R5F10PGJKFB#V5 - 16-Bit RL78/F14 MCU | Renesas | Automotive
MPN: R5F10PGJKFB#V5 ✗ 停產R5F10PGJKFB#V5 概覽
An RL78 microcontroller combines a low-power 16-bit CPU core with embedded flash memory and peripheral functions for control-oriented systems. The RL78/F14 family is positioned above the RL78 series and covers 30-pin to 100-pin devices with 48 KB to 256 KB of flash. Its integration of CAN, LIN, timer RD, comparator, and motor-control capabilities supports compact automotive electronics, industrial controllers, and low-power embedded equipment.
The R5F10PGJKFB#V5 belongs to the portion of the RL78/F14 portfolio that includes CAN and LIN communication interfaces and BLDC motor-control support. These integrated functions can reduce the component count of a control board by replacing discrete interface and timing circuitry. The family is also designed around low current consumption, an important consideration for battery-powered or energy-conscious automotive and industrial systems.
Renesas describes the RL78/F14 family as an upper-level RL78 product with 48 KB to 256 KB flash variants and 30-pin to 100-pin packaging. This scalability supports shared software and peripheral architecture across multiple control nodes, although the exact flash capacity, RAM capacity, operating voltage, CPU frequency, peripheral configuration, and temperature grade of this specific ordering code must be confirmed from its ordering information and manufacturer datasheet.
Typical uses include CAN-connected automotive body controllers, LIN sub-networks, brushless DC motor controllers, sensor-conditioning nodes, industrial equipment interfaces, and compact embedded control modules. The CAN and LIN interfaces are especially useful where multiple nodes must communicate reliably over short-distance vehicle or industrial networks while the system remains in a low-power state.
Designers should confirm the obsolete status, exact pin assignments, peripheral availability, electrical limits, and software-device identifiers before beginning a replacement project. Because lifecycle risk matters for an obsolete MCU, use the Renesas cross-reference process and compare the complete ordering code, package, flash, RAM, pin functions, and peripheral map rather than relying on the family name alone.
This page organizes the available lifecycle, family, package, sourcing, and replacement information into an engineering-oriented selection guide. It also distinguishes documented RL78/F14 capabilities from ordering-code-specific details that must be checked before schematic reuse, firmware migration, or PCB replacement.
直接替換替代品,適用於 R5F10PGJKFB#V5 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: R5F10PGJKFB#V5 (相同外形與佔位).
R5F10PGJKFB#X5
✅ 直接替換📋 參考替代品(不在目錄中)
R5F10PGJKFB#H5
✅ 直接替換📋 參考替代品(不在目錄中)
R5F10PMGKFB#X5
✅ 直接替換📋 參考替代品(不在目錄中)
R5F10PGJCKFB#55
✅ 直接替換📋 參考替代品(不在目錄中)
R5F10PGJKFB#V5 最大額定值與電氣特性
| Product Type | 16-bit embedded microcontroller |
| Product Family | Renesas RL78/F14 |
| CPU Architecture | 16-bit RL78 |
| 封裝 | 48-pin LFQFP |
| 生命週期狀態 | Obsolete |
| Program Memory Family Range | 48 KB to 256 KB |
| Family Pin-Count Range | 30 pins to 100 pins |
| CAN Interface | Built-in CAN module |
| LIN Interface | Built-in LIN module |
| Motor Control Support | BLDC motor control support |
| Timing Peripheral | Timer RD |
| Analog Peripheral | Comparator |
| 安裝類型 | Surface mount |
R5F10PGJKFB#V5 48-pin lfqfp 腳位配置指南
R5F10PGJKFB#V5(48-pin lfqfp 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: R5F10PGJKFB#V5.
請參閱 資料表 以查看完整腳位配置。
典型應用
R5F10PGJKFB#V5 適用於 6 應用s: Automotive CAN Control Node, LIN Sub-Networks in Vehicle Electronics, Brushless DC Motor Controller, Industrial Sensor Conditioning, Low-Power Equipment Interface, Legacy Control-System Maintenance.
Automotive CAN Control Node
The R5F10PGJKFB#V5 fits an automotive CAN control node because the RL78/F14 family includes a built-in CAN module, timer RD, comparator, and low-current operation. It can consolidate communication, timing, and basic signal processing around one 16-bit controller instead of requiring separate interface logic. The CAN physical layer still needs an appropriate transceiver, while I/O conditioning depends on the exact 48-pin assignment and vehicle voltage environment. Before adoption, verify the target ordering code’s electrical limits, temperature grade, qualification, and pin map, and confirm that its peripheral configuration matches the existing firmware.
推薦
LIN Sub-Networks in Vehicle Electronics
The built-in LIN module identified for the RL78/F14 family makes R5F10PGJKFB#V5 applicable to vehicle sub-networks handling switches, sensors, seat controls, and climate-related nodes. Integrating the communication protocol, timer functions, and comparator logic can simplify a compact low-power module while keeping the MCU footprint manageable. A LIN transceiver and suitable protection network remain external design elements. Because this ordering code is obsolete, a production migration should compare the complete ordering attributes and peripheral map before placing it in a new vehicle program.
