MSP430F6734IPZ - 25MHz Mixed-Signal Metering MCU | Texas Instruments
MPN: MSP430F6734IPZ ✓ 啟用中MSP430F6734IPZ 概覽
A mixed-signal metering SoC is a specialized microcontroller that combines digital control, precision analog measurement, display support, and communication peripherals in one device. In the product hierarchy, the MSP430F6734 belongs to the MSP430 mixed-signal MCU family and integrates energy-metering signal acquisition with an embedded real-time control processor. This integration reduces the component count required for a metering design while supporting measurement and control functions on the same board.
The headline features are a 25 MHz CPU frequency, 96 KB of Flash program memory, 4 KB of RAM, and three sigma-delta analog-to-digital converters. The sigma-delta ADCs are particularly relevant to metering designs because they perform analog signal conversion for measured electrical quantities. The manufacturer identifies the device as a single-phase metering SoC with LCD support and a real-time clock, making it suitable for systems that need local measurement, display handling, timekeeping, and embedded control.
The CPUXV2 architecture uses 16-bit registers and supports efficient mixed-signal firmware execution at 25 MHz. Flash is organized as 96K x 8 bits, while the 4 KB SRAM provides working memory for measurement processing, calibration values, communications buffers, and display handling. Because the device integrates both metering-specific and general-purpose control functions, firmware must carefully budget RAM and avoid unnecessary background processing when low-power behavior is important.
Typical applications include single-phase electricity meters, smart energy meters, industrial energy-monitoring equipment, load-control terminals, and metering boards with local LCD indication. The integrated real-time clock supports time-stamped measurement records, while the LCD capability enables compact meter interfaces without requiring a separate display controller. The three sigma-delta ADC channels also make the device suitable for multi-channel current or voltage acquisition when the selected analog front end supports those measurements.
The primary design consideration is analog signal-chain implementation. Component selection, input filtering, protection, reference stability, and isolation must support the metering accuracy required by the finished instrument. Layout should also keep sensitive analog inputs away from high-current switching paths and digital interface activity. Firmware validation should include startup calibration, measurement accuracy, watchdog behavior, communications recovery, and display timing before deployment in the field.
This page combines verified product parameters, practical metering-application guidance, a drop-in-focused comparison, and design notes that help engineers evaluate the MSP430F6734IPZ beyond a basic distributor specification summary.
直接替換替代品,適用於 MSP430F6734IPZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MSP430F6734IPZ (相同外形與佔位) — 差異在於 CPU Architecture, Flash Memory, Package, Product Type, RAM.
MSP430F6734AIPZ
✅ 直接替換📋 參考替代品(不在目錄中)
MSP430F6736IPZ
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MSP430F6733IPZ
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MSP430F6721IPZ
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MSP430F6720IPZ
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MSP430F6734IPZ 最大額定值與電氣特性
| Product Type | Mixed-signal single-phase metering SoC |
| CPU Architecture | MSP430 CPUXV2, 16-bit |
| Maximum CPU Frequency | 25 MHz |
| Flash Memory | 96 KB (96K x 8 bits) |
| RAM | 4 KB |
| ADC Count | 3 sigma-delta ADCs |
| Supply Voltage Range | 1.8 V to 3.6 V |
| 封裝 | 100-pin LQFP (PZ), 14 x 14 mm |
| 安裝類型 | Surface mount |
| Real-Time Clock | Integrated real-time clock |
| LCD Support | Integrated LCD support |
| RoHS 狀態 | Compliant |
MSP430F6734IPZ 100-pin lqfp (pz), 14 x 14 mm 腳位配置指南
MSP430F6734IPZ(100-pin lqfp (pz), 14 x 14 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: MSP430F6734IPZ.
請參閱 資料表 以查看完整腳位配置。
典型應用
MSP430F6734IPZ 適用於 6 應用s: Single-Phase Smart Electricity Meter, Industrial Energy-Monitoring Controller, Load-Control and Energy-Distribution Terminal, Metering Board with Local LCD Indication, Remote Utility-Sensing Node, Compact Energy-Measurement Instrument.
Single-Phase Smart Electricity Meter
The MSP430F6734IPZ fits a single-phase smart electricity meter because its three sigma-delta ADCs acquire metering signals while the 25 MHz MSP430 CPUXV2 core performs acquisition control, calibration, and energy calculation. Its 96 KB Flash accommodates measurement and communications firmware, while 4 KB of RAM supports working buffers, calibration coefficients, and time records. The integrated real-time clock supports timestamps and time-of-use schedules, and LCD support enables a local segmented-display interface. The design should pair the MCU with an appropriate current and voltage sensing front end, then validate accuracy, startup behavior, and communications recovery across the full supply range of 1.8 V to 3.6 V.
推薦
Industrial Energy-Monitoring Controller
The MSP430F6734IPZ can serve as the measurement and control processor in an industrial energy-monitoring controller. Three sigma-delta ADCs support analog acquisition, the 25 MHz CPU provides enough control bandwidth for sensor sampling and local processing, and the 96 KB Flash footprint is suitable for embedded acquisition and communication software. The 4 KB RAM should be profiled carefully when combining metering buffers, diagnostic data, and protocol handling. Because industrial installations may place the controller near switching power stages, layout should isolate analog inputs, use a stable reference strategy, and provide appropriate surge protection. Firmware should include sensor-health checks, watchdog recovery, and parameterized recalibration routines.
