STM32F031G6U6 - 48MHz Cortex-M0 32KB MCU | STMicroelectronics
MPN: STM32F031G6U6 ✓ 啟用中STM32F031G6U6 概覽
A microcontroller is an integrated circuit containing a processor core, nonvolatile program memory, volatile working memory, peripherals, and input/output circuitry. The STM32F031G6U6 belongs to the STM32F0 family and sits within the broader hierarchy of embedded microcontroller, 32-bit RISC processor, Arm Cortex-M processor, and semiconductor. Its compact package and mixed-signal peripherals make it suitable for cost-sensitive control, sensing, communication, and motor-adjacent products.
The principal resources include 32 KB of Flash, 4 KB of SRAM, and a maximum CPU frequency of 48 MHz. Its communication peripherals comprise one I2C interface, one SPI or I2S interface, and one USART. For analog measurements, the MCU includes one 12-bit ADC. Nine timers support periodic timing, input capture, output compare, PWM generation, and other time-dependent control functions. These resources allow the MCU to consolidate several discrete functions on a single board.
The STM32F031G6U6 uses an Arm Cortex-M0 core with a 32-bit RISC architecture. The core executes compact firmware from embedded Flash while using SRAM for working data and the stack. Its 48 MHz maximum operating frequency provides useful headroom for digital control loops, serial protocol handling, and periodic sensor processing. The 12-bit ADC resolution is suitable for many industrial control, consumer accessory, and compact instrumentation applications where higher-resolution conversion is not required.
Typical uses include sensor-hub and environmental-monitoring nodes, small motor controllers, digital control panels, communication modules, and compact consumer products. Designers can use the I2C interface for sensors and EEPROMs, SPI or I2S for higher-speed peripherals or digital audio devices, and USART for point-to-point links. The nine timers allow multiple PWM or capture channels to be allocated without adding separate timing peripherals.
Board design should preserve clean separation between analog and digital returns, route sensitive ADC inputs away from switching nodes, and place decoupling capacitors close to the power pins. Firmware and peripheral assignments should be checked against the manufacturer pin description and pinout before PCB release. This page also organizes package, interface, memory, sourcing, and replacement considerations into a single engineering reference for design-in decisions.
The STM32F031G6U6 is best evaluated against the complete design rather than by clock speed alone. Verify voltage, memory, ADC, timer, serial-interface, package, and software requirements together. A lower-cost or newer-family device is only a drop-in replacement when its electrical limits, pin assignment, peripheral behavior, clock tree, firmware assumptions, and qualification requirements have all been reviewed against the original design.
直接替換替代品,適用於 STM32F031G6U6 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: STM32F031G6U6 (相同外形與佔位) — 差異在於 Package, Core, Product Type, Flash Memory, Maximum CPU Frequency.
STM32G031G6U6
✅ 直接替換聯絡詢價
查看資料表 →HK32F031G6U6
✅ 直接替換📋 參考替代品(不在目錄中)
STM32F031G6U6 最大額定值與電氣特性
| Product Type | 32-bit ARM Cortex-M0 RISC microcontroller |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 32 KB (32K x 8 bits) |
| SRAM | 4 KB |
| Operating Voltage Range | 2.0 V to 3.6 V |
| ADC Resolution | 12 bits |
| ADC Quantity | 1 |
| Timer Quantity | 9 |
| I2C Interface Quantity | 1 |
| SPI/I2S Interface Quantity | 1 |
| USART Quantity | 1 |
| Processor Architecture | 32-bit RISC |
| Core | Arm Cortex-M0 |
| 封裝 | UFQFPN-28 (4 x 4 mm) |
| 安裝類型 | Surface mount |
| Packaging Form | Tray |
STM32F031G6U6 ufqfpn-28 (4 x 4 mm) 腳位配置指南
STM32F031G6U6(ufqfpn-28 (4 x 4 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: STM32F031G6U6.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM32F031G6U6 適用於 6 應用s: Environmental Sensor Hubs, Compact Motor Control, Digital Control Panels, Serial Communication Modules, Battery-Powered Sensor Nodes, Compact Industrial Control.
Environmental Sensor Hubs
The STM32F031G6U6 fits compact environmental-monitoring products that combine several low-speed sensors with local data processing. Its one I2C interface can connect addressable temperature, humidity, pressure, or gas sensors, while the 48 MHz Cortex-M0 core handles acquisition logic and filtering between samples. The 32 KB Flash and 4 KB SRAM provide space for firmware, calibration tables, and a modest communication buffer. A designer should keep analog sensor traces away from digital switching paths and verify that the selected sensor voltage levels match the MCU's 2.0 V to 3.6 V operating range.
