Arm Cortex-M0+ core provides efficient 32-bit processing at 48 MHz, while the family's multiple low-power modes support duty-cycled measurement designs. Sixty-four kilobytes of flash can hold firmware, calibration coefficients, and buffered records without requiring a large external memory device. The three listed operating-voltage options also help designers select compatible radio, sensor, and flash components for a consolidated low-energy board.

📡

Standalone Data Acquisition Module

The MKL36Z64VLL4 works well in a standalone acquisition module that combines sensor conditioning, local display, and serial data transfer. Its 64 KB flash and 8 KB SRAM provide sufficient space for control firmware and short-term buffering, while the 48 MHz core provides headroom for filtering and conditioning tasks. The segment LCD controller allows local reading of measurements without adding a separate display controller. Multiple GPIO and mixed-signal pins support sensor inputs, status indicators, and communications, making the device suitable for compact industrial monitoring nodes.

🏠

HVAC and Environmental Control

The MKL36Z64VLL4 can control environmental monitoring and HVAC interface boards that use local displays and multiple sensors. The Cortex-M0+ core executes control logic, timers, and communications while the segment LCD controller presents temperature, humidity, or system status. Sixty-four kilobytes of flash accommodates a complete control application, protocol stack, and calibration data. The 100-pin LQFP provides enough I/O for fan commands, valve drivers, sensors, and communication interfaces, and the family's low-power modes help manage energy use when the controlled system is idle.

