R5F363B6NFE#U0 - 20MHz 16-Bit Flash MCU | Renesas | LQFP-80
MPN: R5F363B6NFE#U0 ✓ 啟用中R5F363B6NFE#U0 概覽
A microcontroller is a programmable integrated circuit that combines a processor core, program memory, data memory, peripheral interfaces, and I/O circuitry on one device. This MCU belongs to the hierarchy of embedded processor, microcontroller, 16-bit microcontroller, and flash MCU. Its broad I/O count supports designs that need multiple digital control lines, timers, serial communication channels, and analog-adjacent peripheral functions within a single package.
The principal engineering characteristics of the R5F363B6NFE#U0 include a 20 MHz clock speed, 128 KB flash program memory, a 2.7 V to 5.5 V operating supply range, and 71 I/O ports. The M16C/60 Series CPU core uses a R8C-style CISC architecture and is designed for efficient embedded instruction execution. The 80-pin LQFP-80 package exposes considerably more I/O than smaller 32-pin or 48-pin MCUs while remaining compatible with conventional surface-mount assembly methods.
The device is suitable for industrial control equipment, factory automation modules, motor and motion controllers, instrumentation, building-control interfaces, and connected peripheral controllers. Its 71 I/O ports can reduce the need for external I/O expanders in systems that require numerous status indicators, relay outputs, sensor inputs, or communication connections. The 5.5 V upper supply rating also makes it suitable for 5 V industrial and control environments when the system is designed around a regulated 3.3 V or 5 V rail.
Designers should verify clock settings, peripheral assignments, and port multiplexing against the manufacturer datasheet before laying out the PCB. Because the package exposes 80 pins and the pin names for every terminal were not established here, the pin-description table in the Renesas datasheet should be used directly when assigning tracks. Decoupling requirements, oscillator connections, reset behavior, and programming-mode pins must also follow the manufacturer reference circuit.
This page consolidates lifecycle, operating-range, memory, package, and I/O information into a practical selection reference. It also compares the closest same-family alternative identified through cross-reference research and highlights the engineering trade-offs between 128 KB and 144 KB flash configurations, supply packaging, and board-reuse considerations.
直接替換替代品,適用於 R5F363B6NFE#U0 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
R5F363B6DFE#U0
✅ 直接替換📋 參考替代品(不在目錄中)
R5F363B6NFE#U0 最大額定值與電氣特性
| 生命週期狀態 | Active |
| Maximum Clock Speed | 20 MHz |
| CPU Architecture | 16-bit M16C/60 Series core |
| Program Memory Type | Flash |
| Program Memory Size | 128 KB |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Number of I/O Ports | 71 |
| Package Type | LFQP, 80-pin LQFP |
| Package Body Size | 12 mm x 12 mm |
| Package Pitch | 0.50 mm |
| Package Material | Plastic |
| 安裝類型 | Surface Mount |
| Manufacturer | Renesas Electronics Corporation |
| RoHS 狀態 | RoHS |
R5F363B6NFE#U0 plastic 腳位配置指南
R5F363B6NFE#U0(plastic 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: R5F363B6NFE#U0.
請參閱 資料表 以查看完整腳位配置。
典型應用
R5F363B6NFE#U0 適用於 6 應用s: Factory Automation Controller, Industrial Sensor and Signal Interface, Motor and Motion Controller, Building Control and HVAC Interface, Programmable Test and Measurement Equipment, Consumer Peripheral and Appliance Control.
Factory Automation Controller
The R5F363B6NFE#U0 fits factory automation modules that must collect numerous digital inputs and drive multiple control outputs. Its 71 I/O ports, 20 MHz clock, and 128 KB flash provide enough capacity for sequencing logic, diagnostics, and communication handling without an external port expander. A 2.7 V to 5.5 V operating range supports regulated industrial rails, while the 80-pin LQFP-80 package provides a standard 0.50 mm pitch assembly footprint. Designers should verify timer channels, serial interfaces, port-multiplexing options, and the device operating-temperature grade in the Renesas datasheet.
推薦
Industrial Sensor and Signal Interface
The R5F363B6NFE#U0 is suitable for multi-channel sensor aggregation where many inputs must be scanned and converted into control data. The 71 available I/O ports simplify connection of digital sensors, alarm lines, and status inputs, while the 16-bit M16C/60 Series core supports efficient embedded instruction execution at up to 20 MHz. Its 128 KB flash can hold acquisition routines, filtering logic, calibration tables, and a communication stack. Confirm the analog-capable peripheral set and pin assignments in the manufacturer documentation before selecting it for a signal-conditioning board.
