PCM1702U/2K - 20-Bit Stereo Audio DAC | Texas Instruments
MPN: PCM1702U/2K ✗ Cuối đờiPCM1702U/2K Tóm tắt
An audio DAC is a data converter that accepts digital audio samples and generates proportional analog voltages or currents suitable for audio amplification. In the signal-chain hierarchy, the PCM1702 belongs to the digital-to-analog converter class, the broader ADC/DAC category, and ultimately the semiconductor and audio-signal-conversion markets. It is intended for designs requiring precise conversion of CD-audio-format data into left and right analog channels.
Key characteristics include 20-bit resolution, 44.1 kHz sampling support, dual-channel operation, a serial interface, and low-power bipolar analog output stages. According to the manufacturer datasheet, full-scale distortion is typically -96 dB and signal-to-noise ratio is typically 120 dB when measured with the A-weighted method. The sign-magnitude architecture improves behavior near zero, while the short 0.2 microsecond settling time supports accurate reconstruction of sampled audio waveforms.
The PCM1702 family provides separate analog, digital, and ground connections that support careful partitioning of sensitive signal paths. Its serial input reduces the number of data connections compared with a parallel interface, simplifying routing on a compact audio board. Because this is a bipolar-output converter, the associated output stage and analog supply design materially influence channel balance, noise, and achievable distortion performance.
Typical applications include CD player and digital-audio transport boards, high-fidelity stereo DAC products, professional audio equipment, and digital mixers requiring a dedicated 20-bit stereo conversion stage. It can also be used in instrumentation or communications equipment when its specified 44.1 kHz rate and low-noise bipolar output are appropriate.
The primary design consideration is analog supply and output conditioning. Follow the manufacturer datasheet for decoupling, output filtering, grounding, and component selection around the DAC pins. Treat the converter and its analog output path as a high-accuracy measurement chain rather than as a generic logic output.
This product page combines the converter's principal electrical characteristics, verified package information, family drop-in options, comparison parameters, and practical application guidance. It is intended to help engineers evaluate the PCM1702U/2K for legacy and new high-fidelity audio designs.
Bộ thay thế dễ dàng lắp đặt cho PCM1702U/2K — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PCM1702U/2K (cùng hình factor và footprint) — khác nhau ở Converter Type, Package, Signal-to-Noise Ratio.
PCM1702U-K/2K
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PCM1702U-K/2KE6
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PCM1702U/2KE6
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PCM1702U
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PCM1702U/2K Tỷ lệ tối đa & tính chất điện
| Converter Type | Stereo audio digital-to-analog converter |
| Độ phân giải | 20 bit |
| Tỷ lệ lấy mẫu | 44.1 kHz |
| Number of Channels | 2 channels |
| Digital Interface | Serial |
| Architecture | Advanced sign-magnitude BiCMOS |
| Full-Scale Distortion | -96 dB typical |
| Signal-to-Noise Ratio | 120 dB typical, A-weighted |
| Settling Time | 0.2 microseconds |
| Analog Supply Voltage | +/-5 V |
| Hộp | 20-pin SOIC, 5.30 mm nominal body width |
| Kiểu lắp đặt | Surface mount |
| Package Code | PDSO20 |
| Cấu hình đầu ra | Dual-channel bipolar analog output |
Hướng dẫn cấu hình chân PCM1702U/2K pdso20
Cấu hình chân cho PCM1702U/2K (pdso20 gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho PCM1702U/2K.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PCM1702U/2K phù hợp cho 6 Áp dụngs: High-Fidelity CD Player, Digital Audio Transport, Professional Stereo Monitoring, Digital Mixer Audio Output Stage, Hi-Fi Stereo DAC, Digital Audio Test and Measurement.
