PCM1702U/2K - 20-Bit Stereo Audio DAC | Texas Instruments
MPN: PCM1702U/2K ✗ 停產PCM1702U/2K 概覽
An audio DAC is a data converter that accepts digital audio samples and generates proportional analog voltages or currents suitable for audio amplification. In the signal-chain hierarchy, the PCM1702 belongs to the digital-to-analog converter class, the broader ADC/DAC category, and ultimately the semiconductor and audio-signal-conversion markets. It is intended for designs requiring precise conversion of CD-audio-format data into left and right analog channels.
Key characteristics include 20-bit resolution, 44.1 kHz sampling support, dual-channel operation, a serial interface, and low-power bipolar analog output stages. According to the manufacturer datasheet, full-scale distortion is typically -96 dB and signal-to-noise ratio is typically 120 dB when measured with the A-weighted method. The sign-magnitude architecture improves behavior near zero, while the short 0.2 microsecond settling time supports accurate reconstruction of sampled audio waveforms.
The PCM1702 family provides separate analog, digital, and ground connections that support careful partitioning of sensitive signal paths. Its serial input reduces the number of data connections compared with a parallel interface, simplifying routing on a compact audio board. Because this is a bipolar-output converter, the associated output stage and analog supply design materially influence channel balance, noise, and achievable distortion performance.
Typical applications include CD player and digital-audio transport boards, high-fidelity stereo DAC products, professional audio equipment, and digital mixers requiring a dedicated 20-bit stereo conversion stage. It can also be used in instrumentation or communications equipment when its specified 44.1 kHz rate and low-noise bipolar output are appropriate.
The primary design consideration is analog supply and output conditioning. Follow the manufacturer datasheet for decoupling, output filtering, grounding, and component selection around the DAC pins. Treat the converter and its analog output path as a high-accuracy measurement chain rather than as a generic logic output.
This product page combines the converter's principal electrical characteristics, verified package information, family drop-in options, comparison parameters, and practical application guidance. It is intended to help engineers evaluate the PCM1702U/2K for legacy and new high-fidelity audio designs.
直接替換替代品,適用於 PCM1702U/2K — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: PCM1702U/2K (相同外形與佔位) — 差異在於 Converter Type, Package, Signal-to-Noise Ratio.
PCM1702U-K/2K
✅ 直接替換📋 參考替代品(不在目錄中)
PCM1702U-K/2KE6
✅ 直接替換📋 參考替代品(不在目錄中)
PCM1702U/2KE6
✅ 直接替換📋 參考替代品(不在目錄中)
PCM1702U/2K 最大額定值與電氣特性
| Converter Type | Stereo audio digital-to-analog converter |
| 解析度 | 20 bit |
| 取樣率 | 44.1 kHz |
| Number of Channels | 2 channels |
| Digital Interface | Serial |
| Architecture | Advanced sign-magnitude BiCMOS |
| Full-Scale Distortion | -96 dB typical |
| Signal-to-Noise Ratio | 120 dB typical, A-weighted |
| Settling Time | 0.2 microseconds |
| Analog Supply Voltage | +/-5 V |
| 封裝 | 20-pin SOIC, 5.30 mm nominal body width |
| 安裝類型 | Surface mount |
| Package Code | PDSO20 |
| 輸出配置 | Dual-channel bipolar analog output |
PCM1702U/2K pdso20 腳位配置指南
PCM1702U/2K(pdso20 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: PCM1702U/2K.
請參閱 資料表 以查看完整腳位配置。
典型應用
PCM1702U/2K 適用於 6 應用s: High-Fidelity CD Player, Digital Audio Transport, Professional Stereo Monitoring, Digital Mixer Audio Output Stage, Hi-Fi Stereo DAC, Digital Audio Test and Measurement.
