MKL36Z64VLL4 - 48MHz Cortex-M0+ 64KB MCU | NXP | LQFP-100
MPN: MKL36Z64VLL4 ✓ Hoạt độngMKL36Z64VLL4 Tóm tắt
Bộ thay thế dễ dàng lắp đặt cho MKL36Z64VLL4 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
MKL36Z64VLH4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MKL36Z128VLL4
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MKL36Z32VLL4
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MKL36Z16VLL4
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MKL36Z4VLL4
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MKL36Z64VLL4 Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit low-power microcontroller (MCU) |
| Manufacturer | NXP Semiconductors |
| Series | Kinetis KL3 |
| Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz |
| CPU Word Width | 32 bit |
| Flash Memory | 64 KB (64K x 8) |
| SRAM | 8 KB |
| Operating Voltage Options | 1.8 V, 2.5 V, and 3.3 V |
| Hộp | 100-LQFP, 14 x 14 mm |
| Kiểu lắp đặt | Surface mount |
| Display Controller | Segment LCD controller |
| Timer Resolution | 16 bit |
| Low-Power Operation | Multiple flexible low-power modes |
| Family Compatibility | Compatible with Kinetis L families and Kinetis K3x family |
| Development Device Pack | MKL36Z4 CMSIS Pack |
| Trạng thái vòng đời | Active |
Hướng dẫn cấu hình chân MKL36Z64VLL4 100-lqfp, 14 x 14 mm
Cấu hình chân cho MKL36Z64VLL4 (100-lqfp, 14 x 14 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho MKL36Z64VLL4.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MKL36Z64VLL4 phù hợp cho 6 Áp dụngs: Electronic Utility Metering, Water and Gas Meter Controls, Industrial Instrument Panels, Battery-Powered Sensor Nodes, Standalone Data Acquisition Module, HVAC and Environmental Control.
Electronic Utility Metering
The MKL36Z64VLL4 fits electronic utility meters that combine local measurement, a segment LCD, and low-power operation. Its 48 MHz Arm Cortex-M0+ core provides responsive control processing, while 64 KB of flash offers room for calibration tables, communication routines, event logs, and meter firmware. The segment LCD controller simplifies the display of consumption readings without requiring a separate display driver. Multiple low-power modes help reduce energy use between measurement cycles, while the 1.8 V, 2.5 V, and 3.3 V operating options support sensor, communication, and memory rails within the same meter design.
Được đề xuất
Water and Gas Meter Controls
The MKL36Z64VLL4 is well suited to water and gas meter controllers because it combines 64 KB of flash, 8 KB of SRAM, analog and timing resources, and a segment LCD controller in one package. Firmware can supervise pulse or analog sensing, apply calibration and compensation, maintain a running total, and drive a local display. The 48 MHz Cortex-M0+ core also supports protocol handling and event management. Low-power operating modes are valuable in remote or battery-assisted installations, while the 100-pin LQFP provides dedicated mixed-signal and user-interface connections.
Được đề xuất
Industrial Instrument Panels
The MKL36Z64VLL4 can serve as the controller for an industrial instrument panel with a segment display, sensors, and external switching outputs. Its 48 MHz Cortex-M0+ core processes measurements and user inputs, while the segment LCD controller drives numeric and status displays directly. The 100-LQFP package exposes a generous GPIO count for keys, indicators, relays, and communications. Support for 1.8 V, 2.5 V, and 3.3 V operation allows the MCU to interface with different peripheral voltage domains, and low-power modes help reduce standby demand in panel systems that remain connected to an instrument bus.
Được đề xuất
Battery-Powered Sensor Nodes
The MKL36Z64VLL4 is appropriate for battery-powered sensor nodes that periodically wake, acquire data, and return to a low-power state. The Arm Cortex-M0+ core provides efficient 32-bit processing at 48 MHz, while the family's multiple low-power modes support duty-cycled measurement designs. Sixty-four kilobytes of flash can hold firmware, calibration coefficients, and buffered records without requiring a large external memory device. The three listed operating-voltage options also help designers select compatible radio, sensor, and flash components for a consolidated low-energy board.
