Texas Instruments

OPA2677N - Dual 220 MHz High-Current Amplifier | TI

MPN: OPA2677N ✓ 啟用中
5.5 mV Vdss 10 uA Id 14-pin SOIC Package
MOQ: 1 |

OPA2677N 概覽

The Texas Instruments OPA2677N is a dual, wideband, high-output-current operational amplifier and DSL/PLC line driver with a 220 MHz gain-bandwidth product, 2000 V/us slew rate, and 500 mA output current capability. The device is packaged in a 14-pin SOIC and can operate from a single +12 V supply.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its two inputs while using negative feedback to set gain accurately. The OPA2677 belongs to the current-feedback amplifier family, a topology well suited to high-speed, wideband signal chains where conventional voltage-feedback amplifiers may show gain-bandwidth and stability trade-offs.

Key features include unity-gain stability, a 10 uA input bias current, 5.5 mV input offset voltage, and low-distortion output stages capable of sourcing approximately 500 mA. According to the Texas Instruments product page, the OPA2677 consumes 9 mA per channel from a single +12 V supply while supporting more than 380 mA minimum output current, making it suitable for demanding xDSL customer-premises equipment and power-line modem drivers.

The current-feedback architecture preserves bandwidth across many closed-loop gain settings and supports rapid large-signal transitions. Its 2000 V/us slew rate reduces distortion when driving capacitive or resistive loads, while the high-current output stage avoids the load limitations associated with conventional precision operational amplifiers. Designers must still account for loop gain, trace resistance, output stability, and thermal dissipation when operating near the output-current limit.

Typical applications include ADSL and VDSL line-driver outputs, power-line communication modem drivers, instrumentation, wideband signal conditioning, and high-current buffer stages. The dual configuration allows two independent amplifier channels in one package, simplifying routing and reducing the component count in communications equipment.

A critical design practice is to keep feedback traces short and symmetrical, terminate unused channels according to the manufacturer recommendations, and provide local supply bypassing. Output-current capability does not guarantee unlimited drive into arbitrary loads; source impedance, load capacitance, supply voltage, and package thermal performance must be evaluated together.

This page combines the manufacturer’s electrical positioning with package, pricing, lifecycle, replacement, and application guidance. It also distinguishes a verified drop-in replacement from package-only or function-only alternatives, helping engineers avoid substitutions that change pinout, feedback behavior, supply requirements, or output-current capability.

直接替換替代品,適用於 OPA2677N — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此產品無可直接替換的替代品。

申請替代品

OPA2677N 最大額定值與電氣特性

Amplifier Type Dual current-feedback operational amplifier
Number of Channels 2 channels
Gain-Bandwidth Product 220 MHz
Slew Rate 2000 V/us
Input Bias Current 10 uA
Input Offset Voltage 5.5 mV
Supply Operation +12 V
靜態電流 9 mA/channel
最大輸出電流 500 mA
Minimum Output Current greater than 380 mA at +25 C
Gain Stability Unity-gain stable
封裝 14-pin SOIC
安裝類型 Surface mount
RoHS 狀態 Compliant
Primary Application DSL and PLC line-driver output
Amplifier Class SpeedPlus wideband high-output-current operational amplifier

OPA2677N 14-pin soic 腳位配置指南

OPA2677N(14-pin soic 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

OPA2677N 的 14-pin soic 封裝腳位圖

無詳細腳位定義資料: OPA2677N.

請參閱 資料表 以查看完整腳位配置。

典型應用

OPA2677N 適用於 6 應用s: ADSL and VDSL Line Drivers, Power-Line Communication Drivers, High-Current Buffer Stage, Wideband Instrumentation, Audio and Communication Output Amplification, Industrial Test Signal Generation.

🌐

ADSL and VDSL Line Drivers

The OPA2677N fits DSL line-driver output stages that require both wideband signal handling and substantial current drive. Its 220 MHz gain-bandwidth product, 2000 V/us slew rate, and approximately 500 mA output-current capability allow the amplifier to reproduce high-speed line waveforms while driving downstream transformer, network, or termination networks. According to the Texas Instruments product page, the device supports more than 380 mA minimum output current at +25 C from a single +12 V supply. The design must account for transformer loading, board parasitics, feedback-loop stability, and thermal rise under continuous transmission.

