Texas Instruments

PCM1702U/2K - 20-Bit Stereo Audio DAC | Texas Instruments

MPN: PCM1702U/2K ✗ סוף ייצור
+/-5 V Vdss 20-pin SOIC, 5.30 mm nominal body width Package
כמות הזמנה מינימלית: 1 |

PCM1702U/2K סקירה

The Texas Instruments PCM1702U/2K is a precision 20-bit stereo digital-to-analog converter with a maximum sampling rate of 44.1 kHz, a serial digital interface, and dual analog outputs in a 20-pin SOIC package. The converter uses BiCMOS circuitry and an advanced sign-magnitude architecture to suppress unwanted glitches and nonlinear distortion around bipolar zero.

An audio DAC is a data converter that accepts digital audio samples and generates proportional analog voltages or currents suitable for audio amplification. In the signal-chain hierarchy, the PCM1702 belongs to the digital-to-analog converter class, the broader ADC/DAC category, and ultimately the semiconductor and audio-signal-conversion markets. It is intended for designs requiring precise conversion of CD-audio-format data into left and right analog channels.

Key characteristics include 20-bit resolution, 44.1 kHz sampling support, dual-channel operation, a serial interface, and low-power bipolar analog output stages. According to the manufacturer datasheet, full-scale distortion is typically -96 dB and signal-to-noise ratio is typically 120 dB when measured with the A-weighted method. The sign-magnitude architecture improves behavior near zero, while the short 0.2 microsecond settling time supports accurate reconstruction of sampled audio waveforms.

The PCM1702 family provides separate analog, digital, and ground connections that support careful partitioning of sensitive signal paths. Its serial input reduces the number of data connections compared with a parallel interface, simplifying routing on a compact audio board. Because this is a bipolar-output converter, the associated output stage and analog supply design materially influence channel balance, noise, and achievable distortion performance.

Typical applications include CD player and digital-audio transport boards, high-fidelity stereo DAC products, professional audio equipment, and digital mixers requiring a dedicated 20-bit stereo conversion stage. It can also be used in instrumentation or communications equipment when its specified 44.1 kHz rate and low-noise bipolar output are appropriate.

The primary design consideration is analog supply and output conditioning. Follow the manufacturer datasheet for decoupling, output filtering, grounding, and component selection around the DAC pins. Treat the converter and its analog output path as a high-accuracy measurement chain rather than as a generic logic output.

This product page combines the converter's principal electrical characteristics, verified package information, family drop-in options, comparison parameters, and practical application guidance. It is intended to help engineers evaluate the PCM1702U/2K for legacy and new high-fidelity audio designs.

חלופות תחליף ישיר עבור PCM1702U/2K — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם PCM1702U/2K (אותו גורם צורה וטביעת רגל) — שונים ב Converter Type, Package, Signal-to-Noise Ratio.

Texas Instruments
Converter Type: Audio digital-to-analog converter
Package: SOIC-20 (20-SO)
Signal-to-Noise Ratio: 120 dB typ A-weighted

PCM1702U-K/2K

✅ Drop-In
📦 20-pin SOIC
Related PCM1702 grade and ordering suffix; resolution remains 20 bit, sampling rate remains 44.1 kHz, and channel count remains 2, with temperature-grade differences requiring datasheet verification.

📋 חלופה להתייחסות (לא בקטלוג)

PCM1702U-K/2KE6

✅ Drop-In
📦 20-pin SOIC
Related PCM1702 ordering suffix in the same 20-pin SOIC family; 20-bit resolution and 44.1 kHz dual-channel operation are retained, while environmental qualification details may differ.

📋 חלופה להתייחסות (לא בקטלוג)

PCM1702U/2KE6

✅ Drop-In
📦 20-pin SOIC
Related /2KE6 PCM1702 ordering variant in the same 20-pin SOIC family; key conversion ratings remain 20 bit, 44.1 kHz, and 2 channels, with suffix-specific qualification to be confirmed.