추천 제품 요약

MKL36Z64VLH4 Same Kinetis KL36 platform and memory configuration 사용처: Electronic Utility Metering, Water and Gas Meter Controls, Industrial Instrument Panels, Standalone Data Acquisition Module, HVAC and Environmental Control MKL36Z128VLL4 Higher-flash family option for expanded meter firmware 사용처: Electronic Utility Metering, Industrial Instrument Panels, Standalone Data Acquisition Module, HVAC and Environmental Control MKL36Z32VLL4 Lower-flash family option for size-limited firmware 사용처: Water and Gas Meter Controls, Battery-Powered Sensor Nodes MKL36Z16VLL4 Reduced-memory option for minimal sensor-node firmware 사용처: Battery-Powered Sensor Nodes
What is the NXP MKL36Z64VLL4?
The NXP MKL36Z64VLL4 is a 48 MHz, 32-bit Kinetis KL3 microcontroller built around the Arm Cortex-M0+ core. It provides 64 KB of embedded flash, 8 KB of SRAM, a segment LCD controller, and mixed-signal control resources in a 100-pin LQFP package. According to the NXP Kinetis KL36 sub-family datasheet, the family targets low-power metering and control applications and includes flexible low-power operating modes.
What are the key specifications of MKL36Z64VLL4 that engineers should know?
The MKL36Z64VLL4 combines a 48 MHz Arm Cortex-M0+ core with 64 KB of flash and 8 KB of SRAM. Its 100-LQFP package measures 14 x 14 mm and supports 1.8 V, 2.5 V, or 3.3 V operation. The device also includes a segment LCD controller, 16-bit timer resources, and multiple low-power modes. These features align it with metering, instrument-panel, and low-power embedded control designs.
Where can I download the MKL36Z64VLL4 datasheet PDF?
The MKL36Z64VLL4 datasheet PDF is available through the NXP product page and the Kinetis KL36 sub-family document linked on this page. The document covers the 48 MHz Cortex-M0+ core, 64 KB flash, 8 KB SRAM, LCD drive capability, power modes, clocking, peripherals, and the 100-LQFP pin arrangement. Use the pin-description tables and electrical-characteristics tables when assigning PCB tracks and designing the power network.
Where can I find the MKL36Z64VLL4 pinout?
The MKL36Z64VLL4 pinout is documented in the NXP Kinetis KL36 sub-family datasheet under the 100-LQFP package information. It includes the 100 numbered terminals, power pins, ground pins, port functions, analog inputs, LCD connections, and debug interfaces. When assigning signals in the PCB layout, cross-check every pin against the specific package drawing and peripheral multiplexing table in the manufacturer document.
What is the difference between MKL36Z64VLL4 and MKL36Z64VLH4?
MKL36Z64VLH4 is the closest NXP family alternative located for the same 100-LQFP platform, while MKL36Z64VLL4 is the ordered device. Both belong to the MKL36Z4 family with a Cortex-M0+ core, 48 MHz operation, 64 KB flash, and 8 KB SRAM. Confirm the ordering-temperature suffix, exposed-pin requirements, and PCB footprint against the NXP datasheet before treating either part as a direct substitution.
Is MKL36Z64VLL4 suitable for low-power metering devices?
Yes, the MKL36Z64VLL4 is suitable for low-power metering devices because it combines a 48 MHz Cortex-M0+ core, 64 KB of flash, 8 KB of SRAM, a segment LCD controller, and multiple low-power modes. These resources support display-driven utility meters, gas meters, water meters, and compact industrial instruments where standby power, measurement peripherals, and a readable local display are central requirements.
What is the best drop-in replacement for MKL36Z64VLL4?
The closest identified drop-in candidate is the NXP MKL36Z64VLH4 because it uses the same 100-LQFP Kinetis KL36 platform and retains the 48 MHz core, 64 KB flash, and 8 KB SRAM configuration. Before replacing the fitted device, verify temperature range, pin multiplexing, and exact ordering information in the NXP documentation. MKL36 variants with different flash sizes are not drop-in choices when firmware storage requirements are unchanged.
Can MKL36Z64VLH4 replace MKL36Z64VLL4 on an existing PCB?
MKL36Z64VLH4 can be considered for an existing MKL36Z64VLL4 PCB because both use the 100-LQFP Kinetis KL36 footprint and provide the same core and memory configuration. Pin compatibility still requires confirmation of package drawing, temperature grade, and board-level requirements. Confirm the exact NXP ordering information before committing to the substitution for production builds.
When should I choose MKL36Z64VLL4 over a lower-memory Kinetis MCU?
Choose the MKL36Z64VLL4 when application firmware, display data, communication buffers, or future field updates require more flash headroom than a smaller-memory device provides. Its 64 KB flash and 8 KB SRAM reduce the risk of memory pressure compared with a 32 KB or 16 KB variant. For small control loops, choose the lower-memory member only after measuring actual code size, stack demand, and application upgrade requirements.
What development tools support the MKL36Z64VLL4?
The MKL36Z64VLL4 is supported by the MKL36Z4 CMSIS Pack, which provides device definitions for Arm Cortex-M0+ development environments. The Keil device listing identifies a Cortex-M0+ core, 48 MHz family, and MKL36Z4 CMSIS Pack. Build configuration must also match the intended NXP device, flash programming method, debug interface, and low-power peripherals used by the application.
Does MKL36Z64VLL4 have a segment LCD controller?
Yes, the MKL36Z64VLL4 includes a segment LCD controller for driving character and numeric display segments. The NXP product documentation identifies the segment LCD option as a defining feature of the Kinetis KL3x family. Use the LCD pin-muxing, bias, drive-level, and reference-voltage sections of the manufacturer datasheet when assigning segment and common-drive connections to the PCB.
How much power does the MKL36Z64VLL4 consume?
The MKL36Z64VLL4 uses multiple low-power modes to reduce consumption, but a single current figure cannot represent active processing, peripheral operation, I/O loading, and standby behavior. Use the NXP datasheet current-consumption tables for the selected voltage, temperature, clock configuration, and operating mode. Actual board demand also depends on LCD drive levels, sensor loads, and the state of external circuitry.
Is MKL36Z64VLL4 in stock and what is its lead time?
The MKL36Z64VLL4 is listed as active by NXP, and current stock conditions can change quickly across authorized channels. Use the Request a Quote form on this page to request present availability, lot traceability, and a lead-time quotation for the exact 100-LQFP ordering code. The manufacturer lists the device as active, so it remains suitable for new industrial and metering designs.
Where can I buy MKL36Z64VLL4 at a competitive price?
Submit the MKL36Z64VLL4 inquiry through the Request a Quote form on this page for a current quotation and available volume breaks. The form identifies the exact NXP ordering code, which helps prevent confusion with flash-size or temperature-range variants. Pricing and stock are confirmed at quotation time because device-market availability and allocation can change without notice.
What is the price of MKL36Z64VLL4?
A current price for the MKL36Z64VLL4 is best requested through the Request a Quote form on this page. The form can return quantity pricing, current inventory, expected lead time, and shipment options for the exact 100-LQFP device. Requesting a quotation also helps distinguish the target ordering code from related Kinetis KL36 members with different memory sizes or temperature suffixes.
What is the MKL36Z64VLL4 equivalent for a different manufacturer?
No verified cross-manufacturer drop-in equivalent was identified for the MKL36Z64VLL4. The device combines a specific 100-LQFP pin arrangement, segment LCD resources, Kinetis peripheral architecture, Arm Cortex-M0+ core, and 64 KB flash configuration. A different manufacturer's MCU may offer similar computation but can require PCB and firmware changes. Compare the complete pin, clock, memory, LCD, and peripheral maps before selecting a substitute.

