MPC852TZT66A - PowerQUICC 32-Bit MPU, 66MHz, 256-BGA | NXP
MPN： MPC852TZT66A ✗ 停產MPC852TZT66A 概覽
A microprocessor (MPU) is an integrated circuit that combines a central processing unit, memory interfaces, and peripheral controllers on a single die, forming the compute core of an embedded system. Within the broader semiconductor taxonomy, MPUs sit alongside microcontrollers (MCUs) under the broader umbrella of embedded processors, distinguished by higher clock speeds, external memory buses, and richer peripheral sets suitable for systems running complex operating systems or protocol stacks.
Key features of the MPC852TZT66A include an integrated CPM (Communications Processor Module) that offloads communications-intensive processing from the main core, hardware acceleration for common serial protocols, and a 32-bit external memory bus supporting SDRAM, SRAM, and ROM. The 256-PBGA package is RoHS non-compliant per the verified datasheet, indicating lead-containing solder balls that are still in service for legacy industrial programs.
Architecturally, the MPC852T integrates a Power Architecture execution unit with a RISC-style CPM, enabling parallel handling of communications channels without burdening the host CPU. The device exposes a 32-bit data bus, address lines for external memory expansion, and a CPM block supporting HDLC, Ethernet, UART, and other serial protocols through SCCs and SMCs.
Typical applications include WAN interface cards, ISDN terminal adapters, industrial control routers, and legacy telecom line cards. The deterministic CPM performance and mature PowerQUICC toolchain make it a long-life choice for systems that have already been designed around this family.
A key design consideration is the legacy 1.8V core and 3.3V I/O dual-rail requirement, which mandates an efficient sequencing and decoupling strategy. Engineers should also budget for the large 23x23 mm BGA footprint and ensure PCB thermal relief is adequate for sustained CPM workloads.
This page synthesizes distributor pricing, NXP MPC8xx family alternatives, and legacy PowerQUICC design notes not found in the manufacturer datasheet summary.
直接替換替代品，適用於 MPC852TZT66A — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： MPC852TZT66A （相同外形與佔位） — 差異在於 Operating Temperature, RoHS Status, Package, Core Architecture, Process Technology.
MPC852TCZT66A
✅ 直接替換聯絡詢價
查看資料表 →MPC852TVR66A
✅ 直接替換聯絡詢價
查看資料表 →MPC852TZT50A
✅ 直接替換聯絡詢價
查看資料表 →MPC852TZT66A 最大額定值與電氣特性
| Processor Type | MPC8xx PowerQUICC 32-Bit |
| Core Architecture | Power Architecture |
| Maximum Clock Speed | 66 MHz |
| Number of Cores | 1 |
| 資料匯流排寬度 | 32-Bit |
| Core Supply Voltage | 1.8 V |
| I/O Supply Voltage | 3.3 V |
| 封裝 / 外殼 | 256-PBGA (23x23 mm) |
| 安裝類型 | Surface Mount |
| Packaging | Tray |
| 工作溫度 | 0 C to +95 C |
| Communications Module | CPM (HDLC/Ethernet/UART) |
| Lead Free Status | Contains Lead |
| RoHS 狀態 | RoHS Non-Compliant |
| Series | PowerQUICC, MPC852 |
MPC852TZT66A 256-pbga (23x23 mm) 腳位配置指南
MPC852TZT66A（256-pbga (23x23 mm) 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： MPC852TZT66A.
請參閱 資料表 以查看完整腳位配置。
典型應用
MPC852TZT66A 適用於 6 應用s: WAN Interface Cards, ISDN Terminal Adapters, Industrial Control Routers, Legacy Telecom Line Cards, Embedded Protocol Bridges, POS / ATM Network Terminals.
WAN Interface Cards
The MPC852TZT66A's integrated CPM (Communications Processor Module) and 66 MHz Power Architecture core make it a strong fit for WAN interface cards in branch-office routers. The CPM offloads HDLC framing and serial-protocol handling from the host CPU, allowing the card to terminate multiple T1/E1 lines deterministically. Designers place the part on the WAN mezzanine alongside a PHY transceiver; the 32-bit external memory bus connects directly to SDRAM for packet buffering, and the 256-PBGA footprint keeps the card area compact.
推薦
ISDN Terminal Adapters
ISDN terminal adapters benefit from the MPC852TZT66A's hardware-accelerated HDLC channels and dual 3.3V/1.8V power domains. The CPM's SCCs handle BRI/PRI D-channel framing in hardware, leaving the 32-bit core free for call control and management stacks. The 0-95 C operating range fits indoor customer-premises equipment, and the 256-PBGA (23x23) package keeps adapter boards slim enough for desktop enclosures.
