PIC24FJ64GA308-I/PT - 32MHz 16-Bit XLP MCU | Microchip
MPN: PIC24FJ64GA308-I/PT ✓ 啟用中PIC24FJ64GA308-I/PT 概覽
A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals in one integrated circuit. The PIC24F family belongs to the broader embedded-controller hierarchy, where a general-purpose MCU executes firmware, reads sensors, controls outputs, and manages communication interfaces. Compared with a discrete processor design, an integrated MCU reduces board area, component count, power consumption, and software-driver complexity while providing deterministic peripheral access.
The PIC24FJ64GA308-I/PT operates at up to 16 MIPS and includes 64 KB of Flash memory organized as 22K x 24. Its 8 KB RAM supports working data, buffers, stack space, and display-related operations. The 69 available I/O pins give a board designer substantial connectivity for digital signals, while the integrated LCD controller is suited to segmented or graphical display systems that do not require a separate display controller.
The MCU's low-power design is central to its value in embedded products. Microchip describes the device as using nanoWatt XLP technology, and the PIC24FJ64GA308 family supports a Low Voltage Sleep mode that preserves device state and RAM while drawing a typical 340 nA. The Vbat connection allows selected functions and retained memory to remain associated with a backup source when the primary supply is removed, depending on the application and board implementation.
Typical applications include battery-operated instrumentation, compact industrial controllers, data loggers, low-power sensor nodes, human-machine-interface panels, and embedded systems that combine LCD feedback with general digital control. The 80-pin TQFP package provides generous I/O access but requires careful PCB fanout and adequate clearance between adjacent leads.
For a new design, use the manufacturer pin-description and pinout tables to assign every package lead and verify the PCB footprint against the 80-pin TQFP drawing. Preserve the required decoupling structure, route sensitive analog inputs away from fast-switching nodes, and confirm startup, sleep, and Vbat behavior under the intended supply conditions.
This page consolidates the confirmed device characteristics, package details, application guidance, and same-family replacement considerations into an engineering-focused resource. It also identifies parameters that require confirmation from the manufacturer documentation before schematic release or production qualification.
直接替換替代品,適用於 PIC24FJ64GA308-I/PT — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: PIC24FJ64GA308-I/PT (相同外形與佔位) — 差異在於 Package, RoHS Status, ADC, Core, I/O Pins.
PIC24FJ64GA306-I/PT
✅ 直接替換聯絡詢價
查看資料表 →PIC24FJ64GA704-I/PT
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →PIC24FJ64GA308-I/PT 最大額定值與電氣特性
| Microcontroller Family | PIC24F general-purpose 16-bit Flash microcontroller |
| CPU Architecture | 16-bit |
| Maximum CPU Frequency | 32 MHz |
| Instruction Throughput | 16 MIPS |
| Flash Program Memory | 64 KB (22K x 24) |
| RAM | 8 KB |
| General-Purpose I/O | 69 pins |
| Integrated Display Support | LCD controller |
| Low-Power Technology | nanoWatt XLP |
| Low Voltage Sleep Current | 340 nA typical |
| Backup Supply | Vbat pin |
| 封裝 | 80-pin TQFP, 12 x 12 mm |
| Package Height | 1.0 mm maximum |
| 安裝類型 | Surface mount |
| Temperature Grade | Industrial grade |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
PIC24FJ64GA308-I/PT 1.0 mm maximum 腳位配置指南
PIC24FJ64GA308-I/PT(1.0 mm maximum 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: PIC24FJ64GA308-I/PT.
請參閱 資料表 以查看完整腳位配置。
典型應用
PIC24FJ64GA308-I/PT 適用於 6 應用s: Battery-Powered Data Logger, Industrial Sensor Node, LCD Human-Machine Interface, Low-Power Environmental Monitor, Compact Equipment Controller, Battery-Backed Security and Access Panel.
Battery-Powered Data Logger
PIC24FJ64GA308-I/PT fits a battery-powered data logger that periodically samples sensors and spends most of its time between active measurement bursts. The 32 MHz, 16 MIPS core provides useful control throughput, while 64 KB of Flash and 8 KB of RAM support acquisition routines, event buffering, and local configuration. Its Low Voltage Sleep mode retains device state and RAM at a typical 340 nA, helping reduce standby consumption. In operation, the firmware can wake the MCU, acquire measurements, store them, update the LCD, and return to sleep. The Vbat connection supports backup-oriented behavior, although capacitor sizing, leakage, and the permitted Vbat voltage must be checked against the final battery architecture.
推薦
Industrial Sensor Node
PIC24FJ64GA308-I/PT is appropriate for an industrial sensor node combining digital inputs, analog measurement channels, and a local operator display. Its 69 I/O pins reduce the need for external I/O expanders, while the integrated LCD controller supports compact panel feedback. The 16-bit PIC24F architecture and 16 MIPS throughput can handle sampling, filtering, threshold logic, and communication tasks in one device. For a factory environment, isolate sensitive analog routing from switching converters and relay drivers, and use the wide pin count for sensor conditioning and status signaling. The industrial-grade ordering code supports designs intended for extended industrial temperature conditions, subject to the device's documented electrical limits.
推薦
LCD Human-Machine Interface
PIC24FJ64GA308-I/PT can serve as the central controller for an LCD-based human-machine interface because it combines an integrated LCD controller with substantial I/O capacity and a 32 MHz processing core. The 64 KB Flash memory is suitable for menu logic, screen state management, input handling, and communication firmware, while 8 KB of RAM supports display buffers and transient application data. Buttons, rotary encoders, indicator lamps, and serial interface signals can be distributed across the 69 available I/O pins. Keep LCD traces away from high-current switching paths, follow the package's recommended decoupling arrangement, and verify the glass interface and timing parameters in the manufacturer documentation.