엔지니어링 참조 데이터: MKL36Z64VLL4 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the MKL36Z64VLL4 when a low-power metering or industrial-control design needs a 48 MHz Arm Cortex-M0+ core, 64 KB of flash, 8 KB of SRAM, and direct segment LCD drive in a 100-LQFP package. Select MKL36Z64VLH4 when procurement continuity or an alternate ordering code is required after confirming the temperature and package details. Choose MKL36Z128VLL4 when firmware growth, protocol stacks, or data buffering require more flash. Choose the 32 KB, 16 KB, or 4 KB members only when the final linked image, stack budget, and upgrade plan fit comfortably within the reduced memory. No cross-manufacturer drop-in candidate was confirmed, so a different supplier's MCU should be selected only after its complete pin, peripheral, clock, toolchain, and software-support mapping has been validated.

대체품과의 비교

파라미터 이 제품 MKL36Z64VLH4 MKL36Z128VLL4 MKL36Z32VLL4 MKL36Z16VLL4 MKL36Z4VLL4
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 100-LQFP (14x14) 100-LQFP (14x14) 100-LQFP (14x14) 100-LQFP (14x14) 100-LQFP (14x14) 100-LQFP (14x14)
Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz
Flash Memory 64 KB 64 KB 128 KB 32 KB 16 KB 4 KB
Display Controller Segment LCD controller Segment LCD controller Segment LCD controller Segment LCD controller Segment LCD controller Segment LCD controller
Low-Power Modes Multiple flexible low-power modes Multiple flexible low-power modes Multiple flexible low-power modes Multiple flexible low-power modes Multiple flexible low-power modes Multiple flexible low-power modes

주요 차별점

  • Dedicated segment LCD control in a 100-pin general-purpose MCU (vs MKL36Z32VLL4)
  • Higher flash headroom than lower-density family members (vs MKL36Z16VLL4)
  • Identical memory configuration to the closest identified NXP alternative (vs MKL36Z64VLH4)
  • Balanced 64 KB flash configuration for metrology products (vs MKL36Z4VLL4)

설계 노트

Decouple each supported supply rail close to its package pins, and route analog and digital returns to the ground-plane structure recommended in the NXP datasheet. The 1.8 V, 2.5 V, and 3.3 V options describe device operating capabilities rather than permission to mix logic voltages on every GPIO. Confirm the absolute-maximum and pin-level voltage limits before connecting external sensors, LCD drive circuitry, or programming-interface signals.

Place the MCU's decoupling capacitors adjacent to the corresponding power pins and keep the LCD segment and common-drive traces away from high-current switching nodes and clock sources. Use the 100-LQFP land pattern from the NXP package drawing and verify pin-1 orientation against the PCB silkscreen. For metering designs, isolate analog sensor routing from display and communication returns to reduce conversion errors and noise coupling.

Do not treat a same-package MCU as interchangeable without checking the complete ordering code, flash capacity, temperature range, and peripheral map. MKL36 variants can share the 100-LQFP footprint while providing different flash sizes, and firmware built for the 64 KB device may exceed the capacity of a 16 KB or 4 KB member. Rebuild and validate the image after every memory-configuration change.

Measure current in each relevant operating mode rather than designing only from a typical active-state figure. Current demand changes with CPU activity, flash execution, LCD segment count, GPIO loading, and the selected low-power mode. Disable unused peripherals and configure unused pins appropriately, then confirm system-level standby behavior against the battery budget. External sensors and radio circuits often dominate total consumption in a metering node.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

NXP lists the MKL36Z64VLL4 as active. Compliance declarations require confirmation against the current manufacturer product page or the declarations associated with the exact ordering code.

데이터 검증일: 2026-11-14 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

MKL36Z64VLL4 datasheet MKL36Z64VLL4 datasheet pdf MKL36Z64VLL4 pinout MKL36Z64VLL4 specifications NXP MKL36Z64VLL4 MKL36Z64VLL4 price MKL36Z64VLL4 stock MKL36Z64VLL4 lead time MKL36Z64VLL4 equivalent MKL36Z64VLL4 replacement MKL36Z64VLL4 vs MKL36Z64VLH4 MKL36Z64VLL4 LQFP-100 footprint MKL36Z64VLL4 segment LCD controller MKL36Z64VLL4 low power metering MKL36Z64VLL4 CMSIS pack

관련 부품 & 용어

NXP Semiconductors MKL36Z64VLL4 MKL36Z64VLH4 MKL36Z128VLL4 MKL36Z32VLL4 MKL36Z16VLL4 MKL36Z4VLL4 Arm Cortex-M0+ Kinetis KL3 Kinetis L family microcontroller MCU 32-bit microcontroller embedded flash memory SRAM segment LCD controller low-power mode 100-LQFP package LQFP-100 surface mount 48 MHz 64 KB flash 8 KB SRAM industrial metering CMSIS Pack
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기