R5F109LEKFB#X0 - Low-Power 16-Bit MCU | Renesas Electronics
MPN: R5F109LEKFB#X0 ✓ 啟用中R5F109LEKFB#X0 概覽
An RL78/F12 microcontroller is a 16-bit embedded-processing device designed for low-power control, automotive networking, and compact electronic systems. Within the product hierarchy, it belongs to the Renesas RL78 family of flash microcontrollers. The RL78/F12 family combines configurable peripherals, low-consumption operating modes, and safety-focused hardware in packages ranging from 20 to 64 terminals, with family configurations offering 8 KB to 64 KB of flash memory.
The R5F109LEKFB#X0 includes a built-in LIN module, allowing a compact control unit to communicate with LIN nodes without adding a separate external interface device. Its safety-oriented functions include flash-memory CRC calculation, illegal-memory-access detection, RAM guard, A/D converter testing, and an SFR-related protection function. These features help designers identify memory or peripheral faults during operation.
As a 16-bit MCU, the R5F109LEKFB#X0 provides more arithmetic and control bandwidth than an 8-bit microcontroller while retaining the low-power operating characteristics associated with the RL78/F12 family. The LFQFP-64 package provides 64 physical terminals for power, ground, digital I/O, analog functions, clocking, programming, and communications. Its square gull-wing geometry supports conventional surface-mount assembly and provides more routing options than the smaller packages in the RL78/F12 lineup.
Typical uses include automotive LIN sub-assemblies, compact body-control modules, low-power sensor controllers, industrial interface nodes, instrumentation, and energy-conscious consumer equipment. The integrated LIN interface is particularly useful when a board must participate in a low-cost vehicle network while retaining local control functions. The 64-terminal package also provides more peripheral connectivity than smaller RL78/F12 configurations.
When laying out the PCB, assign every terminal according to the manufacturer pin-description table, preserve the exposed ground and supply connections specified for the package, and route high-current or sensitive analog paths away from switching nodes. Programming, clock configuration, peripheral assignment, and functional-safety settings should be validated against the Renesas product documentation and the specific product identifier before production release.
This product page consolidates the RL78/F12 family capabilities, verified package information, sourcing guidance, replacement analysis, and practical design considerations. It also distinguishes direct same-footprint options from broader functional alternatives so engineers can select a candidate without assuming unverified electrical, memory, peripheral, or software compatibility.
直接替換替代品,適用於 R5F109LEKFB#X0 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
R5F109LEKFB#H0
✅ 直接替換📋 參考替代品(不在目錄中)
R5F10AGDLFB#X5
✅ 直接替換📋 參考替代品(不在目錄中)
R5F109LEKFB#X0 最大額定值與電氣特性
| Product Type | 16-bit flash microcontroller |
| Product Family | RL78/F12 |
| Core Architecture | 16-bit |
| Nominal Supply Voltage | 3 V |
| 封裝 | LFQFP-64 |
| Package Code | LFQFP |
| Terminal Count | 64 terminals |
| Terminal Form | Gull wing |
| 安裝類型 | Surface mount |
| Package Shape | Square |
| Integrated LIN Interface | Yes, 1 LIN module |
| Flash Memory CRC Calculation | Supported |
| Illegal Memory Access Detection | Supported |
| RAM Guard | Supported |
| A/D Converter Testing | Supported |
R5F109LEKFB#X0 square 腳位配置指南
R5F109LEKFB#X0(square 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: R5F109LEKFB#X0.
請參閱 資料表 以查看完整腳位配置。
典型應用
R5F109LEKFB#X0 適用於 6 應用s: Automotive LIN Control Modules, Low-Power Sensor Controllers, Industrial LIN Interface Nodes, Body and Peripheral Control Units, Instrumentation and Measurement, Energy-Conscious Embedded Products.