🏭

Power-Line Communication Drivers

The OPA2677N is suited to PLC modem output stages where the line interface must combine bandwidth with current capability. A 220 MHz gain-bandwidth product supports high-frequency signal content, while the 2000 V/us slew rate limits large-signal transition distortion. Its high-current output stage can deliver approximately 500 mA, helping the transmitter develop voltage across the intended network load. Designers should keep feedback components close to the device, evaluate output stability with the actual line transformer and cable capacitance, and verify thermal performance during sustained transmission.

⚡

High-Current Buffer Stage

OPA2677N can serve as a high-current buffer when the driven node is too demanding for a conventional precision operational amplifier. Unity-gain stability permits direct use as a non-inverting buffer, while approximately 500 mA output capability and 2000 V/us slew rate improve drive into resistive and capacitive loads. The 14-pin SOIC package contains two channels, allowing one section to buffer while the other handles a complementary signal. Confirm the load’s DC and AC current, watch the output-voltage swing, and provide adequate copper area for heat dissipation.

🖥️

Wideband Instrumentation

The OPA2677N is appropriate for instrumentation stages that must preserve high-frequency content and drive moderate loads rather than merely amplify nanoampere-level sensor signals. Its 220 MHz bandwidth and 2000 V/us slew rate provide ample dynamic capability for waveform conditioning, while the dual current-feedback architecture supports independent inverting and non-inverting channels. Stable feedback design remains essential because current-feedback amplifiers can become unstable with excessive feedback resistance or excess parasitic capacitance. Use short, direct feedback traces and verify the complete gain network against the manufacturer’s stability guidance.

🎧

Audio and Communication Output Amplification

OPA2677N can amplify communication and line-level signals when the output stage must deliver considerably more current than a conventional small-signal amplifier. The high-current output stage provides useful headroom for balanced line outputs, termination networks, and communication interfaces, while the 220 MHz bandwidth preserves fast edges. The trade-off is higher power consumption and a need for careful grounding because the wideband, high-current stage can reveal supply-impedance and layout problems. Bypass each supply pin locally and keep feedback and output routing compact to minimize oscillation and distortion risks.

🧰

Industrial Test Signal Generation

OPA2677N is useful in industrial test equipment that generates or buffers fast signals into moderately demanding loads. Its 2000 V/us slew rate supports rapid edge reproduction, and approximately 500 mA output capability provides more drive than a standard precision amplifier. The device can therefore buffer DAC outputs, excite limited sensor networks, or drive test fixtures while maintaining bandwidth. Design around the actual fixture capacitance because excessive load capacitance can perturb the output stage, and validate both output-current and temperature rise over long test cycles.