📋 חלופה להתייחסות (לא בקטלוג)

PCM1702U

✅ Drop-In
Texas Instruments
📦 20-pin SOIC
Audio digital-to-analog converter · 20 bit · 44.1 kHz · Advanced sign-magnitude BiCMOS · -96 dB typ at full-scale output · None required · 120 dB typ A-weighted · Industry-standard serial

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

PCM1702U/2K דירוגים מרביים ומאפיינים חשמליים

Converter Type Stereo audio digital-to-analog converter
רזולוציה 20 bit
קצב דגימה 44.1 kHz
Number of Channels 2 channels
Digital Interface Serial
Architecture Advanced sign-magnitude BiCMOS
Full-Scale Distortion -96 dB typical
Signal-to-Noise Ratio 120 dB typical, A-weighted
Settling Time 0.2 microseconds
Analog Supply Voltage +/-5 V
מארז 20-pin SOIC, 5.30 mm nominal body width
סוג הרכבה Surface mount
Package Code PDSO20
תצורת מוצא Dual-channel bipolar analog output

מדריך תצורת פינים של PCM1702U/2K pdso20

תצורת פינים עבור PCM1702U/2K (מארזת pdso20). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת pdso20 עבור PCM1702U/2K

אין נתוני פריסת פינים מפורטים עבור PCM1702U/2K.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

PCM1702U/2K מתאים עבור 6 יישוםs: High-Fidelity CD Player, Digital Audio Transport, Professional Stereo Monitoring, Digital Mixer Audio Output Stage, Hi-Fi Stereo DAC, Digital Audio Test and Measurement.

🎧

High-Fidelity CD Player

The PCM1702U/2K fits a CD-player reconstruction stage because it supports 44.1 kHz serial audio at 20-bit resolution and provides two analog output channels for stereo playback. According to the Texas Instruments PCM1702 datasheet, its advanced sign-magnitude architecture reduces unwanted glitches and nonlinear behavior around bipolar zero, while typical full-scale distortion is -96 dB. A practical implementation places the converter between the recovered digital-audio stream and the analog output filter, using the dual ±5 V analog supplies specified for its bipolar architecture. The resulting design benefits from a straightforward 44.1 kHz signal path without a parallel data bus. Board-level success still depends on compliant clocking, clean grounding, correct output-network values, and separation of sensitive analog traces from digital switching nodes.

🔧

Digital Audio Transport

PCM1702U/2K is suitable for a digital audio transport that receives a 44.1 kHz serial stream and requires local analog conversion for monitoring or line-level output. Its 20-bit resolution preserves the source word length, and the dual-channel output supports the left and right signals without separate converters. The manufacturer's typical 120 dB A-weighted SNR and -96 dB full-scale distortion provide useful baselines for a low-noise transport output stage. Install the DAC close to the output connector and analog amplifier, keep the serial clock route away from the output network, and use the datasheet-recommended bypass and filtering arrangements. The converter's serial interface reduces board routing compared with a parallel DAC, which is helpful when the transport must fit a compact enclosure while maintaining short, controlled analog paths.

🎚️

Professional Stereo Monitoring

The PCM1702U/2K can serve as the conversion element in a professional stereo monitoring path that operates at 44.1 kHz and emphasizes low distortion near signal zero. Its advanced sign-magnitude architecture is particularly relevant to audio waveforms that cross bipolar zero repeatedly, while the typical 120 dB A-weighted SNR supports a low-noise monitoring baseline. Place the device between the digital audio processor and the balanced or unbalanced line-output stage, and treat the analog supply, grounding, and output filters as part of the converter's accuracy budget. The 20-pin SOIC footprint is compatible with automated surface-mount assembly. Although the 44.1 kHz rate is appropriate for CD-derived material, a professional installation requiring higher-rate multichannel or higher-resolution conversion should evaluate a modern audio DAC family instead.