High-Fidelity CD Player
The PCM1702U/2K fits a CD-player reconstruction stage because it supports 44.1 kHz serial audio at 20-bit resolution and provides two analog output channels for stereo playback. According to the Texas Instruments PCM1702 datasheet, its advanced sign-magnitude architecture reduces unwanted glitches and nonlinear behavior around bipolar zero, while typical full-scale distortion is -96 dB. A practical implementation places the converter between the recovered digital-audio stream and the analog output filter, using the dual ±5 V analog supplies specified for its bipolar architecture. The resulting design benefits from a straightforward 44.1 kHz signal path without a parallel data bus. Board-level success still depends on compliant clocking, clean grounding, correct output-network values, and separation of sensitive analog traces from digital switching nodes.
推薦
Digital Audio Transport
PCM1702U/2K is suitable for a digital audio transport that receives a 44.1 kHz serial stream and requires local analog conversion for monitoring or line-level output. Its 20-bit resolution preserves the source word length, and the dual-channel output supports the left and right signals without separate converters. The manufacturer's typical 120 dB A-weighted SNR and -96 dB full-scale distortion provide useful baselines for a low-noise transport output stage. Install the DAC close to the output connector and analog amplifier, keep the serial clock route away from the output network, and use the datasheet-recommended bypass and filtering arrangements. The converter's serial interface reduces board routing compared with a parallel DAC, which is helpful when the transport must fit a compact enclosure while maintaining short, controlled analog paths.
推薦
Professional Stereo Monitoring
The PCM1702U/2K can serve as the conversion element in a professional stereo monitoring path that operates at 44.1 kHz and emphasizes low distortion near signal zero. Its advanced sign-magnitude architecture is particularly relevant to audio waveforms that cross bipolar zero repeatedly, while the typical 120 dB A-weighted SNR supports a low-noise monitoring baseline. Place the device between the digital audio processor and the balanced or unbalanced line-output stage, and treat the analog supply, grounding, and output filters as part of the converter's accuracy budget. The 20-pin SOIC footprint is compatible with automated surface-mount assembly. Although the 44.1 kHz rate is appropriate for CD-derived material, a professional installation requiring higher-rate multichannel or higher-resolution conversion should evaluate a modern audio DAC family instead.
推薦
Digital Mixer Audio Output Stage
PCM1702U/2K is applicable to a digital mixer requiring a dedicated 20-bit stereo analog-output converter for a 44.1 kHz internal bus. Its dual-channel architecture reduces the component count compared with two single-channel converters, while the serial interface supports compact digital routing. The manufacturer's typical -96 dB full-scale distortion is suitable for reducing signal-level degradation in a mixer output path, and the 120 dB A-weighted SNR helps preserve quiet program material. Connect the converter output to the mixer's line-output driver, use low-noise ±5 V analog rails, and isolate clock and data routing from the sensitive output section. Because the device supports only one listed sampling rate, the digital mixer must provide appropriate clocking and format compatibility rather than expecting arbitrary-rate resampling from this component.
推薦
Hi-Fi Stereo DAC
PCM1702U/2K aligns with a dedicated hi-fi stereo DAC architecture requiring an authentic 44.1 kHz conversion path and 20-bit word length. The advanced sign-magnitude architecture targets glitch and nonlinearity behavior around zero, while the specified typical distortion of -96 dB and A-weighted SNR of 120 dB provide useful performance figures when designing the analog output chain. Use the serial interface to accept data from a digital source or transport, then follow the manufacturer application guidance for the analog output network and supply bypass. Because the converter produces bipolar outputs from dual ±5 V rails, output coupling and balancing considerations differ from a single-supply DAC design. Keep the converter, output filter, and connector path physically compact so that the intended low-noise performance is not degraded by long traces or shared noisy return paths.