推薦產品摘要

OPA2677 Parent dual current-feedback amplifier family 用於: ADSL and VDSL Line Drivers, Power-Line Communication Drivers, High-Current Buffer Stage, Wideband Instrumentation, Audio and Communication Output Amplification, Industrial Test Signal Generation OPA2677N Texas Instruments 用於: ADSL and VDSL Line Drivers, Power-Line Communication Drivers, High-Current Buffer Stage, Wideband Instrumentation, Audio and Communication Output Amplification, Industrial Test Signal Generation
What is the operating voltage of OPA2677N?
The OPA2677N operates from a single +12 V supply in its principal DSL and PLC line-driver configuration. According to the Texas Instruments OPA2677 product page, this operating point supports a 9 mA-per-channel quiescent current while delivering more than 380 mA minimum output current at +25 C. The manufacturer identifies the device as suitable for high-current xDSL customer-premises equipment and power-line modem drivers.
What are the key specifications of OPA2677N that engineers should know?
The OPA2677N is a dual, unity-gain-stable current-feedback operational amplifier with 220 MHz gain-bandwidth product, 2000 V/us slew rate, and approximately 500 mA output-current capability. It operates from a single +12 V supply, consumes 9 mA per channel, has 10 uA input bias current, and is offered in a 14-pin SOIC package. These characteristics distinguish it from precision, low-noise amplifiers intended primarily for instrumentation.
Where to download the OPA2677N datasheet PDF?
The official OPA2677 information is available through the Texas Instruments product page linked on this page, where the manufacturer provides the device data sheet and ordering information. The product page identifies OPA2677N as a 14-pin SOIC version of the dual OPA2677 current-feedback amplifier. Use the manufacturer’s pin-description and electrical-characteristics tables when assigning PCB functions and validating the final operating conditions.
Where can I find the OPA2677N pinout?
The OPA2677N pin assignment is shown in the manufacturer’s OPA2677 data sheet, which should be consulted before routing the 14-pin SOIC footprint. The device contains two current-feedback amplifier channels with their associated supply and ground pins. Use the package drawing and pin-description table together so the physical orientation, exposed connections, and channel assignments remain consistent with the selected orderable part.
What can replace OPA2677N?
A valid replacement for the OPA2677N must preserve its 14-pin SOIC pinout, current-feedback topology, supply arrangement, and approximately 500 mA output-current capability. No separate pin-to-pin cross-reference was established for this exact orderable part. Packaging-only order codes and the 16-pin OPA2677T do not qualify as drop-in replacements, because the latter changes the footprint and cannot be substituted without a PCB redesign.
Is OPA2677N suitable for ADSL and VDSL line drivers?
Yes, the OPA2677N is specifically positioned for ADSL and VDSL line-drive applications. According to the Texas Instruments product page, its high-current output stage can source more than 380 mA minimum output current at +25 C and supports demanding xDSL customer-premises-equipment requirements. The 220 MHz bandwidth and 2000 V/us slew rate also provide the speed needed for wideband communications signals.
How much output current can OPA2677N source?
The OPA2677N is rated for approximately 500 mA output current. The Texas Instruments product page states that it delivers more than 380 mA minimum output current at +25 C on a single +12 V supply. Actual continuous current depends on the load, supply voltage, output voltage, thermal conditions, and stability requirements, so the load and PCB thermal design must be checked against those operating limits.
What is the difference between voltage-feedback and current-feedback operation in OPA2677N?
The OPA2677N uses current feedback, meaning feedback-network current rather than only closed-loop voltage error governs the amplifier’s behavior. This architecture is well suited to wideband, high-output-current service and can retain useful bandwidth across multiple closed-loop gains. The 220 MHz gain-bandwidth product and 2000 V/us slew rate distinguish its intended communications use from slower precision amplifier families.
OPA2677N vs OPA2677T — which is pin compatible?
The OPA2677N and OPA2677T are not pin-compatible drop-in alternatives. The OPA2677N uses a 14-pin SOIC package, while the comparison information identifies the OPA2677T as a 16-pin SOIC device. Because the package pin count and footprint differ, OPA2677T requires a PCB layout change and must not be treated as a direct socket replacement for OPA2677N.
When should I choose OPA2677N over a conventional precision op amp?
Choose the OPA2677N when the output must drive a relatively high current and the signal path requires wideband performance. Its approximately 500 mA output capability, 220 MHz gain-bandwidth product, and 2000 V/us slew rate are substantially different from a typical precision amplifier optimized for low offset, low noise, and microampere-level loads. The trade-off is higher supply current and greater sensitivity to feedback-layout quality.
Is OPA2677N the same as OPA2677N/2K5?
OPA2677N and OPA2677N/2K5 are orderable variants within the OPA2677 family rather than independently verified substitute amplifiers. Their shared electrical identity makes the suffix important for procurement, while the packaging code determines how the device is supplied. Treat the exact MPN as the controlling BOM entry and confirm the required package, tape-and-reel configuration, and manufacturer ordering information before substitution.
What is the best Analog Devices equivalent for OPA2677N?
The best equivalent is not established by family name alone; it must be a documented 14-pin pin-to-pin replacement with comparable current-feedback behavior and approximately 500 mA output capability. No such Analog Devices drop-in cross-reference was established for the exact OPA2677N. Devices with similar bandwidth but lower output current, different feedback topology, or another package are functional alternatives rather than drop-in replacements.
Where to buy OPA2677N online?
Use the Request a Quote form on this page to request OPA2677N pricing, current availability, minimum order quantity, and lead time. Quote requests should state the exact OPA2677N MPN, required package configuration, and expected annual or prototype quantity. This approach gives procurement one consistent request path while avoiding static availability information that can change without notice.
What is the price of OPA2677N?
Current OPA2677N commercial terms should be obtained through the Request a Quote form on this page. Submit the exact MPN OPA2677N, desired package or shipment configuration, and quantity so the quote reflects the appropriate commercial basis. Engineers can use the Request a Quote form for prototype quantities and production scheduling without relying on a potentially stale individual unit figure.
What is the lead time for OPA2677N?
The current lead time for OPA2677N should be confirmed through the Request a Quote form on this page. Include the exact orderable MPN, target quantity, and required delivery date when submitting the request. Because manufacturing schedules and inventory can vary, request a date-confirmed quotation for prototypes, recurring production, or scheduled multi-release deliveries.
Is OPA2677N in stock?
Current OPA2677N stock should be checked through the Request a Quote form on this page. Include the exact MPN, required package configuration, and quantity in the request so the supplier can confirm availability for the intended shipment format. For production planning, request both an initial availability statement and a lead time covering the expected rollout.