Automotive LIN Control Modules
The R5F109LEKFB#X0 fits compact automotive control modules that communicate through LIN while performing local control functions. Its integrated LIN interface reduces the need for a separate external communications component, and the 64-terminal LFQFP provides additional routing capacity for sensors, switches, drivers, and diagnostic signals. The flash CRC, illegal-memory-access detection, RAM guard, and A/D converter testing features add hardware checks around critical memory and peripheral operations. The external LIN transceiver still requires validation for the vehicle network, and the final design must confirm the device's exact electrical and qualification limits.
推薦
Low-Power Sensor Controllers
The R5F109LEKFB#X0 is appropriate for distributed sensor nodes that must process local measurements while maintaining a compact, low-consumption design. Its RL78/F12 architecture is positioned for embedded control, and the integrated A/D converter testing function adds support for checking the conversion subsystem. The 64-terminal package leaves additional I/O available for digital sensors, communication links, and local actuators. Memory capacity, ADC resolution, clock rate, and low-power current should be checked against the specific sensor node architecture before schematic and firmware decisions are finalized.
推薦
Industrial LIN Interface Nodes
The R5F109LEKFB#X0 can serve as the local controller in industrial LIN interface nodes where a compact master or slave must combine communication with peripheral control. The integrated LIN module supports direct participation in a LIN network, while the 16-bit processor architecture provides more control capability than an 8-bit controller. The larger 64-terminal LFQFP package accommodates power management, communications, input sensing, and output drivers within one component. Designers should verify LIN timing, transceiver compatibility, operating voltage, peripheral allocation, and environmental requirements for each factory equipment installation.
推薦
Body and Peripheral Control Units
The R5F109LEKFB#X0 fits distributed vehicle body and peripheral control units that combine switch inputs, actuator outputs, diagnostics, and LIN communication. Its 64-terminal package offers a practical pin budget for multiple digital I/O functions, while the built-in LIN interface supports communication with other low-cost vehicle nodes. Hardware CRC calculation, illegal-memory-access detection, RAM guard, and A/D converter testing can strengthen system monitoring around flash, RAM, and mixed-signal functions. Production use still requires confirmation of the exact suffix-specific grade, temperature range, LIN electrical requirements, and automotive qualification documentation.
推薦
Instrumentation and Measurement
The R5F109LEKFB#X0 is suitable for compact instrumentation that needs local control, communication, and mixed-signal monitoring in one package. The 16-bit RL78/F12 core is designed for embedded measurement systems, and A/D converter testing provides a hardware function relevant to validating the conversion path. Its integrated LIN interface can link the instrument to a larger low-cost network. The 64-terminal LFQFP also provides more signal connections than smaller family members. Confirm the ADC resolution, acquisition characteristics, memory capacity, reference-voltage requirements, and calibration strategy before selecting the exact configuration.
推薦
Energy-Conscious Embedded Products
The R5F109LEKFB#X0 applies to compact products that need autonomous control while minimizing overall energy use. The RL78/F12 family is positioned around low-consumption operation, and the microcontroller combines control processing, analog monitoring, and LIN communications without requiring three separate devices. Its 64-terminal package can consolidate functions that would otherwise require additional logic. The design should compare the device's exact stop, standby, and operating currents against the product's duty cycle, then verify battery voltage limits, wake-up behavior, analog accuracy, and memory requirements using the manufacturer documentation.
推薦
推薦產品摘要
工程參考資料,適用於 R5F109LEKFB#X0 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | R5F109LEKFB#H0 | R5F10AGDLFB#X5 |
|---|---|---|---|
| Package | LFQFP-64 | LFQFP-64 | LFQFP-64 |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Core Architecture | 16-bit | 16-bit RL78/F12 | 16-bit |
主要差異化特點
- Integrated LIN interface in a 16-bit RL78/F12 controller (對比R5F10AGDLFB#X5)
- Functional-safety-oriented hardware checks (對比R5F109LEKFB#H0)
- Physical package continuity with the same-family H0 option (對比R5F109LEKFB#H0)
設計說明
合規資訊
The product page identifies a built-in LIN automotive interface and functional-safety functions, but it does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.