推薦
Load-Control and Energy-Distribution Terminal
The MSP430F6734IPZ is suitable for load-control terminals that measure consumption and operate local relays or communicate consumption data to a broader control system. The three sigma-delta ADC channels can acquire supported electrical quantities, while the real-time clock enables operating schedules and timestamped events. Its LCD support can present status, energy totals, and diagnostic information without a separate display controller. The 4 KB RAM limit requires disciplined buffer allocation, especially when logging or networking. A production design should separate high-current switching paths from sensitive analog traces, define safe-state behavior for relay outputs, and verify control-loop timing against the 25 MHz processor clock.
推薦
Metering Board with Local LCD Indication
The MSP430F6734IPZ supports compact metering boards that combine acquisition, processing, timekeeping, and local display. Its integrated LCD capability reduces the need for a separate display controller, while the three sigma-delta ADCs process metering inputs and the 96 KB Flash stores display, calibration, and diagnostic routines. The real-time clock allows the board to display timestamps or implement time-of-use functions. Engineers should choose display drive timing and segment mapping that satisfy the device requirements, budget the 4 KB RAM carefully, and avoid placing LCD-related switching noise near sensitive measurement nodes. Prototype validation should cover contrast across temperature, update latency, and display behavior during communication or firmware-update operations.
推薦
Remote Utility-Sensing Node
The MSP430F6734IPZ can anchor a remote utility-sensing node that measures electrical quantities and forwards time-stamped results through a low-power communications interface. Its low-power MSP430 architecture, real-time clock, three sigma-delta ADCs, and 96 KB Flash provide a practical combination for embedded sensing and protocol handling. The 4 KB RAM can serve protocol and measurement buffers, provided the firmware uses bounded buffers and avoids unnecessary background activity. For remote deployments, implement secure startup, communications retry, data-integrity checks, and watchdog recovery. The 1.8 V to 3.6 V operating range supports low-voltage system architectures, while the analog front end and protection network remain essential for reliable field measurements.
推薦
Compact Energy-Measurement Instrument
The MSP430F6734IPZ supports compact energy-measurement instruments that need local control, calibrated acquisition, a display, and accurate time records without a separate processor. The 25 MHz CPUXV2 core executes acquisition and calculation routines, while 96 KB Flash provides space for application firmware, tables, and diagnostics. The three sigma-delta ADC channels provide the measurement interface, and the real-time clock supports measurement sessions and event logs. Because the RAM budget is 4 KB, engineers should profile the worst-case stack, buffers, and communication paths together. Production validation should include calibration repeatability, reference stability, input overload recovery, and operation across the full 1.8 V to 3.6 V supply range.
推薦
推薦產品摘要
工程參考資料,適用於 MSP430F6734IPZ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MSP430F6734AIPZ | MSP430F6736IPZ | MSP430F6733IPZ | MSP430F6721IPZ | MSP430F6720IPZ |
|---|---|---|---|---|---|---|
| Package | LQFP-100 (PZ), 14 x 14 mm | LQFP-100 (PZ), 14 x 14 mm | LQFP-100 (PZ), 14 x 14 mm | LQFP-100 (PZ), 14 x 14 mm | LQFP-100 (PZ), 14 x 14 mm | LQFP-100 (PZ), 14 x 14 mm |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| CPU Architecture | 16-bit MSP430 CPUXV2 | 16-bit MSP430 CPUXV2 | 16-bit MSP430 | 16-bit MSP430 | 16-bit MSP430 | 16-bit MSP430 |
主要差異化特點
- Closest revision-level candidate matches the key listed resources (對比MSP430F6734AIPZ)
- Dedicated integration for single-phase metering (對比MSP430F6736IPZ)
- Local metering data presentation and timekeeping are integrated (對比MSP430F6721IPZ)
設計說明
Route sigma-delta ADC inputs as short, guarded traces away from relay contacts, DC-DC converter nodes, LCD drive signals, and clock edges. Use a continuous ground reference beneath the analog section, place input filtering close to the source, and keep return currents from high-current switches out of the analog ground path. Check every net against the manufacturer pin-configuration and layout guidance before releasing the PCB.
Design the regulator for the complete 1.8 V to 3.6 V operating range and for the worst-case load presented by the analog front end, communications, and display circuitry. Place the required bypass capacitors adjacent to the corresponding supply pins and keep their loop area small. Validate startup, load transients, and measured-noise behavior because switching supply ripple can affect metering accuracy even when the MCU voltage itself remains within range.
Do not treat the 4 KB RAM as general-purpose scratch space. Profile the worst-case stack, ADC buffers, calibration coefficients, display buffers, communications descriptors, and logging structures together. Use bounded buffers and reserve memory for interrupt nesting and driver state. Validate firmware under maximum communications traffic, display activity, and background measurement load rather than only in an idle condition.
The real-time clock, communications routines, LCD updates, and sigma-delta conversion service can create uneven background activity in a metering instrument. Measure average and peak current across operating modes, then verify that the regulator, energy-storage components, and thermal design accommodate the worst interval rather than only the long-term average. The manufacturer datasheet should be used for device-specific clock, sleep-mode, and power-consumption details.
合規資訊
RoHS compliance is identified in the component listing. REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require manufacturer confirmation for the exact ordering code.