High-Fidelity CD Player
The PCM1702U/2K fits a CD-player reconstruction stage because it supports 44.1 kHz serial audio at 20-bit resolution and provides two analog output channels for stereo playback. According to the Texas Instruments PCM1702 datasheet, its advanced sign-magnitude architecture reduces unwanted glitches and nonlinear behavior around bipolar zero, while typical full-scale distortion is -96 dB. A practical implementation places the converter between the recovered digital-audio stream and the analog output filter, using the dual ±5 V analog supplies specified for its bipolar architecture. The resulting design benefits from a straightforward 44.1 kHz signal path without a parallel data bus. Board-level success still depends on compliant clocking, clean grounding, correct output-network values, and separation of sensitive analog traces from digital switching nodes.
Được đề xuất
Digital Audio Transport
PCM1702U/2K is suitable for a digital audio transport that receives a 44.1 kHz serial stream and requires local analog conversion for monitoring or line-level output. Its 20-bit resolution preserves the source word length, and the dual-channel output supports the left and right signals without separate converters. The manufacturer's typical 120 dB A-weighted SNR and -96 dB full-scale distortion provide useful baselines for a low-noise transport output stage. Install the DAC close to the output connector and analog amplifier, keep the serial clock route away from the output network, and use the datasheet-recommended bypass and filtering arrangements. The converter's serial interface reduces board routing compared with a parallel DAC, which is helpful when the transport must fit a compact enclosure while maintaining short, controlled analog paths.
Được đề xuất
Professional Stereo Monitoring
The PCM1702U/2K can serve as the conversion element in a professional stereo monitoring path that operates at 44.1 kHz and emphasizes low distortion near signal zero. Its advanced sign-magnitude architecture is particularly relevant to audio waveforms that cross bipolar zero repeatedly, while the typical 120 dB A-weighted SNR supports a low-noise monitoring baseline. Place the device between the digital audio processor and the balanced or unbalanced line-output stage, and treat the analog supply, grounding, and output filters as part of the converter's accuracy budget. The 20-pin SOIC footprint is compatible with automated surface-mount assembly. Although the 44.1 kHz rate is appropriate for CD-derived material, a professional installation requiring higher-rate multichannel or higher-resolution conversion should evaluate a modern audio DAC family instead.
Được đề xuất
Digital Mixer Audio Output Stage
PCM1702U/2K is applicable to a digital mixer requiring a dedicated 20-bit stereo analog-output converter for a 44.1 kHz internal bus. Its dual-channel architecture reduces the component count compared with two single-channel converters, while the serial interface supports compact digital routing. The manufacturer's typical -96 dB full-scale distortion is suitable for reducing signal-level degradation in a mixer output path, and the 120 dB A-weighted SNR helps preserve quiet program material. Connect the converter output to the mixer's line-output driver, use low-noise ±5 V analog rails, and isolate clock and data routing from the sensitive output section. Because the device supports only one listed sampling rate, the digital mixer must provide appropriate clocking and format compatibility rather than expecting arbitrary-rate resampling from this component.
Được đề xuất
Hi-Fi Stereo DAC
PCM1702U/2K aligns with a dedicated hi-fi stereo DAC architecture requiring an authentic 44.1 kHz conversion path and 20-bit word length. The advanced sign-magnitude architecture targets glitch and nonlinearity behavior around zero, while the specified typical distortion of -96 dB and A-weighted SNR of 120 dB provide useful performance figures when designing the analog output chain. Use the serial interface to accept data from a digital source or transport, then follow the manufacturer application guidance for the analog output network and supply bypass. Because the converter produces bipolar outputs from dual ±5 V rails, output coupling and balancing considerations differ from a single-supply DAC design. Keep the converter, output filter, and connector path physically compact so that the intended low-noise performance is not degraded by long traces or shared noisy return paths.