🎛️

Digital Mixer Audio Output Stage

PCM1702U/2K is applicable to a digital mixer requiring a dedicated 20-bit stereo analog-output converter for a 44.1 kHz internal bus. Its dual-channel architecture reduces the component count compared with two single-channel converters, while the serial interface supports compact digital routing. The manufacturer's typical -96 dB full-scale distortion is suitable for reducing signal-level degradation in a mixer output path, and the 120 dB A-weighted SNR helps preserve quiet program material. Connect the converter output to the mixer's line-output driver, use low-noise ±5 V analog rails, and isolate clock and data routing from the sensitive output section. Because the device supports only one listed sampling rate, the digital mixer must provide appropriate clocking and format compatibility rather than expecting arbitrary-rate resampling from this component.

🎵

Hi-Fi Stereo DAC

PCM1702U/2K aligns with a dedicated hi-fi stereo DAC architecture requiring an authentic 44.1 kHz conversion path and 20-bit word length. The advanced sign-magnitude architecture targets glitch and nonlinearity behavior around zero, while the specified typical distortion of -96 dB and A-weighted SNR of 120 dB provide useful performance figures when designing the analog output chain. Use the serial interface to accept data from a digital source or transport, then follow the manufacturer application guidance for the analog output network and supply bypass. Because the converter produces bipolar outputs from dual ±5 V rails, output coupling and balancing considerations differ from a single-supply DAC design. Keep the converter, output filter, and connector path physically compact so that the intended low-noise performance is not degraded by long traces or shared noisy return paths.

📟

Digital Audio Test and Measurement

PCM1702U/2K can be used in a compact digital-audio test instrument that generates or reconstructs 44.1 kHz stereo waveforms. Its 20-bit resolution supports two-channel digital synthesis or analysis, and the manufacturer reports a typical 0.2 microsecond settling time, which is useful for characterizing the complete output path. Use it as the final conversion stage between digital test-vector generation and an analog measurement instrument. Its low typical distortion provides a meaningful baseline when evaluating output filters, coupling networks, and balanced-output stages. The test board should include datasheet-compliant bypass capacitors and controlled grounding, because supply and return impedances can influence measured noise. Because this converter is limited to the listed 44.1 kHz rate, test vectors at other frequencies require clocking and filtering plans that remain within the device's operating limits.