推薦
Low-Power Environmental Monitor
PIC24FJ64GA308-I/PT supports environmental monitoring products that combine periodic sensing, local status indication, and long battery life. The MCU's nanoWatt XLP architecture and 340 nA typical Low Voltage Sleep current allow the controller to remain responsive without continuously powering peripheral subsystems. Its 64 KB Flash capacity accommodates drivers and application logic, and the 8 KB RAM is useful for calibration values, recent samples, and communication buffers. Configure unused I/O pins appropriately, disable unused peripherals before sleep, and account for wake-up timing when choosing sensor sampling intervals. The Vbat feature can assist with data-retention strategies, but its interaction with the primary regulator and backup source must be designed against the datasheet limits.
推薦
Compact Equipment Controller
PIC24FJ64GA308-I/PT is well suited to compact equipment controllers that supervise several inputs and outputs while presenting local information. Its 69 I/O pins can connect limit switches, status inputs, alarm outputs, and communication peripherals without excessive multiplexing, and the integrated LCD controller simplifies compact front-panel products. The 32 MHz core gives the firmware capacity for debouncing, state-machine control, diagnostics, and event logging, while 8 KB of RAM can hold working variables and short communication buffers. Use careful power partitioning so motors, relays, and lamps do not inject transients into the MCU supply or LCD interface. The 12 x 12 mm TQFP footprint also preserves routing density compared with a larger leaded package.
推薦
Battery-Backed Security and Access Panel
PIC24FJ64GA308-I/PT can implement a battery-backed access or security panel because it combines low-power sleep operation, retained RAM, a Vbat connection, and an LCD controller. The 64 KB Flash memory can hold access-control logic, event handling, keypad scanning, and communication routines, while 69 I/O pins support keys, indicators, relays, and external sensors. During normal use, the Low Voltage Sleep mode can reduce consumption between user events; after a main-power interruption, the backup path can maintain the required controller functions within the electrical limits. Security deployments should add appropriate authentication and communication protections in firmware, and hardware validation should include power-loss timing, relay behavior, and Vbat current measurements.
推薦
推薦產品摘要
工程參考資料,適用於 PIC24FJ64GA308-I/PT — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PIC24FJ64GA306-I/PT | PIC24FJ64GA704-I/PT |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 80-pin TQFP, 12 x 12 mm | 80-pin TQFP, 12 x 12 mm | 80-pin TQFP, 12 x 12 mm |
| CPU Architecture | 16-bit | 16-bit | 16-bit |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz |
| Flash Program Memory | 64 KB (22K x 24) | 64 KB | 128 KB |
| RAM | 8 KB | 8 KB | 16 KB |
| General-Purpose I/O | 69 pins | 69 pins | 69 pins |
| Display Support | LCD controller | LCD controller | LCD controller |
| Low Voltage Sleep Current | 340 nA typical | 340 nA typical | 340 nA typical |
| Backup Supply | Vbat pin | Vbat pin | Vbat pin |
| Low-Power Technology | nanoWatt XLP | nanoWatt XLP | nanoWatt XLP |
| Temperature Grade | Industrial grade | Industrial grade | Industrial grade |
主要差異化特點
- High I/O availability for an 80-pin general-purpose MCU (對比PIC24FJ64GA306-I/PT)
- Integrated display and low-power resources (對比PIC24FJ64GA704-I/PT)
- Compact 12 x 12 mm surface-mount footprint (對比PIC24FJ64GA306-I/PT)
設計說明
Use the manufacturer land pattern and pin numbering rather than a generic 80-pin TQFP footprint. Confirm body dimensions, lead pitch, lead span, toe geometry, and any exposed thermal-pad requirements. Place the MCU close to its decoupling capacitors and keep the pin-1 orientation consistent with the assembly drawing. The 69 I/O pins leave little unused routing space, so fanout planning should begin before the schematic is finalized.
Partition the board so the MCU, LCD interface, and communication circuitry share a low-noise supply domain, while motors, relays, and high-current LEDs use separate switching paths. Follow the manufacturer's recommended input and output capacitor values, including capacitance tolerance and voltage-rating requirements. For battery designs, calculate average current from active time, sleep current, wake frequency, and peripheral leakage rather than relying on the 340 nA sleep figure alone.
Route analog, LCD, and communication signals away from switching-node copper and high-current return paths. Provide a continuous ground reference beneath signal routes where practical, and place bulk and bypass capacitance near the associated supply pins. If an external ADC, radio, or display interface is fitted, inspect its switching edges and supply requirements with an oscilloscope under the highest expected GPIO activity.
Do not infer pin compatibility from the shared 80-pin TQFP package alone. Before substituting another GA-family device, compare every multiplexed pin, interrupt input, analog channel, LCD connection, power pin, and programming interface. Also verify reset behavior, oscillator configuration, memory limits, and startup code. A footprint match can still require firmware and board-level changes.
The MCU's primary thermal concerns normally arise from switching losses rather than the 32 MHz clock alone, but board temperature still affects reliability and LCD performance. Position the controller away from regulators, relays, and large heat-generating components when the enclosure permits. Use thermal copper and verified airflow for compact industrial products, and evaluate the junction-temperature limit using the final PCB construction and maximum ambient condition.
合規資訊
The industrial temperature designation does not by itself establish AEC-Q100 qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or authorized channel documentation.