工程參考資料,適用於 OPA2677N — 比較、設計指引及合規資訊。

選型指南

Choose the OPA2677N when the output stage must combine wideband signal integrity with current capability, particularly in ADSL, VDSL, and PLC transmitter paths. Its 220 MHz gain-bandwidth product, 2000 V/us slew rate, approximately 500 mA output current, and 14-pin SOIC package make it appropriate for line driving and high-current buffering. Choose a precision amplifier instead when the primary requirements are minimum offset, low noise, and microampere-level output current rather than drive capability. Do not select OPA2677T as a direct replacement because its 16-pin package changes the footprint. OPA2677N/2K5 belongs to the same family but primarily changes the orderable packaging configuration, so procurement must confirm the required shipping form. No other drop-in substitute should be assumed without a verified pinout, feedback architecture, supply range, output-current, and stability comparison.

與替代品比較

參數 本產品
Package 14-pin SOIC
Brand Texas Instruments
Amplifier Architecture Dual current-feedback operational amplifier
Gain-Bandwidth Product 220 MHz
Slew Rate 2000 V/us
Output Current Approximately 500 mA
Quiescent Current 9 mA/channel
Input Bias Current 10 uA
Input Offset Voltage 5.5 mV
Supply Configuration Single +12 V

主要差異化特點

  • Substantially higher output-current capability than conventional precision amplifiers (對比OPA2677T)
  • High-speed current-feedback operation in a dual 14-pin SOIC (對比OPA2677N/2K5)
  • Purpose-built combination of bandwidth, slew rate, and drive current (對比Generic precision operational amplifier)

設計說明

Keep the feedback network, input connections, and output routing compact because current-feedback amplifiers can become unstable when large parasitic capacitance appears inside the feedback loop. Place input and feedback components close to their associated pins, use short ground returns, and avoid routing the output directly beneath sensitive input nodes. Confirm that the complete feedback network remains stable at the intended closed-loop gain and load.

Design the +12 V supply path for both signal fidelity and output-current demand. Place short, low-inductance bypass capacitors from each supply pin to the appropriate ground plane, and provide an additional local reservoir capacitor where the load can draw approximately 500 mA. Check the source impedance at the amplifier pins because supply noise and supply droop can reduce output headroom and increase distortion during large-signal operation.

Estimate output dissipation from the actual output voltage, load current, and supply voltage rather than treating the 500 mA rating as a continuously usable operating point. Use the 14-pin SOIC land pattern and surrounding PCB copper to lower junction temperature, while keeping exposed lead and pad geometry consistent with the manufacturer’s package drawing. Recheck the output-current limit at the highest expected ambient temperature and during sustained transmission.

Do not substitute a generic precision amplifier, a lower-current line driver, or a different package on the assumption that similar bandwidth is sufficient. Current-feedback behavior, supply rails, output swing, output-current capability, and pin assignment all affect interchangeability. Confirm that unused channels are terminated as directed in the manufacturer documentation and verify the output stage against the actual resistive and capacitive load.

合規資訊

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

RoHS compliance is stated in the OPA2677N distributor listing. No separate REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was established for this exact orderable part.

相關搜尋

OPA2677N datasheet OPA2677N pinout OPA2677N datasheet pdf OPA2677N equivalent OPA2677N replacement OPA2677N cross reference OPA2677N vs OPA2677T OPA2677N SOIC-14 pinout OPA2677N 220 MHz amplifier OPA2677N 500 mA output OPA2677N DSL line driver Texas Instruments OPA2677N OPA2677N price OPA2677N stock

相關元件與詞彙

Texas Instruments OPA2677N OPA2677 OPA2677N/2K5 OPA2677T Operational amplifier Current-feedback amplifier Voltage-feedback amplifier Amplifier IC Analog integrated circuit Semiconductor SpeedPlus DSL line driver PLC line driver ADSL VDSL SOIC-14 Surface mount Gain-bandwidth product Slew rate Output current Input bias current Input offset voltage Quiescent current RoHS
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情