סיכום מוצרים מומלצים

PCM1702U-K/2K Related stereo DAC family member בשימוש ב-: High-Fidelity CD Player, Digital Audio Transport, Professional Stereo Monitoring, Digital Mixer Audio Output Stage, Hi-Fi Stereo DAC PCM1704U-J/2K Related Texas Instruments audio DAC family בשימוש ב-: High-Fidelity CD Player, Professional Stereo Monitoring, Hi-Fi Stereo DAC PCM1702U-K/2KE6 Same-family stereo conversion option בשימוש ב-: Digital Audio Transport, Digital Audio Test and Measurement PCM1702U/2KE6 Related dual-channel DAC ordering option בשימוש ב-: Digital Mixer Audio Output Stage PCM1702U Texas Instruments בשימוש ב-: Digital Audio Test and Measurement
What are the key specifications of PCM1702U/2K that engineers should know?
The PCM1702U/2K is a 20-bit, dual-channel audio DAC supporting sampling rates up to 44.1 kHz with a serial digital interface. According to the Texas Instruments PCM1702 manufacturer datasheet, it uses advanced sign-magnitude BiCMOS circuitry, provides typical full-scale distortion of -96 dB, and achieves typical A-weighted signal-to-noise ratio of 120 dB. It is packaged in a 20-pin SOIC and operates from dual ±5 V analog supplies.
What is the operating voltage of PCM1702U/2K?
The PCM1702U/2K uses dual ±5 V analog power supplies for its bipolar output architecture. The manufacturer PCM1702 datasheet identifies the converter as a bipolar-output device, and a product listing also describes the PCM1702U/2K as operating on dual ±5 V supplies. The digital-interface supply requirement and all power-decoupling details should be confirmed in the pin-description and recommended-application sections of the manufacturer datasheet.
Where can I download the PCM1702U/2K datasheet PDF?
The PCM1702U/2K datasheet PDF is available through the Texas Instruments PCM1702 datasheet link on this page and through the mirrored manufacturer PDF listed in the technical sources. The document describes the 20-bit dual-channel converter, advanced sign-magnitude architecture, typical -96 dB full-scale distortion, 120 dB typical A-weighted signal-to-noise ratio, electrical characteristics, and application information.
Where can I find the PCM1702U/2K pinout and package dimensions?
The PCM1702U/2K uses a 20-pin SOIC package, and its complete pin assignments and mechanical drawing are shown in the manufacturer PCM1702 datasheet. Use the pin-description table to identify the serial data, clock, control, analog-output, supply, and ground connections. The package body width is listed as approximately 5.30 mm, with gull-wing surface-mount leads.
What is the PCM1702U/2K used for in audio equipment?
The PCM1702U/2K converts 20-bit digital audio data into two analog audio channels for CD players, digital transports, high-fidelity DAC products, professional audio equipment, and digital mixers. Its 44.1 kHz sampling rate directly supports CD-format audio, while the 20-bit resolution, -96 dB typical full-scale distortion, and 120 dB typical A-weighted SNR target low-noise stereo reconstruction.
PCM1702U/2K vs PCM1702U-K/2K: which one should I choose?
PCM1702U/2K and PCM1702U-K/2K belong to the same PCM1702 20-bit dual-channel DAC family and use the same 20-pin SOIC format. Their shared architecture supports 44.1 kHz serial audio and advanced sign-magnitude operation. Selection should be based on the exact grade, temperature coverage, qualification, and ordering suffix documented for the intended production environment rather than on the digital conversion format alone.
When should I choose PCM1702U/2K over a modern audio DAC?
Choose the PCM1702U/2K when preserving an existing 20-pin SOIC design, using 44.1 kHz serial audio, or retaining its established bipolar-output stage is more important than adopting a newer resolution or interface. For a new design requiring higher bit depth, wider sampling-rate support, smaller packaging, or a different digital audio format, a modern DAC may offer a better long-term platform.
Is PCM1702U/2K suitable for a CD player or digital audio transport?
Yes, PCM1702U/2K is suitable for CD-player and digital-transport designs that operate at up to 44.1 kHz with a 20-bit serial stream. Its dual-channel analog outputs, 20-bit resolution, 44.1 kHz support, and low typical distortion suit high-fidelity stereo conversion. The surrounding clock, de-emphasis, output-filter, and analog-supply circuitry must be designed according to the manufacturer datasheet.