推薦
Brushless DC Motor Controller
The RL78/F14 family’s BLDC motor-control support, timer RD, and comparator resources align with R5F10PGJKFB#V5 for compact brushless motor controllers used in automotive and industrial equipment. These functions support sensing and timing around an external gate-drive stage, reducing the amount of separate control logic required. The MCU does not replace the power stage, gate driver, current sensing network, or protection circuitry. Engineering validation must confirm the exact timer channels, comparator assignments, PWM behavior, and package pins for the selected ordering code.
推薦
Industrial Sensor Conditioning
R5F10PGJKFB#V5 can serve as the control core in an industrial sensor-conditioning module that combines analog comparison, timed sampling, and local communications. The comparator supports threshold or protection functions, while timer RD can establish repeatable timing and the family’s low-current focus is useful in distributed equipment. Appropriate sensor excitation, input filtering, level translation, and output isolation must be added around the microcontroller. The exact I/O count, analog thresholds, memory capacity, and operating limits should be confirmed from the manufacturer datasheet for this ordering code.
推薦
Low-Power Equipment Interface
The low-consumption characteristics of the RL78/F14 family make R5F10PGJKFB#V5 relevant to equipment interfaces that spend much of their operating cycle idle. It can manage communication, periodic measurement, actuator commands, and fault monitoring while using a 48-pin LFQFP package suited to compact control boards. Power-system design still needs attention to sleep modes, wake-up sources, external pull components, and regulator quiescent current. Since the exact MCU is obsolete, new products should evaluate an active-family replacement rather than treating the legacy ordering code as a long-term procurement strategy.
推薦
Legacy Control-System Maintenance
R5F10PGJKFB#V5 is primarily useful for maintaining control boards already designed around this exact 16-bit RL78/F14 device. Its 48-pin LFQFP construction, CAN and LIN resources, timer RD, comparator, and BLDC support can preserve an existing architecture without redesigning the complete control module. Maintenance teams should record the installed ordering suffix, flash contents, peripheral settings, and pin-level behavior before ordering replacements. For future revisions, compare an active Renesas option against the original for boot timing, watchdog behavior, communications, memory, and qualification.
推薦
推薦產品摘要
工程參考資料,適用於 R5F10PGJKFB#V5 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | R5F10PGJKFB#X5 | R5F10PGJKFB#H5 | R5F10PMGKFB#X5 | R5F10PGJCKFB#55 |
|---|---|---|---|---|---|
| Package | 48-pin LFQFP | 48-pin LFQFP | 48-pin LFQFP | 48-pin LFQFP | 48-LFQFP (7x7 mm) |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Product Family | RL78/F14 | RL78/F14 | RL78/F14 | RL78/F14 | RL78/F14 |
| CPU Architecture | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 | 16-bit RL78 |
| CAN Interface | Built-in | Built-in at RL78/F14 family level | Built-in at RL78/F14 family level | Built-in at RL78/F14 family level | Built-in at RL78/F14 family level |
| LIN Interface | Built-in | Built-in at RL78/F14 family level | Built-in at RL78/F14 family level | Built-in at RL78/F14 family level | Built-in at RL78/F14 family level |
| BLDC Motor Control | Supported at RL78/F14 family level | Supported at RL78/F14 family level | Supported at RL78/F14 family level | Supported at RL78/F14 family level | Supported at RL78/F14 family level |
主要差異化特點
- Direct association with the RL78/F14 automotive-oriented feature set (對比R5F10PGJCKFB#55)
- Established 48-pin LFQFP integration for compact control boards (對比R5F10PGJCKFB#55)
- Family-level CAN, LIN, timer RD, comparator, and BLDC support (對比R5F10PGJKFB#X5)
設計說明
Do not approve a replacement from the R5F10PGJ family designation alone. The ordering suffix must be checked for package, temperature, qualification, and other production attributes. Compare the complete ordering code, memory capacity, electrical limits, pin names, alternate-function mapping, and peripheral availability in the manufacturer datasheet before treating a related RL78/F14 device as a drop-in replacement.
Preserve the original 48-pin LFQFP land pattern, exposed-pad requirements, and pad dimensions when replacing the MCU. Review power and ground pins, programming-interface signals, reset behavior, communication pins, and all analog-capable pins in the exact pin-description table. PCB rework should minimize stress on the leaded package and include adequate thermal copper for the device's actual dissipation.
Verify startup, operating, and sleep current in the exact datasheet because the RL78/F14 family's low-consumption characteristics do not eliminate regulator and external-load requirements. Check brownout behavior, external clock startup, reset release, and peripheral state during low-power transitions. A migration is safer when existing firmware retention, watchdog settings, and communication timing remain unchanged.
合規資訊
Ordering-code-specific environmental declarations and automotive qualification were not established by the available manufacturer or distributor records. Confirm these attributes with Renesas before procurement or production release.