推薦
Motor and Motion Controller
The R5F363B6NFE#U0 can serve as the control processor for stepper, solenoid, or relay-based motion systems where numerous discrete outputs and inputs are required. Its 20 MHz clock supports responsive task execution, and the 128 KB flash provides room for position tables, fault handlers, and motion profiles. The 71-port count allows direct connection of limit switches, home sensors, gate drivers, and status LEDs. Verify timer outputs, external interrupts, and PWM-capable terminals against the pin table, and account for driver transients when designing the board layout.
推薦
Building Control and HVAC Interface
The R5F363B6NFE#U0 is well suited to building-control modules that coordinate HVAC equipment, dampers, sensors, and digital supervisory signals. Its 71 I/O ports reduce the component count for distributed room controllers, while the 128 KB flash can accommodate networking stacks, control tables, and diagnostic firmware. The 2.7 V to 5.5 V supply range allows deployment on common 3.3 V or 5 V regulated rails. For production use, confirm the temperature grade, watchdog behavior, communication peripherals, and low-power requirements against the Renesas datasheet before schematic freeze.
推薦
Programmable Test and Measurement Equipment
The R5F363B6NFE#U0 can serve as the embedded controller in programmable instrumentation, fixture controllers, and automated test equipment. Its 71 I/O ports support relay matrices, limit inputs, status lamps, and external trigger lines, while the 16-bit core and 20 MHz clock provide useful control throughput. The 128 KB flash is suitable for sequencing firmware, calibration records, and communication routines. Keep high-current switching paths and sensitive analog inputs physically separated, and confirm the exact timer, serial, and interrupt resources required by the test architecture.
推薦
Consumer Peripheral and Appliance Control
The R5F363B6NFE#U0 can control specialized appliances and peripherals that need a broad set of digital connections but limited analog complexity. The 128 KB flash supports feature-rich firmware, the 20 MHz clock handles concurrent control tasks, and the 80-pin LQFP-80 package is compatible with automated surface-mount assembly. Its 71 I/O ports simplify keypads, displays, solenoids, and status feedback. Because the operating-temperature grade and specific peripheral mix are not established here, validate both against the manufacturer datasheet and the end-product environmental requirements.
推薦
推薦產品摘要
工程參考資料,適用於 R5F363B6NFE#U0 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | R5F363B6DFE#U0 |
|---|---|---|
| Package | LQFP-80 (12 mm x 12 mm, 0.50 mm pitch) | LQFP-80 (12 mm x 12 mm, 0.50 mm pitch) |
| Brand | Renesas Electronics | Renesas Electronics |
| CPU Architecture | 16-bit M16C/60 Series core | 16-bit R8C-family MCU |
| Program Memory | 128 KB flash | 144 KB flash |
| Supply Voltage Range | 2.7 V to 5.5 V | 3.3 V / 5 V |
| Memory Difference | Baseline 128 KB flash configuration | 16 KB more flash, 12.5% above target |
主要差異化特點
- Exact 128 KB flash configuration for established 80-pin designs (對比R5F363B6DFE#U0)
- Large I/O count for control-oriented embedded systems (對比R5F363B6DFE#U0)
- Dual-rail operating flexibility (對比R5F363B6DFE#U0)
- Active lifecycle status (對比R5F363B6DFE#U0)
設計說明
Use the manufacturer pin-description table for every one of the 80 terminals before assigning PCB functions. The 0.50 mm pitch LQFP-80 footprint requires careful fanout, adequate solder-mask relief, and inspection of fine-pitch joints after assembly. Place decoupling capacitors adjacent to the device power terminals, keep oscillator traces short, and route programming or debug signals away from switching-node copper.
Design the board for a stable supply within the R5F363B6NFE#U0 operating range of 2.7 V to 5.5 V. Determine the actual core and peripheral clock configuration before interpreting the 20 MHz maximum frequency, because processing speed does not by itself guarantee acceptable timing margin. Validate regulator startup, load transients, and I/O levels in system, and avoid driving external signals above the voltage limits specified for the selected pins.
Do not assume that two 80-pin LQFP devices are interchangeable solely because their outlines match. R5F363B6DFE#U0 carries 144 KB of flash compared with 128 KB for the target, and cross-reference information notes some electrical-characteristic differences. Compare port multiplexing, peripheral allocation, timing, interrupt behavior, and programming configuration in the manufacturer datasheets before changing the approved part number.
Group external signals according to sensitivity rather than by function in the schematic. Keep clock, reset, and low-speed communication traces away from motor drives, relay contacts, switching regulators, and high-current edge transitions. Provide a quiet analog reference region if the selected peripheral functions are used for measurement, and include test points for supply voltage, reset state, and programming interfaces to simplify production diagnostics.
合規資訊
The distributor listing identifies the R5F363B6NFE#U0 as RoHS. No additional compliance declarations or automotive-qualification details were established, so the remaining fields are recorded as unknown.