What can replace PCM1702U/2K without changing the PCB footprint?
The closest documented drop-in family options are PCM1702U-K/2K, PCM1702U-K/2KE6, PCM1702U/2KE6, and PCM1702U, all associated with the PCM1702 20-pin SOIC family in the cross-reference results. Before substitution, verify pin functions, temperature grade, lifecycle status, supply requirements, and electrical limits for the exact ordered suffix. A modern PCM179x-family device generally requires redesign rather than a true drop-in replacement.
Is PCM1702U-K/2K the same as PCM1702U/2K?
PCM1702U-K/2K is a closely related ordering variant of the same Texas Instruments PCM1702 precision 20-bit DAC family. Both product records identify a dual-channel, 44.1 kHz serial converter in a 20-pin SOIC package. They should not be treated as electrically identical without checking the orderable drawing and datasheet suffix because grade and environmental requirements may differ.
What is the best cross-brand equivalent for PCM1702U/2K?
No cross-brand drop-in equivalent was established for the PCM1702U/2K. The verified cross-reference material identifies only related Texas Instruments family members, while an audio-converter replacement discussion states that no pin-to-pin-compatible alternatives are available for a related PCM1704U design. A different manufacturer would therefore be a functional migration requiring footprint, interface, supply, and analog-output verification rather than a guaranteed drop-in substitution.
Where to buy PCM1702U/2K online?
Use the Request a Quote form on this page to request PCM1702U/2K availability, order quantities, and current delivery information. Because the exact suffix combines the PCM1702U device with the /2K ordering code, attach the complete MPN to the request. The form is the appropriate route for confirming lot availability, packaging details, and lead time without relying on an incomplete distributor catalog record.
What is the price of PCM1702U/2K?
The current PCM1702U/2K commercial price is not published as a static figure on this page. Submit the exact MPN through the Request a Quote form on this page for current pricing, quantity breaks, stock status, and lead time. The part is an older NRND-family component, so package, suffix, quantity, and supply continuity should be confirmed with the quote rather than inferred from another PCM1702 ordering code.
What is the lead time for PCM1702U/2K?
The current lead time for PCM1702U/2K should be confirmed through the Request a Quote form on this page. Lead time can vary with exact suffix, order quantity, package form, and remaining factory inventory. Request the complete PCM1702U/2K MPN and quantity when seeking a delivery commitment, and verify any date-sensitive production plan directly in the quotation response.
Is PCM1702U/2K in stock?
PCM1702U/2K inventory must be checked for the exact ordering suffix through the Request a Quote form on this page. A listing that states an order can ship does not prove that every quantity and package form is immediately available. The quotation response should confirm stock, minimum order quantity, lot traceability, and the expected delivery schedule.
What are the power and thermal considerations for PCM1702U/2K?
The primary electrical design issue is the dual ±5 V analog supply arrangement required by the PCM1702U/2K's bipolar outputs, rather than heat generated by a high-current power stage. Follow the manufacturer datasheet for supply decoupling, ground partitioning, and output-network values. Keep sensitive analog traces short and isolated from digital clock routing to preserve the converter's low-noise and low-distortion performance.
Does PCM1702U/2K support RoHS, REACH, or AEC-Q100 qualification?
RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status cannot be confirmed from the available manufacturer and distributor extracts, so each remains unknown. The PCM1702U/2K is an audio converter rather than an explicitly automotive-qualified device in these records. Request the current manufacturer compliance and material-declaration documents for the exact ordered part before using it in a regulated production design.

