PIC32MX170F512LT-I/GJX - 50MHz 512KB Flash MCU | Microchip
MPN： PIC32MX170F512LT-I/GJX ✓ 啟用中PIC32MX170F512LT-I/GJX 概覽
A 32-bit microcontroller (MCU) is a programmable integrated circuit that executes instructions from on-chip Flash memory, featuring a 32-bit data path, multiple timers, ADC/DAC peripherals, and communication interfaces. Microcontrollers sit within the hierarchy microcontroller -> embedded processor -> semiconductor IC and form the core of nearly every modern embedded electronic product.
Key features of the PIC32MX170F512L family include 50 MHz core frequency with single-cycle multiply and divide, Peripheral Pin Select (PPS) for flexible signal assignment, two I2S and four SPI modules for audio codec interfaces, a Parallel Master Port (PMP) with dual buffers for graphics, plus USB 2.0 full-speed device/host/OTG capability. Additional peripherals include a 10-bit 1 Msps ADC, three analog comparators, Capture/Compare/PWM, RTCC, and CTMU for touch and capacitive sensing.
Technically the PIC32MX170 uses the MIPS32 M4K core with 5-stage pipeline, hardware multiply/divide, and 32 KB of prefetch cache that masks Flash latency. Its 5 V tolerant digital I/O (with proper configuration) and PPS remapping reduce PCB layout constraints and let the factory tail gate assignment migrate between board revisions. The CTMU and RTCC blocks add accurate time measurement for metering and battery-backed timekeeping applications.
Typical applications include USB audio interfaces, industrial HMI panels with TFT graphics, point-of-sale terminals, smart energy metering, and IoT edge nodes. Its combination of 512 KB Flash and 64 KB RAM supports TCP/IP stacks, USB device classes, and graphics libraries running concurrently. When designing with this device, ensure the 100-ball TFBGA land pattern uses NSMD pads with via-matchup layout and an explicit draw order of assembly checklist for proper 0.5 mm pitch BGA assembly - non-compliant BGA reflow profiles can cause head-in-pillow defects.
直接替換替代品，適用於 PIC32MX170F512LT-I/GJX — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： PIC32MX170F512LT-I/GJX （相同外形與佔位） — 差異在於 Package, ADC, SPI Modules, USB, Core Architecture.
PIC32MX570F512LT-I/GJX
✅ 直接替換聯絡詢價
查看資料表 →PIC32MX270F512LT-I/GJX
✅ 直接替換聯絡詢價
查看資料表 →PIC32MX170F512LT-50I/GJX
✅ 直接替換聯絡詢價
查看資料表 →PIC32MX150F256LT-I/GJX
✅ 直接替換聯絡詢價
查看資料表 →PIC32MX130F256LT-I/GJX
✅ 直接替換📋 參考替代品（不在目錄中）
PIC32MX170F512L-I/PT
✅ 直接替換聯絡詢價
查看資料表 →PIC32MX170F512LT-I/GJX 最大額定值與電氣特性
| Core Architecture | MIPS32 M4K |
| Core Frequency | 50 MHz (83 DMIPS) |
| Program Flash | 512 KB (512K x 8) |
| Data RAM | 64 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| 工作溫度 | -40C to +85C (Industrial) |
| I/O Pins | 85 |
| 封裝 | 100-TFBGA (7x7 mm) |
| USB | USB 2.0 Full-Speed Device/Host/OTG |
| ADC | 10-bit 1 Msps |
| Analog Comparators | 3 |
| SPI Modules | 4 |
| I2S Modules | 2 |
| I2C Modules | 2 |
| UART Modules | 6 |
| PMP (Parallel Master Port) | Yes |
| CTMU | Yes |
| RTCC | Yes |
| RoHS 狀態 | Compliant |
PIC32MX170F512LT-I/GJX 100-tfbga (7x7 mm) 腳位配置指南
PIC32MX170F512LT-I/GJX（100-tfbga (7x7 mm) 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： PIC32MX170F512LT-I/GJX.
請參閱 資料表 以查看完整腳位配置。
典型應用
PIC32MX170F512LT-I/GJX 適用於 6 應用s: USB Audio Interface, Industrial HMI with TFT Graphics, Point-of-Sale Terminal, Smart Energy Meter, IoT Edge Sensor Node, Medical Patient Monitor.
USB Audio Interface
The PIC32MX170F512LT-I/GJX integrates USB 2.0 Full-Speed OTG with two I2S modules, ideal for USB audio interfaces at 48 kHz/16-bit. The 50 MHz core delivers 83 DMIPS, sufficient to run the USB Audio Class 1.0 stack alongside codec drivers. With 512 KB Flash and 64 KB RAM, designers can include effect processing, while the integrated peripherals eliminate an external audio CODEC interface chip.
推薦
Industrial HMI with TFT Graphics
The Parallel Master Port (PMP) with dual read/write buffers connects directly to TFT LCD panels, while 512 KB Flash and 64 KB RAM support graphics libraries and asset bitmaps. Operating from -40C to +85C, the MCU meets factory automation temperature ranges. The Peripheral Pin Select allows flexible routing to display and touch controller interfaces, reducing PCB layer count.
