P1014NXN5DFA557 - QorIQ P1 PowerPC e500v2 MPU 533MHz TEPBGA-425 | NXP
MPN： P1014NXN5DFA557 ✓ 啟用中P1014NXN5DFA557 概覽
A QorIQ communications processor is a system-on-chip (SoC) that integrates one or more CPU cores with networking-specific accelerators, memory controllers, security engines, and high-speed serial interfaces. Within the NXP ecosystem, the P1 series sits below the higher-tier P2/P3 multi-core parts but above the entry-level QorIQ devices. The P1014 specifically targets applications requiring deterministic single-thread performance with low power consumption.
Key features include a 32-bit PowerPC e500v2 core with integrated L1/L2 cache hierarchy, a DDR2/DDR3 memory controller, multiple Gigabit Ethernet interfaces, PCI Express support, USB 2.0, SD/MMC, and integrated security acceleration engines. The 425-ball TEPBGA package provides the I/O density required for high-bandwidth networking applications while maintaining a compact 19x19 mm footprint suitable for space-constrained embedded designs.
The P1014 is built on a CMOS process optimized for low power dissipation in thermally constrained networking environments. Its integrated architecture reduces the need for external peripherals, lowering overall BOM cost and simplifying PCB layout in applications like industrial Ethernet switches, edge routers, and serial-to-IP protocol converters.
Typical applications include industrial Ethernet switches, protocol gateways, serial-to-Ethernet converters, factory automation controllers, and embedded computing modules. The combination of low power, deterministic performance, and integrated networking interfaces makes it well-suited for these embedded networking scenarios.
When designing with this part, ensure adequate thermal management for the BGA package, proper DDR signal integrity routing per NXP design guidelines, and careful power-rail sequencing to avoid latch-up. Reference NXP's P1014 hardware specifications document for the complete schematic and layout recommendations.
This page synthesizes distributor pricing, drop-in compatible alternatives, and practical design guidance not found in the manufacturer datasheet alone, helping procurement and design engineers make informed component decisions.
直接替換替代品，適用於 P1014NXN5DFA557 — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： P1014NXN5DFA557 （相同外形與佔位） — 差異在於 Manufacturer, Memory Controller, Core Architecture, Package, Maximum Clock Frequency.
P1014NSN5DFA557
✅ 直接替換聯絡詢價
查看資料表 →P1013NXN5DFA
✅ 直接替換📋 參考替代品（不在目錄中）
P1014NXN5HFA
✅ 直接替換聯絡詢價
查看資料表 →P1014NXN5DFA557 最大額定值與電氣特性
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | QorIQ P1 |
| Core Architecture | PowerPC e500v2 |
| Number of Cores | 1 |
| 資料匯流排寬度 | 32-bit |
| 最大時脈頻率 | 533 MHz |
| 封裝 | 425-TEPBGA I (19x19 mm) |
| Process Technology | CMOS |
| Memory Controller | DDR2/DDR3 (per family datasheet) |
| Ethernet Interfaces | Multiple Gigabit Ethernet (per family datasheet) |
| PCI Express | Yes (per family datasheet) |
| USB | USB 2.0 (per family datasheet) |
| 安裝類型 | Surface Mount |
P1014NXN5DFA557 425-tepbga i (19x19 mm) 腳位配置指南
P1014NXN5DFA557（425-tepbga i (19x19 mm) 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： P1014NXN5DFA557.
請參閱 資料表 以查看完整腳位配置。
典型應用
P1014NXN5DFA557 適用於 6 應用s: Industrial Ethernet Switch, Protocol Gateway and Serial-to-Ethernet Converter, Edge Router and Network Appliance, Factory Automation Controller, Embedded Computing Module (SoM), Building Automation and Energy Management.
Industrial Ethernet Switch
The P1014NXN5DFA557 is well suited for managed industrial Ethernet switch designs where deterministic single-core performance and integrated Gigabit Ethernet MACs reduce BOM cost. At 533 MHz, the e500v2 core handles L2/L3 forwarding, QoS classification, and management plane tasks while the integrated DDR2/DDR3 controller supports high-throughput packet buffering. The 425-ball TEPBGA I (19x19 mm) package provides sufficient I/O for multiple Ethernet ports, a switch fabric interface, and management connectivity. Compared with multi-core parts, the P1014 dissipates significantly less power, enabling fanless industrial switch designs in DIN-rail or panel-mount enclosures.
推薦
Protocol Gateway and Serial-to-Ethernet Converter
Protocol gateway applications converting legacy industrial serial protocols (Modbus RTU, Profibus, CAN) to Ethernet benefit from the P1014NXN5DFA557's deterministic PowerPC e500v2 core and rich peripheral set. The 533 MHz clock speed handles real-time serial protocol stacks with adequate headroom for protocol translation logic. Integrated USB 2.0, PCI Express, and multiple UART interfaces (via the QorIQ peripheral set) allow direct connection to legacy field devices without external bridge chips. The CMOS process keeps power consumption low enough for DIN-rail gateway designs that lack active cooling.
推薦
Edge Router and Network Appliance
The P1014NXN5DFA557 serves as the main processor in cost-optimized edge routers and small-form-factor network appliances where single-core PowerPC performance at 533 MHz is sufficient for routing table lookup, NAT, and basic firewall functions. The integrated DDR memory controller supports the memory bandwidth required for routing tables and packet buffers. PCI Express enables connection to external PHY or switch fabric devices, while the compact 19x19 mm TEPBGA package fits within space-constrained appliance form factors. Compared to ARM-based competitors, the PowerPC e500v2 core offers strong deterministic interrupt response for real-time packet processing.
推薦
Factory Automation Controller
Factory automation controllers require deterministic processing for motion control loops, I/O handling, and protocol bridging, all areas where the P1014NXN5DFA557's single-core 533 MHz PowerPC e500v2 architecture excels. The integrated peripheral set supports industrial fieldbus interfaces, GPIO banks for digital I/O, and high-speed serial for encoder feedback. The industrial temperature grade variant (P1014NSN5DFA557) extends operation to factory floor thermal environments. The compact TEPBGA I package allows compact controller PCB designs with sufficient routing area for industrial connector pin-outs and isolation barriers.
推薦
Embedded Computing Module (SoM)
System-on-Module designs based on the P1014NXN5DFA557 provide a complete embedded computing platform in a compact form factor, leveraging the integrated peripheral set and PowerPC e500v2 core at 533 MHz. The module exposes Ethernet, USB, PCI Express, and storage interfaces to a carrier board, simplifying end-product development. The 19x19 mm TEPBGA package keeps the SoM footprint compact while still providing the I/O density required for industrial and networking applications. This approach significantly reduces time-to-market for OEMs building specialized networking and industrial products.
推薦
Building Automation and Energy Management
Building automation systems running BACnet, KNX, or LonWorks protocol stacks benefit from the P1014NXN5DFA557's deterministic PowerPC processing and low power consumption. At 533 MHz, the e500v2 core comfortably handles multiple building automation protocols simultaneously along with supervisory logic. The integrated Ethernet, USB, and serial interfaces allow direct connection to building automation buses, touch panels, and management networks. The CMOS process and compact TEPBGA package make the P1014 suitable for wall-mounted controllers and DIN-rail energy management gateways with passive cooling requirements.
推薦
推薦產品摘要
工程參考資料，適用於 P1014NXN5DFA557 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | P1014NSN5DFA557 | P1013NXN5DFA | P1014NXN5HFA |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 425-TEPBGA I (19x19 mm) | 425-TEPBGA I (19x19 mm) - same | 425-TEPBGA I (19x19 mm) - same | 425-TEPBGA I (19x19 mm) - same |
| Core Architecture | PowerPC e500v2 | PowerPC e500v2 | PowerPC e500v2 | PowerPC e500v2 |
| Core Count | 1 | 1 | 1 | 1 |
| Max Clock Frequency | 533 MHz | 533 MHz | ~400 MHz (lower speed grade) | 533 MHz |
| Data Bus Width | 32-bit | 32-bit | 32-bit | 32-bit |
| Temperature Grade | Commercial (per 'X' suffix) | Extended industrial (per 'S' suffix) | Commercial | Commercial |
| Order Code Family | P1014NXN5DFA557 | P1014NSN5DFA557 (temp-grade variant) | P1013NXN5DFA (lower-speed family) | P1014NXN5HFA (reel/packaging variant) |
主要差異化特點
- Industrial temperature grade option within same footprint (對比P1014NSN5DFA557)
- Same-family drop-in at lower cost (對比P1013NXN5DFA)
- Identical silicon across packaging/reel suffixes (對比P1014NXN5HFA)
設計說明
The 425-ball TEPBGA I (19x19 mm) package dissipates heat primarily through the ball grid and PCB copper layers. Per NXP QorIQ P1 hardware specifications, follow the recommended PCB thermal via pattern under the BGA to maintain junction temperature within limits. In fanless industrial designs, ensure adequate copper area or thermal interface material to the enclosure.
DDR2/DDR3 signal integrity is critical for the P1014NXN5DFA557. Per NXP design guidelines, route the DDR data/address/control traces with matched impedance (typically 50 ohms single-ended), use length matching within the specified tolerance, and place the DDR termination resistors per the reference design. Reference NXP's hardware specifications manual for the exact PCB layout recommendations.
Do not substitute the P1014 with the multi-core P1020 series without PCB redesign. The P1020 uses a different package and pinout, despite sharing the QorIQ P1 family branding. Verify package dimensions and ball map against the P1014 reference design before any cross-family substitution, and confirm boot ROM and memory controller compatibility for your specific firmware.
合規資訊
Compliance status not explicitly stated in the verified web data for P1014NXN5DFA557. Refer to NXP product documentation or the official datasheet for definitive RoHS, REACH, and lead-free status. AEC-Q100 is not applicable for a communications MPU of this class.