Compact Motor Control
The STM32F031G6U6 can serve as the control processor in small fans, pumps, valves, and actuator modules where its nine timers provide multiple timing and PWM resources. The 48 MHz Cortex-M0 core executes control logic and commutation routines, while the USART supports configuration and diagnostics. At 32 KB of Flash and 4 KB of SRAM, the device is appropriate for focused control firmware rather than elaborate graphics or large protocol stacks. Power-stage layout and transient protection must be designed separately so motor noise does not compromise ADC measurements or digital supply stability.
Digital Control Panels
A human-interface or equipment-control panel can use the STM32F031G6U6 to scan inputs, update indicators, enforce timing, and communicate with a host. Its nine timers support debouncing, periodic scanning, and output timing, while USART provides a simple command link. The 12-bit ADC can monitor panel-supply voltage or analog set points when conditioned appropriately. The 4 x 4 mm UFQFPN package supports compact assemblies, but exposed-pad layout and thermal performance should follow the manufacturer land pattern and assembly guidance.
Serial Communication Modules
The STM32F031G6U6 is appropriate for gateways, remote controls, and protocol converters requiring one asynchronous and one synchronous serial channel. USART can connect a host, radio, or service interface, while SPI or I2S supports a higher-speed peripheral or digital-audio path. The Cortex-M0 core at up to 48 MHz can perform framing, buffering, and protocol conversion without an external processor. Firmware designers should confirm the alternate-function mapping for the selected UFQFPN pins and validate timing margins under the maximum intended baud rate.
Battery-Powered Sensor Nodes
The STM32F031G6U6 can form the core of a compact battery-powered sensing node where limited memory and a broad 2.0 V to 3.6 V supply range are useful. Its timer resources support wake intervals and duty-cycled measurements, while the I2C interface can connect low-power sensors. Low-power performance, reset behavior, and analog accuracy must be characterized under the intended operating conditions because the core frequency alone does not determine standby consumption. The regulator, sensor, and RF subsystem should be coordinated to avoid rail transients during transmit or measurement events.
Compact Industrial Control
The STM32F031G6U6 is suitable for small industrial modules that monitor analog quantities and operate discrete outputs. One 12-bit ADC measures conditioned process signals, nine timers coordinate update rates and PWM outputs, and USART provides diagnostic access. The 32 KB Flash and 4 KB SRAM are adequate for a focused supervisory loop but require disciplined buffer sizing and code organization. Industrial implementations should add appropriate input protection, grounding, isolation or surge controls where required, and verify environmental operating limits against the manufacturer documentation.
工程參考資料,適用於 STM32F031G6U6 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | STM32G031G6U6 | HK32F031G6U6 |
|---|---|---|---|
| Manufacturer | STMicroelectronics | STMicroelectronics | HK32 |
| Package | UFQFPN-28 (4 x 4 mm) | UFQFPN-28 (4 x 4 mm) | UFQFPN-28 (4 x 4 mm) |
主要差異化特點
- Established STM32F0 Cortex-M0 platform with 32 KB Flash and 4 KB SRAM (對比STM32G031G6U6)
- Documented cross-brand compatibility path on the same 28-pin footprint (對比HK32F031G6U6)
- Balanced peripheral set for compact embedded-control designs (對比STM32G031G6U6)
設計說明
Use the manufacturer land pattern for the 28-pin UFQFPN and preserve its exposed-pad requirements. Place input and output decoupling capacitors close to the corresponding power pins, keep the exposed-pad connection consistent with the package drawing, and inspect the assembly stencil and paste design before production. The compact 4 x 4 mm outline saves area but leaves little tolerance for copper and solder-process variation.
Keep analog-input traces short and separated from switching and high-current return paths. Use a disciplined ground strategy so ADC reference and sensor returns do not share noisy current paths with digital outputs. Validate the ADC network with the source impedance and acquisition timing in mind; the integrated 12-bit converter does not remove the need for input conditioning, reference stability, and careful routing.
Do not treat a shared package as proof of drop-in equivalence. For STM32G031G6U6, confirm Cortex-M0+ behavior, peripheral mapping, clock configuration, startup code, and electrical limits. For HK32F031G6U6, the cross-reference specifically identifies ADC, clock, and low-power behavior for sample testing. Review the exact schematic pin assignments and complete firmware requirements before releasing either substitution to production.
Design the supply for the MCU's 2.0 V to 3.6 V operating range and verify startup and brownout behavior across the complete input range. Because the device combines digital control and an analog converter, evaluate supply ripple, reference settling, and transient response rather than checking only the nominal voltage. Use the manufacturer guidance for decoupling and analog reference connections, and include controlled test points for debugging.
合規資訊
Compliance declarations were not identified in the manufacturer or distributor material for this exact orderable MPN. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status with the manufacturer before using the part in a regulated production program.