Được đề xuất
Standalone Data Acquisition Module
The MKL36Z64VLL4 works well in a standalone acquisition module that combines sensor conditioning, local display, and serial data transfer. Its 64 KB flash and 8 KB SRAM provide sufficient space for control firmware and short-term buffering, while the 48 MHz core provides headroom for filtering and conditioning tasks. The segment LCD controller allows local reading of measurements without adding a separate display controller. Multiple GPIO and mixed-signal pins support sensor inputs, status indicators, and communications, making the device suitable for compact industrial monitoring nodes.
Được đề xuất
HVAC and Environmental Control
The MKL36Z64VLL4 can control environmental monitoring and HVAC interface boards that use local displays and multiple sensors. The Cortex-M0+ core executes control logic, timers, and communications while the segment LCD controller presents temperature, humidity, or system status. Sixty-four kilobytes of flash accommodates a complete control application, protocol stack, and calibration data. The 100-pin LQFP provides enough I/O for fan commands, valve drivers, sensors, and communication interfaces, and the family's low-power modes help manage energy use when the controlled system is idle.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MKL36Z64VLL4 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MKL36Z64VLH4 | MKL36Z128VLL4 | MKL36Z32VLL4 | MKL36Z16VLL4 | MKL36Z4VLL4 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 100-LQFP (14x14) | 100-LQFP (14x14) | 100-LQFP (14x14) | 100-LQFP (14x14) | 100-LQFP (14x14) | 100-LQFP (14x14) |
| Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 64 KB | 64 KB | 128 KB | 32 KB | 16 KB | 4 KB |
| Display Controller | Segment LCD controller | Segment LCD controller | Segment LCD controller | Segment LCD controller | Segment LCD controller | Segment LCD controller |
| Low-Power Modes | Multiple flexible low-power modes | Multiple flexible low-power modes | Multiple flexible low-power modes | Multiple flexible low-power modes | Multiple flexible low-power modes | Multiple flexible low-power modes |
Bảo phân biệt quan trọng
- Dedicated segment LCD control in a 100-pin general-purpose MCU (vsMKL36Z32VLL4)
- Higher flash headroom than lower-density family members (vsMKL36Z16VLL4)
- Identical memory configuration to the closest identified NXP alternative (vsMKL36Z64VLH4)
- Balanced 64 KB flash configuration for metrology products (vsMKL36Z4VLL4)
Ghi chú thiết kế
Decouple each supported supply rail close to its package pins, and route analog and digital returns to the ground-plane structure recommended in the NXP datasheet. The 1.8 V, 2.5 V, and 3.3 V options describe device operating capabilities rather than permission to mix logic voltages on every GPIO. Confirm the absolute-maximum and pin-level voltage limits before connecting external sensors, LCD drive circuitry, or programming-interface signals.
Place the MCU's decoupling capacitors adjacent to the corresponding power pins and keep the LCD segment and common-drive traces away from high-current switching nodes and clock sources. Use the 100-LQFP land pattern from the NXP package drawing and verify pin-1 orientation against the PCB silkscreen. For metering designs, isolate analog sensor routing from display and communication returns to reduce conversion errors and noise coupling.
Do not treat a same-package MCU as interchangeable without checking the complete ordering code, flash capacity, temperature range, and peripheral map. MKL36 variants can share the 100-LQFP footprint while providing different flash sizes, and firmware built for the 64 KB device may exceed the capacity of a 16 KB or 4 KB member. Rebuild and validate the image after every memory-configuration change.
Measure current in each relevant operating mode rather than designing only from a typical active-state figure. Current demand changes with CPU activity, flash execution, LCD segment count, GPIO loading, and the selected low-power mode. Disable unused peripherals and configure unused pins appropriately, then confirm system-level standby behavior against the battery budget. External sensors and radio circuits often dominate total consumption in a metering node.
Thông tin tuân thủ
NXP lists the MKL36Z64VLL4 as active. Compliance declarations require confirmation against the current manufacturer product page or the declarations associated with the exact ordering code.