推薦
Point-of-Sale Terminal
The PIC32MX170F512LT-I/GJX delivers 83 DMIPS at 50 MHz, sufficient for encryption, EMV transaction processing, and display refresh in POS terminals. Its USB OTG supports peripherals (smartcard, NFC reader, printer), while multiple UART modules connect to receipt and barcode scanners. The integrated CTMU supports capacitive key scanning for PIN entry pads without external touch controllers.
推薦
Smart Energy Meter
The 10-bit 1 Msps ADC accurately samples voltage and current sensors, while the integrated RTCC provides time-of-use billing data with backup battery. With 512 KB Flash, the MCU runs metering algorithms, calibration tables, and wireless communication stacks concurrently. The CTMU enables accurate capacitance measurement for power-quality monitoring across the industrial temperature range.
推薦
IoT Edge Sensor Node
With 85 I/O pins, the PIC32MX170F512LT-I/GJX connects to multiple sensors, while USB OTG and six UART modules enable wired and wireless gateway connectivity. The 512 KB Flash hosts TCP/IP stacks, MQTT clients, and over-the-air update bootloaders. Its 2.3 V to 3.6 V operation suits battery and solar-powered edge devices with wide input voltage ranges.
推薦
Medical Patient Monitor
The PIC32MX170F512LT-I/GJX provides deterministic real-time response for time-critical patient monitoring applications. Its 50 MHz core runs vital-sign DSP algorithms, while USB OTG enables connection to hospital information systems. With 512 KB Flash and 64 KB RAM, designers can include data logging and alarm management. The integrated RTCC timestamps events for clinical records.
推薦
推薦產品摘要
工程參考資料，適用於 PIC32MX170F512LT-I/GJX — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PIC32MX570F512LT-I/GJX | PIC32MX270F512LT-I/GJX | PIC32MX170F512LT-50I/GJX | PIC32MX150F256LT-I/GJX |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TFBGA (7x7) | 100-TFBGA (7x7) - same | 100-TFBGA (7x7) - same | 100-TFBGA (7x7) - same | 100-TFBGA (7x7) - same |
| Core Frequency | 50 MHz | 60 MHz (+20%) | 50 MHz (same) | 50 MHz (same) | 50 MHz (same) |
| Flash | 512 KB | 512 KB (same) | 512 KB (same) | 512 KB (same) | 256 KB (-50%) |
| RAM | 64 KB | 64 KB (same) | 64 KB (same) | 64 KB (same) | 32 KB (-50%) |
| ADC Resolution | 10-bit | 10-bit (same) | 12-bit (better) | 10-bit (same) | 10-bit (same) |
| USB OTG | Yes (FS) | Yes (FS) | Yes (FS) | Yes (FS) | Yes (FS) |
| Operating Voltage | 2.3 V to 3.6 V | 2.3 V to 3.6 V (same) | 2.3 V to 3.6 V (same) | 2.3 V to 3.6 V (same) | 2.3 V to 3.6 V (same) |
| Operating Temperature | -40C to +85C | -40C to +85C (same) | -40C to +85C (same) | -40C to +85C (same) | -40C to +85C (same) |
| I/O Pins | 85 | 85 (same) | 85 (same) | 85 (same) | 85 (same) |
主要差異化特點
- Higher core frequency for compute-bound designs (對比PIC32MX170F512LT-50I/GJX)
- 12-bit ADC for precision measurement (對比PIC32MX270F512LT-I/GJX)
- Full 512 KB Flash retention in same package (對比PIC32MX150F256LT-I/GJX)
設計說明
The 100-TFBGA package uses a 0.5 mm ball pitch which demands NSMD land pads with via-matchup layout per Microchip IPC-7351 footprint guidelines. Use an explicit draw order of assembly checklist for proper 0.5 mm pitch BGA assembly - non-compliant BGA reflow profiles can cause head-in-pillow defects. Plan for at least 4 PCB layers with a continuous ground plane beneath the BGA to provide thermal dissipation and reference return paths for high-speed signals.
The PIC32MX170F512LT-I/GJX operates from 2.3 V to 3.6 V across the industrial -40C to +85C range. Decouple VDD with at least one 10 uF bulk capacitor and one 100 nF ceramic capacitor per VDD pin pair, placed within 5 mm of the package. For USB applications, the VBUS pin requires separate regulation per the USB 2.0 specification with bypass capacitors per the on-the-go USB-Spec for full-speed OTG guidelines.
Peripheral Pin Select (PPS) allows remapping of digital peripherals to any I/O pin, but input pins are limited to specific fixed-function pins per the device datasheet. Attempting to map an input peripheral to a non-input-capable pin results in silent signal failures. Always consult the device datasheet's PPS input map before committing to a PCB layout. For second-order clock configurations, ensure the SYSCLK frequency does not exceed the crystal or oscillator drive strength limit at low frequencies like 32 kHz.
合規資訊
RoHS and REACH compliant per Microchip product page. Industrial -40C to +85C temperature range; not AEC-Q100 qualified - automotive grade not available in this variant.