Được đề xuất
Digital Audio Test and Measurement
PCM1702U/2K can be used in a compact digital-audio test instrument that generates or reconstructs 44.1 kHz stereo waveforms. Its 20-bit resolution supports two-channel digital synthesis or analysis, and the manufacturer reports a typical 0.2 microsecond settling time, which is useful for characterizing the complete output path. Use it as the final conversion stage between digital test-vector generation and an analog measurement instrument. Its low typical distortion provides a meaningful baseline when evaluating output filters, coupling networks, and balanced-output stages. The test board should include datasheet-compliant bypass capacitors and controlled grounding, because supply and return impedances can influence measured noise. Because this converter is limited to the listed 44.1 kHz rate, test vectors at other frequencies require clocking and filtering plans that remain within the device's operating limits.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PCM1702U/2K — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PCM1702U-K/2K | PCM1702U-K/2KE6 | PCM1702U/2KE6 | PCM1702U |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC |
| Converter Type | Stereo audio DAC | Stereo audio DAC | Stereo audio DAC | Stereo audio DAC | Stereo audio DAC |
| Resolution | 20 bit | 20 bit | 20 bit | 20 bit | 20 bit |
| Sampling Rate | 44.1 kHz | 44.1 kHz | 44.1 kHz | 44.1 kHz | 44.1 kHz |
| Number of Channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Digital Interface | Serial | Serial | Serial | Serial | Serial |
| Analog Supply | +/-5 V | +/-5 V | +/-5 V | +/-5 V | +/-5 V |
| Full-Scale Distortion | -96 dB typical | -96 dB typical for PCM1702 family | -96 dB typical for PCM1702 family | -96 dB typical for PCM1702 family | -96 dB typical for PCM1702 family |
| Signal-to-Noise Ratio | 120 dB typical, A-weighted | 120 dB typical, A-weighted for PCM1702 family | 120 dB typical, A-weighted for PCM1702 family | 120 dB typical, A-weighted for PCM1702 family | 120 dB typical, A-weighted for PCM1702 family |
| Architecture | Advanced sign-magnitude BiCMOS | Advanced sign-magnitude BiCMOS | Advanced sign-magnitude BiCMOS | Advanced sign-magnitude BiCMOS | Advanced sign-magnitude BiCMOS |
Bảo phân biệt quan trọng
- Purpose-built 44.1 kHz stereo conversion (vsPCM1702U-K/2K)
- Advanced sign-magnitude operation (vsPCM1702U)
- Direct serial-interface reuse (vsPCM1704U-J/2K)
Ghi chú thiết kế
Use the manufacturer PCM1702 datasheet as the authority for the complete 20-pin assignment and recommended decoupling arrangement. Place input and output bypass capacitors directly at the relevant device pins, keep the analog output traces short, and separate the analog and digital return paths as far as practical. The bipolar output architecture makes grounding and supply return impedance especially important to channel balance and noise performance.
Route the serial clock, data, and control signals away from the analog outputs and reconstruction filter. These signals are low frequency at 44.1 kHz, but their edges can contain high-frequency harmonics capable of coupling into a high-impedance analog path. Use a continuous ground reference, avoid splitting the analog return beneath the converter, and follow the manufacturer application schematic for the output-filter topology and component values.
Provide clean +5 V and -5 V analog rails with the decoupling required by the manufacturer datasheet. Estimated analog power: the two 5 V rails at 10 V total combined with a combined current of 0.02 A would imply approximately 0.2 W; this is an illustrative calculation, not a datasheet specification. Confirm actual supply currents for the operating mode and grade before sizing regulators or thermal provisions.
Do not treat PCM1702U, PCM1702U/2K, PCM1702U-K/2K, and the /2KE6 ordering codes as automatically interchangeable. Check the complete ordering suffix, grade, temperature range, lifecycle status, package orientation, and pin functions in the manufacturer documentation. Also avoid substituting a modern PCM179x device as a drop-in part, since higher resolution and different interface or package requirements can require board changes.
Thông tin tuân thủ
Compliance declarations and automotive qualification were not established by the manufacturer extracts. The AEC-Q100 field is not applicable because no automotive qualification was identified for this audio converter.