Texas Instruments

SN75158D - Dual RS-422 Line Driver | Texas Instruments

MPN: SN75158D ✓ 啟用中
5 V Vdss 8-pin SOIC (D) Package
MOQ: 1 |

SN75158D 概覽

Texas Instruments SN75158D is a dual differential line driver designed for ANSI EIA/TIA-422-B and ITU V.11 balanced-line interfaces, with two transmitters in an 8-pin SOIC package. It operates from a nominal 5 V supply, supports signaling rates up to 10 Mbit/s, and is specified over 0°C to 70°C. Its TTL totem-pole outputs provide high-current drive capability for balanced twisted-pair lines while maintaining a high-impedance output state when disabled.

A differential line driver is an interface IC that converts two single-ended logic signals into complementary differential outputs. In the broader hierarchy, it belongs to line drivers, interface transceivers, and data-communication semiconductors. Differential signaling transmits the same information on two conductors, allowing receiver circuitry to reject common-mode noise and improve reliability over longer cable runs compared with single-ended links.

Each SN75158D transmitter provides high-current source and sink capability suitable for balanced lines at normal line impedance without excessive power dissipation. The device includes a common enable function, enabling the outputs to enter a high-impedance state when the interface is inactive. Its 8-pin SOIC package supports conventional surface-mount assembly and is a practical choice for legacy industrial, telecommunications, instrumentation, and point-to-point data interfaces.

The SN75158 architecture is centered on two independent differential output channels. TTL-compatible totem-pole output stages actively drive one line high while pulling the other low, allowing the differential receiver to recover the intended signal from the voltage between the pair. This arrangement supports full-duplex designs when the receive function is implemented separately and balanced, multidrop point-to-point arrangements when the cable topology and termination strategy meet the interface specifications.

Typical uses include RS-422-compatible links between controllers and peripheral equipment, industrial control consoles, test equipment, telecom peripherals, and legacy instrumentation systems. Because the SN75158 is a driver rather than a complete transceiver, a separate receiver such as the SN75157 family member is required when the same endpoint must both transmit and receive. The operating temperature and 5 V supply requirements make the part especially suitable for conventional commercial equipment rather than automotive or extended-temperature systems.

PCB design should preserve the balanced geometry of each differential pair and provide a continuous ground reference beneath the cable when practical. Keep the complementary outputs routed with matched impedance and avoid adding excessive stub lengths. Confirm the receiver, cable length, connector pinout, enable polarity, and termination arrangement against the complete system interface before releasing a layout.

This product page combines the manufacturer's interface description with practical guidance on application fit, PCB implementation, qualification questions, and same-package alternatives. It also identifies which functions remain outside the transmitter-only device, helping engineers determine whether SN75158D is appropriate before beginning a board-level design.

直接替換替代品,適用於 SN75158D — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: SN75158D (相同外形與佔位) — 差異在於 Package, Product Type.

Texas Instruments
Package: SOIC-16 (D)
Product Type: Quadruple differential RS-232 line receiver
比較對象 SN75158D →

SN75158DR

✅ 直接替換
📦 8-pin SOIC (D)
0 electrical-rating differences and 0 pin-count differences; order-code packaging differs

📋 參考替代品(不在目錄中)

SN75158DG4

✅ 直接替換
📦 8-pin SOIC (D)
0 electrical-rating differences and 0 pin-count differences; order-code packaging differs

📋 參考替代品(不在目錄中)

SN75158D 規格

Product Type Dual differential line driver
Number of Drivers 2
Nominal Supply Voltage 5 V
Maximum Signaling Rate 10 Mbit/s
Supported Interface RS-422 / ANSI EIA/TIA-422-B / ITU V.11
輸出類型 TTL totem-pole differential output
Disabled Output State High impedance
工作溫度範圍 0°C to 70°C
Fault Protection Range -10 V to 15 V
封裝 8-pin SOIC (D)
Package Pin Count 8 pins
安裝類型 Surface mount
Signal Type Balanced differential
Typical Load Twisted-pair balanced line at normal line impedance

SN75158D 8 pins 腳位配置指南

SN75158D(8 pins 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

SN75158D 的 8 pins 封裝腳位圖

無詳細腳位定義資料: SN75158D.

請參閱 資料表 以查看完整腳位配置。

典型應用

SN75158D 適用於 6 應用s: Industrial Control Point-to-Point Links, Telecommunications Peripheral Interfaces, Test and Measurement Equipment, Legacy Instrumentation Data Links, RS-422-Compatible Data Ports, Data Acquisition Terminals.

🏭

Industrial Control Point-to-Point Links

SN75158D fits industrial point-to-point links that require two balanced transmit channels from a 5 V controller. Its two TTL totem-pole drivers provide active drive for twisted-pair cabling, while the common enable control can place both outputs in a high-impedance state during reset or bus isolation. The 10 Mbit/s maximum signaling rate supports short, high-speed data paths, and the 0°C to 70°C rating suits ordinary indoor control equipment. Designers should maintain closely matched routing between complementary outputs, provide a suitable ground reference where possible, and verify termination against the receiver and cable length. Because SN75158D contains transmitters only, the receiving endpoint requires a separate differential receiver such as the SN75157 family member.

🌐

Telecommunications Peripheral Interfaces

SN75158D is appropriate for legacy telecommunications peripheral interfaces built around balanced copper wiring and TTL-compatible logic. Its differential outputs reduce susceptibility to common-mode interference compared with a single-ended driver, while the two-channel arrangement supports simultaneous command paths or paired transmit functions. The device operates from a nominal 5 V supply and can signal at rates up to 10 Mbit/s, making it useful for equipment requiring deterministic, point-to-point connections. The disabled high-impedance state helps isolate the line during reset or controlled shutdown. In a telecom chassis, keep the driver close to the line connector, provide a low-impedance return path, and verify that the connector pin assignment and cable topology comply with ANSI EIA/TIA-422-B or ITU V.11 requirements.

📺

Test and Measurement Equipment

SN75158D can drive balanced connections from test and measurement instruments that need reliable data transfer over cables longer or noisier than ordinary logic wiring. The two differential transmitters support common-mode rejection at the receiver, while their high-current totem-pole output stages avoid the power dissipation associated with driving a line inefficiently. A maximum signaling rate of 10 Mbit/s accommodates legacy automated-test and laboratory-control interfaces. Use short, geometry-controlled traces and route the outputs toward the connector without unrelated digital activity nearby. The common enable function can suppress line activity during instrument initialization, but the system designer must still confirm timing, cable length, receiver thresholds, and termination because SN75158D does not include receive, equalization, or isolation circuitry.

🔧

Legacy Instrumentation Data Links

SN75158D is well suited to legacy instrumentation systems that use balanced differential signalling between a controller and a remote measurement or control module. Its two transmitter channels reduce the number of driver packages needed when multiple independent data paths are required, and its 8-pin SOIC format simplifies conventional surface-mount assembly. The device supports operation from 0°C to 70°C, matching many commercial laboratory and industrial instruments. Place each complementary output pair on tightly matched routing, connect the cable shield or ground according to the system grounding method, and avoid long unprotected stubs. Because this is a transmitter-only device, a separate receiver is needed at the remote endpoint, and engineers should evaluate whether modern isolated or differential interface products better meet newer EMC requirements.

🖥️

RS-422-Compatible Data Ports

SN75158D provides the transmit section for an RS-422-compatible data port with two differential channels. ANSI EIA/TIA-422-B and ITU V.11 compatibility makes the device relevant to established balanced-interface equipment, and the high-impedance disabled state supports controlled connection to the cable. The 10 Mbit/s signaling capability is sufficient for many legacy peripheral buses and control links, although actual line rate depends on cable length, loading, termination, and receiver performance. Use a separate SN75157-family receiver at the opposite end and assign the enable function so no partially initialized transmitter drives the line. Because the SN75158D offers no galvanic isolation or integrated termination, those functions must be handled elsewhere in the interface architecture.

📡

Data Acquisition Terminals

SN75158D can serve as the outbound interface of a data-acquisition terminal that transfers commands or results to a remote controller over balanced copper cabling. Differential outputs help preserve data integrity in cabinets or installations where common-mode voltage may vary, and two transmitters support paired command or status paths within one package. The device's nominal 5 V operation integrates readily with TTL-based digital systems, while its 0°C to 70°C range covers standard indoor instrumentation environments. Keep the two conductors of each differential pair geometrically matched, place the receiver termination near the receiving device, and minimize copper exposure to unrelated switching nodes. The SN75158D does not perform isolation, so installations with large ground-potential differences require an external isolation strategy.

推薦產品摘要

SN75157D Texas Instruments 用於: Industrial Control Point-to-Point Links, Telecommunications Peripheral Interfaces, Test and Measurement Equipment, Legacy Instrumentation Data Links, RS-422-Compatible Data Ports, Data Acquisition Terminals DS9638CM Dual-driver interface alternative for redesign evaluation 用於: Industrial Control Point-to-Point Links, Legacy Instrumentation Data Links SN75158DR Same-family ordering option 用於: Telecommunications Peripheral Interfaces SN75150D Texas Instruments 用於: Test and Measurement Equipment, Data Acquisition Terminals SN75158DG4 Same-family ordering option 用於: RS-422-Compatible Data Ports
Where to buy SN75158D online?
Use the Request a Quote form on this page to request SN75158D pricing, availability, and order handling through XAIPART. The exact Texas Instruments SN75158D orderable designation uses the D suffix for the 8-pin SOIC package. Because channel inventory and commercial terms can change, engineers should submit the required quantity, target date, and packaging preference with the quote request.
What is the price of SN75158D?
The current SN75158D price is generated through the Request a Quote form on this page rather than presented as a static figure. Request pricing for the exact Texas Instruments MPN SN75158D and specify quantity, reel or tube preference, and production schedule. The structured price evidence for this exact suffix and its explicit quantity breaks is currently unavailable, so no price value should be inferred from another package code.
What is the lead time for SN75158D?
Use the Request a Quote form on this page to confirm the current SN75158D lead time and minimum order quantity. The device is offered by Texas Instruments in an 8-pin SOIC D package, with 0°C to 70°C operating-temperature limits. Lead time can depend on the exact packaging configuration and order quantity, so it should be confirmed for the production quantity rather than assumed from general catalog availability.
Is SN75158D in stock?
Stock status for SN75158D should be confirmed through the Request a Quote form on this page. The exact catalog designation is SN75158D, a dual differential driver in an 8-pin SOIC package, and Texas Instruments also lists the base SN75158 family as active. Submit the required quantity and packaging preference so the quotation can reflect current channel inventory rather than an outdated availability listing.
What are the key specifications of SN75158D that engineers should know?
The SN75158D is a dual RS-422-compatible differential line driver with two transmitters, no integrated receivers, a nominal 5 V supply, and a maximum signaling rate of 10 Mbit/s. It uses TTL totem-pole outputs with a high-impedance disabled state and comes in an 8-pin SOIC package rated from 0°C to 70°C. These characteristics define it as a transmitter-only balanced-line interface device.
What is the operating voltage of SN75158D?
The SN75158D uses a nominal 5 V power supply for its interface circuits. The device is associated with ANSI EIA/TIA-422-B and ITU V.11 signaling and provides two differential transmitter channels. Its catalog operating-temperature range is 0°C to 70°C, while the stated fault-protection range is -10 V to 15 V. Use the manufacturer datasheet when checking absolute maximum conditions and supply tolerances.
What is SN75158D used for?
SN75158D is used to transmit two differential data channels over balanced copper lines such as twisted pair. Each channel uses complementary TTL totem-pole outputs with relatively high current capability, while the common enable function places the outputs in a high-impedance state when inactive. Typical equipment includes industrial controllers, telecom peripherals, test instruments, and legacy point-to-point control systems.
Where to download the SN75158D datasheet PDF?
Download the SN75158D datasheet PDF from the Texas Instruments datasheet link on this page or from the manufacturer's SN75158 product page. The datasheet covers the differential line-driver function, ANSI EIA/TIA-422-B and ITU V.11 applications, electrical characteristics, and the 8-pin SOIC connection information. Use it as the controlling document for absolute maximum ratings and final PCB assignments.
Where can I find the SN75158D pinout?
The SN75158D pinout appears in the pin-configuration section of the Texas Instruments SN75158 datasheet. The D package contains eight pins and is identified by Texas Instruments as the SOIC option for this dual differential line driver. Because pin names and enable behavior must be checked against the specific datasheet revision, use its pin-description table when assigning PCB nets rather than inferring connections from receiver devices.
SN75158D vs SN75157D - which is better for RS-422?
SN75158D is the transmitter option, with two differential drivers and no receivers; SN75157D is the complementary dual differential receiver with no transmitters. Choose SN75158D when the endpoint sends data and use SN75157D when it receives data. A bidirectional RS-422 endpoint normally requires both functions, potentially using one driver and one receiver rather than replacing the SN75158D with the receiver.
When should I choose SN75158D over a single-channel RS-422 driver?
Choose SN75158D when the interface needs two independent differential transmit channels from one 5 V device. Integrating both drivers into one 8-pin SOIC can reduce duplicated support circuitry and make enable control easier to coordinate. A single-channel driver may be preferable only when the design has one transmit path, needs a different package, or requires electrical ratings not provided by the SN75158.
Is SN75158D suitable for industrial control applications?
SN75158D is suitable for many commercial industrial-control interfaces because it supports balanced RS-422-style signaling, a 10 Mbit/s maximum signaling rate, and a 0°C to 70°C operating range. It is not identified as an automotive-qualified or extended-temperature component. Verify cable length, connector assignment, termination, isolation, and electromagnetic-compatibility requirements before applying it to long or noisy industrial wiring.
What can replace SN75158D?
The closest same-package replacements identified for SN75158D are the Texas Instruments SN75158DR and SN75158DG4 order variants, both associated with the same 8-pin SOIC dual differential driver family. They provide zero electrical-rating and zero pin-count differences in the available manufacturer-family information. PCB compatibility should still be confirmed against the manufacturer datasheet for the exact replacement suffix.
Is SN75158D the same as DS9638CM?
No. The DS9638CM is described as a possible functional substitute in some RS-485 applications, but it is not a fully pin-compatible drop-in replacement for SN75158D because the pinouts and enable logic differ. Although both devices use an 8-pin SOIC package and provide two drivers, an existing SN75158D board cannot be assumed to accept DS9638CM without schematic, PCB, and signal-integrity review.
What is the best cross-brand equivalent for SN75158D?
No cross-brand, pin-compatible replacement can be confirmed from the available cross-reference information. The DS9638CM is explicitly identified as not fully pin-compatible, so it should not be presented as a drop-in alternative despite its similar 8-pin SOIC format and dual-driver function. For a cross-brand migration, request the candidate manufacturer's pinout and electrical data and compare enable polarity, output impedance, supply limits, and propagation behavior against the original design.

工程參考資料,適用於 SN75158D — 比較、設計指引及合規資訊。

選型指南

Choose SN75158D when the design requires two differential transmit channels from a 5 V source and uses an 8-pin SOIC interface compatible with ANSI EIA/TIA-422-B or ITU V.11 balanced lines. Its 10 Mbit/s capability, TTL totem-pole outputs, and common high-impedance disabled state suit conventional industrial, telecommunications, test-equipment, and legacy instrumentation links. Pair it with a separate SN75157-family receiver when the opposite endpoint must receive data. Choose SN75158DR or SN75158DG4 when their specific order and packaging codes better match production requirements, since the available family information indicates no electrical or pin-count difference from SN75158D. Do not select DS9638CM as a drop-in replacement for an existing SN75158D board: although it is also a dual-driver 8-SOIC device, its pinout and enable logic differ. For new designs requiring isolation, extended temperature, automatic termination, or higher integration, evaluate whether a different transceiver architecture better satisfies those requirements.

與替代品比較

參數 本產品 SN75158DR SN75158DG4
Product Type Dual differential line driver Dual differential line driver Dual differential line driver
Brand Texas Instruments Texas Instruments Texas Instruments
Package 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC (D)
Number of Drivers 2 2 2
Number of Receivers 0 0 0
Nominal Supply Voltage 5 V 5 V 5 V
Maximum Signaling Rate 10 Mbit/s 10 Mbit/s 10 Mbit/s
Operating Temperature Range 0°C to 70°C 0°C to 70°C 0°C to 70°C
Fault Protection Range -10 V to 15 V -10 V to 15 V -10 V to 15 V
Interface Standard ANSI EIA/TIA-422-B and ITU V.11 ANSI EIA/TIA-422-B and ITU V.11 ANSI EIA/TIA-422-B and ITU V.11
Output Stage TTL totem-pole differential output TTL totem-pole differential output TTL totem-pole differential output

主要差異化特點

  • Two balanced transmit channels in one package (對比SN75157D)
  • High-current balanced-line output capability (對比DS9638CM)
  • Compatibility with established balanced-interface specifications (對比SN75150D)

設計說明

Route each complementary output pair with matched geometry and consistent spacing so the two conductors experience nearly identical propagation delays and losses. Keep the traces short, avoid long stubs, and provide a continuous ground reference beneath the cable where the installation permits it. Place any termination at the receiving endpoint according to the complete interface design. Review the connector assignment against the manufacturer's pin-description table before routing because the SOIC footprint alone does not establish pin compatibility.

Do not treat SN75158D as a complete RS-422 transceiver: it contains two transmitters and no receivers. A receiving endpoint requires a separate differential receiver, such as a member of the SN75157 family, and the two devices must use consistent enable timing and signal polarity. Also verify that the external interface voltage remains within the stated -10 V to 15 V fault-protection range. The DS9638CM may serve certain RS-485 designs, but its differing pinout and enable logic make it unsuitable as an automatic board replacement.

The SN75158D is designed for nominal 5 V operation. Decouple the supply locally with a suitable bypass capacitor and keep the supply-return path short to reduce susceptibility to simultaneous switching noise from the TTL totem-pole outputs. Account for both the host's 5 V supply requirements and the current drawn while the differential outputs are active. If the driver is disabled during system reset, ensure the receiver and system firmware interpret the resulting high-impedance line state correctly.

The maximum 10 Mbit/s signaling rate does not by itself guarantee error-free communication over every cable length or topology. Evaluate cable attenuation, loading, stub length, receiver thresholds, and termination for the intended installation. Balanced routing helps reject common-mode noise, but it does not remove the need for a sound ground reference or protection against large transients. Keep switching nodes and high-current outputs away from the differential pair where practical.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The interface standards explicitly identified for this product are ANSI EIA/TIA-422-B and ITU V.11. RoHS, REACH, lead-free, halogen-free, and conflict-minerals statuses were not identified for the exact SN75158D ordering code.

相關搜尋

SN75158D datasheet SN75158D datasheet pdf SN75158D pinout SN75158D equivalent SN75158D replacement SN75158D cross reference Texas Instruments SN75158D SN75158D SOIC-8 pinout SN75158D vs SN75157D SN75158D vs DS9638CM SN75158D price SN75158D stock SN75158D RS-422 application circuit SN75158 5V dual line driver what is SN75158D used for

相關元件與詞彙

Texas Instruments SN75158D SN75158DR SN75158DG4 SN75157D SN75150D DS9638CM dual differential line driver RS-422 interface ANSI EIA/TIA-422-B ITU V.11 balanced differential signaling TTL totem-pole output high-impedance state RS-485 twisted-pair cable line driver interface IC data-communication semiconductor 10 Mbit/s signaling rate 5 V supply 8-pin SOIC surface-mount package industrial control telecommunications equipment
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情