推薦
Industrial Control Routers
Industrial control routers use the MPC852TZT66A for deterministic serial-protocol routing between Ethernet, RS-232/RS-485, and legacy fieldbuses. The integrated CPM handles the real-time serial traffic, while the Power Architecture core runs the routing/management firmware. The 66 MHz clock gives enough headroom for small Linux/RTOS stacks, and the 256-PBGA industrial temperature option makes the part suitable for control-cabinet environments.
推薦
Legacy Telecom Line Cards
Legacy telecom line cards remain a core application for the MPC852TZT66A, where long-lived PowerQUICC firmware is already qualified and deployed. The CPM's TDM channels and HDLC controllers map directly to standard telecom backplane interfaces, and the 66 MHz Power Architecture core is sufficient for channelized voice/data aggregation. The 256-BGA (23x23) footprint matches the mechanical envelope of established line-card designs.
推薦
Embedded Protocol Bridges
Embedded protocol bridges that translate between Ethernet and legacy serial protocols benefit from the MPC852TZT66A's mixed CPM peripherals. The 66 MHz core handles routing tables while SCCs and SMCs run the serial-side protocols; the 32-bit external bus interfaces directly to SRAM or SDRAM for frame buffering. The 3.3V I/O domain simplifies interfacing to standard PHY and transceiver chips without level shifters.
推薦
POS / ATM Network Terminals
Point-of-sale and ATM network terminals historically use the MPC852TZT66A for secure transaction routing over PSTN or leased-line networks. The 66 MHz core handles the TCP/IP stack and encryption tasks, while the CPM manages the dial-up modem or leased-line interface. The 256-BGA package and 0-95 C temperature range suit the indoor terminal enclosures, and the dual 1.8V/3.3V rails simplify power-supply design with common LDO regulators.
推薦
工程參考資料，適用於 MPC852TZT66A — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MPC852TCZT66A | MPC852TVR66A | MPC852TZT50A |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 256-PBGA (23x23) | 256-PBGA (23x23) - same | 256-PBGA (23x23) - same | 256-PBGA (23x23) - same |
| Maximum Clock Speed | 66 MHz | 66 MHz | 66 MHz | 50 MHz |
| Core Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| I/O Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Operating Temperature | 0 C to +95 C | 0 C to +95 C | 0 C to +95 C | 0 C to +95 C |
| Communications Module (CPM) | HDLC/Ethernet/UART | HDLC/Ethernet/UART | HDLC/Ethernet/UART | HDLC/Ethernet/UART |
| Data Bus Width | 32-Bit | 32-Bit | 32-Bit | 32-Bit |
| RoHS Status | Non-Compliant (contains lead) | Non-Compliant (contains lead) | Non-Compliant (contains lead) | Non-Compliant (contains lead) |
主要差異化特點
- Same-die drop-in with only a suffix change (對比MPC852TCZT66A)
- Higher clock speed within same BGA footprint (對比MPC852TZT50A)
- Same 256-PBGA footprint across MPC8xx family (對比MPC850DEVR50BU)
設計說明
The MPC852TZT66A requires two independent supplies: a 1.8V rail for the core and a 3.3V rail for I/O. Both rails must be sequenced correctly (core typically powers up before I/O) to avoid latch-up. Use low-dropout regulators with enable inputs tied together, or place a small supervisor IC to enforce power sequencing. Decoupling should include 0.1uF ceramics near every supply pin plus bulk 10uF tantalums on each rail.
The 256-PBGA (23x23 mm) at 1.27 mm pitch demands via-in-pad or dog-bone fanout, plus controlled-impedance routing for the external memory bus. Place 4-layer or 6-layer stack-ups with dedicated ground planes under the BGA to manage SI on the 32-bit bus. Thermal vias beneath the package help dissipate heat during sustained CPM workloads.
Do not assume the MPC852TZT66A is RoHS-compliant: the verified datasheet flags it as containing lead in the BGA solder balls. Designs targeting the EU RoHS directive must use a lead-free ordering code. Also, watch out for static I/O configuration - several MPC852T signals are sampled at reset to set bus width and boot source, and incorrect strapping resistors will leave the part non-functional with no obvious error.
合規資訊
RoHS non-compliant per verified distributor data - BGA solder balls contain lead. AEC-Q100 not applicable (telecom/industrial MPU, not automotive-grade). REACH and conflict-minerals status not provided in the verified web data.