נתוני עזר הנדסיים עבור PCM1702U/2K — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose PCM1702U/2K when maintaining or reproducing a design that specifically calls for a 20-bit, dual-channel, 44.1 kHz serial audio DAC in a 20-pin SOIC package. Its advanced sign-magnitude architecture, typical -96 dB full-scale distortion, and typical 120 dB A-weighted SNR suit CD-derived stereo audio, digital transports, professional monitoring, and legacy hi-fi DAC products. PCM1702U-K/2K, PCM1702U-K/2KE6, and PCM1702U/2KE6 are the closest family options, but their grade, qualification, temperature, and ordering details must be checked before substitution. PCM1702U is another closely related ordering variant rather than a modern feature upgrade. For a new design needing greater than 44.1 kHz sampling, more than 20-bit resolution, smaller packaging, or a different digital interface, select a current DAC family and allow for PCB, supply, and output-stage redesign.

השוואה עם חלופות

פרמטר מוצר זה PCM1702U-K/2K PCM1702U-K/2KE6 PCM1702U/2KE6 PCM1702U
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 20-pin SOIC 20-pin SOIC 20-pin SOIC 20-pin SOIC 20-pin SOIC
Converter Type Stereo audio DAC Stereo audio DAC Stereo audio DAC Stereo audio DAC Stereo audio DAC
Resolution 20 bit 20 bit 20 bit 20 bit 20 bit
Sampling Rate 44.1 kHz 44.1 kHz 44.1 kHz 44.1 kHz 44.1 kHz
Number of Channels 2 channels 2 channels 2 channels 2 channels 2 channels
Digital Interface Serial Serial Serial Serial Serial
Analog Supply +/-5 V +/-5 V +/-5 V +/-5 V +/-5 V
Full-Scale Distortion -96 dB typical -96 dB typical for PCM1702 family -96 dB typical for PCM1702 family -96 dB typical for PCM1702 family -96 dB typical for PCM1702 family
Signal-to-Noise Ratio 120 dB typical, A-weighted 120 dB typical, A-weighted for PCM1702 family 120 dB typical, A-weighted for PCM1702 family 120 dB typical, A-weighted for PCM1702 family 120 dB typical, A-weighted for PCM1702 family
Architecture Advanced sign-magnitude BiCMOS Advanced sign-magnitude BiCMOS Advanced sign-magnitude BiCMOS Advanced sign-magnitude BiCMOS Advanced sign-magnitude BiCMOS

מבדילים עיקריים

  • Purpose-built 44.1 kHz stereo conversion (לעומתPCM1702U-K/2K)
  • Advanced sign-magnitude operation (לעומתPCM1702U)
  • Direct serial-interface reuse (לעומתPCM1704U-J/2K)

הערות תכנון

Use the manufacturer PCM1702 datasheet as the authority for the complete 20-pin assignment and recommended decoupling arrangement. Place input and output bypass capacitors directly at the relevant device pins, keep the analog output traces short, and separate the analog and digital return paths as far as practical. The bipolar output architecture makes grounding and supply return impedance especially important to channel balance and noise performance.

Route the serial clock, data, and control signals away from the analog outputs and reconstruction filter. These signals are low frequency at 44.1 kHz, but their edges can contain high-frequency harmonics capable of coupling into a high-impedance analog path. Use a continuous ground reference, avoid splitting the analog return beneath the converter, and follow the manufacturer application schematic for the output-filter topology and component values.

Provide clean +5 V and -5 V analog rails with the decoupling required by the manufacturer datasheet. Estimated analog power: the two 5 V rails at 10 V total combined with a combined current of 0.02 A would imply approximately 0.2 W; this is an illustrative calculation, not a datasheet specification. Confirm actual supply currents for the operating mode and grade before sizing regulators or thermal provisions.

Do not treat PCM1702U, PCM1702U/2K, PCM1702U-K/2K, and the /2KE6 ordering codes as automatically interchangeable. Check the complete ordering suffix, grade, temperature range, lifecycle status, package orientation, and pin functions in the manufacturer documentation. Also avoid substituting a modern PCM179x device as a drop-in part, since higher resolution and different interface or package requirements can require board changes.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

Compliance declarations and automotive qualification were not established by the manufacturer extracts. The AEC-Q100 field is not applicable because no automotive qualification was identified for this audio converter.

הנתונים אומתו בתאריך: 2026-11-15 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

pcm1702u datasheet PCM1702U/2K datasheet PDF PCM1702U/2K pinout PCM1702U/2K specifications PCM1702U/2K equivalent PCM1702U/2K replacement PCM1702U/2K drop-in substitute PCM1702U/2K vs PCM1702U-K/2K PCM1702U/2K 20-pin SOIC PCM1702U/2K audio DAC PCM1702U/2K CD player DAC PCM1702U/2K price PCM1702U/2K stock Texas Instruments PCM1702U/2K

רכיבים ומונחים קשורים

Texas Instruments PCM1702U/2K PCM1702U-K/2K PCM1702U-K/2KE6 PCM1702U/2KE6 PCM1702U PCM1704U-J/2K PCM179x digital-to-analog converter DAC audio DAC stereo converter BiCMOS advanced sign-magnitude architecture 20-bit resolution 44.1 kHz sampling rate serial audio interface bipolar analog output dual-channel output full-scale distortion signal-to-noise ratio A-weighted SNR settling time 20-pin SOIC CD audio RoHS REACH AEC-Q100
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר