PIC16F724-E/MV - 8-Bit 20MHz 7KB MCU | Microchip
MPN: PIC16F724-E/MV ✓ 啟用中PIC16F724-E/MV 概覽
A microcontroller is a programmable semiconductor that integrates a CPU, memory, peripherals, and input/output interfaces onto one device. The PIC16F724 belongs to the PIC16 family, which combines an 8-bit RISC architecture with flash memory and low-power peripherals. The -E/MV ordering suffix identifies the extended-temperature automotive grade in the 40-pin UFQFN package. In the power-management hierarchy, this device is a compact embedded controller rather than a discrete logic component.
Program memory is organized as 4K x 14 words, providing 7 KB of flash for application code, while 192 bytes of RAM support working variables and stack-related operations. The 20 MHz maximum clock gives designers additional timing margin for control loops, communications, and peripheral servicing compared with lower-clock PIC16 devices. The PIC XLP nanoWatt technology supports low-power operating strategies for battery-powered and intermittently powered products.
The PIC16F724-E/MV integrates application-oriented peripherals into a small 40-pin surface-mount footprint. Its architecture is suitable for motor and industrial control, instrumentation, consumer interfaces, embedded sensing, and low-power embedded systems. Because the MCU operates from a compact UFQFN package, PCB land-pattern accuracy, exposed-pad soldering, and thermal management are central to a reliable assembly.
PIC16F724-E/MV applications include small motor controllers, digital thermometers, environmental monitoring nodes, industrial keypads, and compact battery-powered instruments. In these systems, the MCU can coordinate sensor readings, control outputs, implement communication protocols, and enter low-power states between activities. Firmware selection should remain within the device's documented memory, electrical, and peripheral limits.
For layout, follow the package drawing and pin-description table in the manufacturer datasheet rather than assigning functions from a generic 40-pin diagram. Place decoupling capacitors close to the supply pins, provide a clean ground return, and solder the exposed thermal pad using the manufacturer's land pattern and assembly process. Verify the final operating voltage, clock configuration, and peripheral assignments against the exact device variant.
This product page combines manufacturer information with package-specific sourcing guidance, practical PCB considerations, direct replacement criteria, and application-oriented design context. It helps engineers distinguish an exact same-package replacement from merely similar PIC microcontrollers before committing to a PCB or firmware change.
直接替換替代品,適用於 PIC16F724-E/MV — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: PIC16F724-E/MV (相同外形與佔位) — 差異在於 Package.
PIC16F724-I/MV
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →PIC16F724-E/MV 最大額定值與電氣特性
| CPU Architecture | 8-bit RISC |
| Maximum CPU Frequency | 20 MHz |
| Program Memory | 7 KB flash (4K x 14 words) |
| RAM | 192 bytes |
| Architecture Family | PIC16 8-bit microcontroller |
| Low-Power Technology | nanoWatt XLP |
| Operating Supply | 3.3 V |
| Temperature Grade | Automotive grade (-E) |
| 封裝 | 40-pin UFQFN with exposed pad |
| 腳位數 | 40 pins |
| 安裝類型 | Surface mount |
| Device Type | Flash-based 8-bit microcontroller |
| Program Memory Type | Flash |
PIC16F724-E/MV 40-pin ufqfn with exposed pad 腳位配置指南
PIC16F724-E/MV(40-pin ufqfn with exposed pad 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: PIC16F724-E/MV.
請參閱 資料表 以查看完整腳位配置。
典型應用
PIC16F724-E/MV 適用於 6 應用s: Compact Motor Control, Battery-Powered Sensor Node, Industrial Data Acquisition, Digital Thermometer and Monitor, Automotive Accessory Controller, Battery Charger and Power Control.
Compact Motor Control
PIC16F724-E/MV fits compact motor-control modules because its 8-bit core operates at up to 20 MHz and the PIC16F724 family includes the resources needed to coordinate inputs, timers, and control outputs. The 7 KB Flash and 192 bytes of RAM are suited to compact control firmware, while the 40-pin UFQFN preserves routing flexibility on a space-constrained board. Place the MCU close to the motor-driver interface, keep switching-node returns out of sensitive ground paths, and follow the exact 40-pin land pattern. Verify current limits, thermal margins, and timing against the selected motor-driver circuitry.
推薦
Battery-Powered Sensor Node
PIC16F724-E/MV is appropriate for a battery-powered environmental sensor because the PIC XLP nanoWatt family supports low-power operating modes and the microcontroller integrates control, Flash, RAM, and peripherals in one compact device. Its 20 MHz maximum clock allows time-critical sampling and communication handling without moving to a larger processor. Use the documented low-power peripherals and oscillator options to establish a practical duty cycle, place the MCU near the sensor interface, and keep decoupling current paths short. Confirm the regulator dropout, sleep current, and sensor warm-up behavior across the complete battery-voltage range.
推薦
Industrial Data Acquisition
PIC16F724-E/MV can serve as the supervisory controller in a compact industrial data-acquisition module. Its 20 MHz maximum clock supports polling and communication routines, and 7 KB of Flash is suitable for calibration logic, status handling, and protocol processing. The 192-byte RAM budget should be checked against buffered samples and protocol overhead before firmware allocation. Connect analog measurement channels through a dedicated ADC interface rather than relying on undefined MCU pins, and isolate high-energy input circuitry from the compact UFQFN footprint. Validate watchdog behavior, brownout response, and recovery requirements during fault testing.
推薦
Digital Thermometer and Monitor
PIC16F724-E/MV is suitable for a digital thermometer or environmental monitor that must combine measurement, local display control, and low-power standby behavior. The 4K x 14-word Flash organization supports application code and calibration tables, while the 20 MHz clock provides adequate timing for sensor conversion sequencing and display updates. Use serial peripherals for a remote display or digital sensor where appropriate, and route the LCD or LED interface away from high-current drive paths. Keep the sensor input conditioned, maintain a defined ground reference, and account for self-heating when the MCU and regulator operate in a sealed enclosure.
推薦
Automotive Accessory Controller
PIC16F724-E/MV fits compact automotive accessory and body-control modules because the -E/MV ordering code denotes the automotive extended temperature grade and the manufacturer identifies the PIC16F724 family for recommended automotive design use. The 40-pin UFQFN supports access to the device's I/O resources while limiting board area, and the 7 KB Flash is adequate for compact control logic. Confirm the final system qualification, transient requirements, and applicable automotive component assessment before production. Decouple supply pins locally, maintain low-resistance ground paths, and isolate loads from sensitive MCU traces.
推薦
Battery Charger and Power Control
PIC16F724-E/MV can coordinate a small charger or power-control subsystem where firmware must supervise voltage, current, timing, and state transitions. Its 20 MHz maximum clock supports timely control-loop execution, and the 7 KB Flash can hold state machines, calibration, and fault handling. Place analog sensing paths away from switching nodes, use the exposed pad according to the package thermal design, and provide stable local decoupling. Verify that the MCU, analog front end, and power stage all remain within the same voltage and temperature limits. Do not use firmware as the sole protection for overcurrent or overvoltage faults.
推薦
推薦產品摘要
工程參考資料,適用於 PIC16F724-E/MV — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PIC16F724-I/MV |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 40-pin UFQFN with exposed pad | 40-pin UFQFN with exposed pad |
| CPU Architecture | 8-bit RISC | 8-bit RISC |
| Maximum CPU Frequency | 20 MHz | 20 MHz |
| Program Memory | 7 KB flash (4K x 14 words) | 7 KB flash (4K x 14 words) |
| RAM | 192 bytes | 192 bytes |
| Temperature Grade | Automotive extended (-E) | Industrial extended (-I) |
| Low-Power Technology | nanoWatt XLP | nanoWatt XLP |
| Supply | 3.3 V | 3.3 V |
| Number of Terminals | 40 pins | 40 pins |
主要差異化特點
- Maintains the automotive extended temperature grade (對比PIC16F724-I/MV)
- Same 40-pin UFQFN footprint as the direct family alternative (對比PIC16F724-I/MV)
- Compact 8-bit control with 4K x 14-word Flash organization (對比PIC16F724-E/P)
設計說明
Use the exact 40-pin UFQFN land pattern from the Microchip package drawing, including the exposed thermal pad. Place input and output decoupling capacitors adjacent to their associated supply pins, connect the exposed pad to the appropriate ground plane, and avoid placing high-current return paths across the MCU's local ground reference. The small terminal pitch makes paste volume and solder inspection especially important during prototype assembly.
The exposed pad is the principal path for heat transfer from the 40-pin UFQFN device. Provide an uninterrupted ground or thermal-pad connection and use the manufacturer's recommended solder-paste and reflow profile. Confirm that copper area and surrounding components preserve thermal flow. For sustained processing or high ambient temperature, estimate junction temperature using actual supply voltage, clock activity, and measured device dissipation before applying the package thermal rating.
Separate sensitive analog inputs and external communication interfaces from motor, relay, and switching-converter traces. Keep the 3.3 V supply path short, add local high-frequency bypass capacitance at the MCU pins, and validate brownout behavior during startup and load transitions. If the MCU controls power-stage devices, include hardware shutdown paths so that a firmware fault cannot defeat current or voltage protection.
合規資訊
The automotive extended temperature suffix is confirmed, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is present in the manufacturer product information or distributor records.