推薦
Digital Audio Test and Measurement
PCM1702U/2K can be used in a compact digital-audio test instrument that generates or reconstructs 44.1 kHz stereo waveforms. Its 20-bit resolution supports two-channel digital synthesis or analysis, and the manufacturer reports a typical 0.2 microsecond settling time, which is useful for characterizing the complete output path. Use it as the final conversion stage between digital test-vector generation and an analog measurement instrument. Its low typical distortion provides a meaningful baseline when evaluating output filters, coupling networks, and balanced-output stages. The test board should include datasheet-compliant bypass capacitors and controlled grounding, because supply and return impedances can influence measured noise. Because this converter is limited to the listed 44.1 kHz rate, test vectors at other frequencies require clocking and filtering plans that remain within the device's operating limits.
推薦
推薦產品摘要
工程參考資料,適用於 PCM1702U/2K — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PCM1702U-K/2K | PCM1702U-K/2KE6 | PCM1702U/2KE6 | PCM1702U |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC |
| Converter Type | Stereo audio DAC | Stereo audio DAC | Stereo audio DAC | Stereo audio DAC | Stereo audio DAC |
| Resolution | 20 bit | 20 bit | 20 bit | 20 bit | 20 bit |
| Sampling Rate | 44.1 kHz | 44.1 kHz | 44.1 kHz | 44.1 kHz | 44.1 kHz |
| Number of Channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Digital Interface | Serial | Serial | Serial | Serial | Serial |
| Analog Supply | +/-5 V | +/-5 V | +/-5 V | +/-5 V | +/-5 V |
| Full-Scale Distortion | -96 dB typical | -96 dB typical for PCM1702 family | -96 dB typical for PCM1702 family | -96 dB typical for PCM1702 family | -96 dB typical for PCM1702 family |
| Signal-to-Noise Ratio | 120 dB typical, A-weighted | 120 dB typical, A-weighted for PCM1702 family | 120 dB typical, A-weighted for PCM1702 family | 120 dB typical, A-weighted for PCM1702 family | 120 dB typical, A-weighted for PCM1702 family |
| Architecture | Advanced sign-magnitude BiCMOS | Advanced sign-magnitude BiCMOS | Advanced sign-magnitude BiCMOS | Advanced sign-magnitude BiCMOS | Advanced sign-magnitude BiCMOS |
主要差異化特點
- Purpose-built 44.1 kHz stereo conversion (對比PCM1702U-K/2K)
- Advanced sign-magnitude operation (對比PCM1702U)
- Direct serial-interface reuse (對比PCM1704U-J/2K)
設計說明
Use the manufacturer PCM1702 datasheet as the authority for the complete 20-pin assignment and recommended decoupling arrangement. Place input and output bypass capacitors directly at the relevant device pins, keep the analog output traces short, and separate the analog and digital return paths as far as practical. The bipolar output architecture makes grounding and supply return impedance especially important to channel balance and noise performance.
Route the serial clock, data, and control signals away from the analog outputs and reconstruction filter. These signals are low frequency at 44.1 kHz, but their edges can contain high-frequency harmonics capable of coupling into a high-impedance analog path. Use a continuous ground reference, avoid splitting the analog return beneath the converter, and follow the manufacturer application schematic for the output-filter topology and component values.
Provide clean +5 V and -5 V analog rails with the decoupling required by the manufacturer datasheet. Estimated analog power: the two 5 V rails at 10 V total combined with a combined current of 0.02 A would imply approximately 0.2 W; this is an illustrative calculation, not a datasheet specification. Confirm actual supply currents for the operating mode and grade before sizing regulators or thermal provisions.
Do not treat PCM1702U, PCM1702U/2K, PCM1702U-K/2K, and the /2KE6 ordering codes as automatically interchangeable. Check the complete ordering suffix, grade, temperature range, lifecycle status, package orientation, and pin functions in the manufacturer documentation. Also avoid substituting a modern PCM179x device as a drop-in part, since higher resolution and different interface or package requirements can require board changes.
合規資訊
Compliance declarations and automotive qualification were not established by the manufacturer extracts. The AEC-Q100 field is not applicable because no automotive qualification was identified for this audio converter.