STM32F479BIT6 - 180MHz Cortex-M4 2MB MCU | STMicroelectronics
MPN: STM32F479BIT6 ✓ 啟用中STM32F479BIT6 概覽
An ARM Cortex-M4 microcontroller is a 32-bit reduced-instruction-set controller built around the ARM Cortex-M4 processor core. Within the device hierarchy, it combines the MCU with flash memory, SRAM, clocks, communications peripherals, and digital interfaces on one integrated circuit. The STM32F479BIT6 adds DSP and floating-point processing capabilities to the Cortex-M4 architecture, making it suitable for real-time control systems that require substantial processing throughput.
The principal device attributes include a 180MHz operating frequency, 2MB of flash memory, a 28-bit-wide memory organization, and a 208-pin LQFP package. Manufacturer listings identify 1.8V, 2.5V, and 3.3V operating conditions. These characteristics place the part in the STM32F4 advanced-performance line, where designers can balance high processing speed with a broad selection of embedded peripherals and package options.
The Cortex-M4 core supports digital signal processing and floating-point arithmetic, enabling efficient implementation of filtering, control, communications, and sensor-processing algorithms. Its flash capacity provides room for a bootloader, application firmware, configuration data, and supporting libraries. The large 208-pin package also exposes substantially more I/O and peripheral connections than smaller 48-pin or 64-pin MCUs, although its 28mm by 28mm footprint requires more board area than compact LQFP packages.
Typical uses include industrial automation, medical equipment, communications infrastructure, audio and signal-processing control, and connected embedded products. The combination of processing speed and I/O availability is useful when a system needs multiple external interfaces, local data acquisition, and deterministic real-time control without using a more complex application processor.
PCB design should account for the package dimensions, exposed lead pitch, decoupling requirements, clock routing, and high-speed signal integrity. A manufacturer datasheet and its reference design should be used for pin assignment, power sequencing, peripheral multiplexing, and firmware initialization rather than inferring behavior from the package family.
This product page combines the confirmed Cortex-M4, 180MHz, and 2MB flash characteristics with package-specific sourcing information, application guidance, compatibility considerations, and engineering design notes. It is intended to support initial device selection before the complete manufacturer documentation is reviewed for production design.
直接替換替代品,適用於 STM32F479BIT6 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: STM32F479BIT6 (相同外形與佔位) — 差異在於 Package.
此產品無可直接替換的替代品。
申請替代品STM32F479BIT6 最大額定值與電氣特性
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Processor Core | ARM Cortex-M4 |
| Architecture | ARM 32-bit RISC |
| Maximum CPU Frequency | 180 MHz |
| Flash Memory | 2 MB |
| Flash Organization | 2M x 8 bits |
| 封裝 | 208-pin LQFP, 28 mm x 28 mm |
| 安裝類型 | Surface mount |
| 供應電壓 | 1.8 V, 2.5 V, or 3.3 V |
| Digital Signal Processing Support | Yes |
| Floating-Point Unit | Yes |
| Product Line | STM32F4 high-performance advanced line |
| Shipping Format | Tray |
STM32F479BIT6 208-pin lqfp, 28 mm x 28 mm 腳位配置指南
STM32F479BIT6(208-pin lqfp, 28 mm x 28 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: STM32F479BIT6.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM32F479BIT6 適用於 6 應用s: Industrial Automation Controllers, Medical and Diagnostic Equipment, Communications Equipment, Audio and Signal Processing, Data Acquisition Systems, Connected Embedded Products.
Industrial Automation Controllers
The STM32F479BIT6 fits industrial automation controllers that need real-time control, extensive peripheral connectivity, and substantial local program storage. Its 180MHz ARM Cortex-M4 core can execute DSP and floating-point routines while the 2MB flash accommodates control software, communications stacks, and diagnostic logic. The 208-pin LQFP provides many external signal connections, although the 28mm by 28mm footprint requires careful panel-planning and connector placement. Design the board around the manufacturer's reference layout, especially for supply decoupling, clock routing, communications isolation, and any external memory or fieldbus interfaces.
推薦
Medical and Diagnostic Equipment
The STM32F479BIT6 can support embedded medical and diagnostic equipment where deterministic signal processing and broad peripheral access are required. The Cortex-M4 DSP instructions and floating-point unit are useful for filtering and control calculations, while the 180MHz operating frequency supports responsive multitasking and data acquisition. The 2MB flash provides room for application code and protocol handlers. For medical use, engineers must still verify operating-temperature limits, electrical characteristics, external component selection, isolation strategy, and applicable product requirements in the complete manufacturer documentation.
推薦
Communications Equipment
The STM32F479BIT6 is suitable for communications equipment requiring high processing throughput, dedicated serial interfaces, and firmware capacity for protocol stacks. Running at up to 180MHz, its Cortex-M4 core can handle framing, buffering, filtering, and real-time control alongside network-facing tasks. The 2MB flash reduces the need for external program storage in moderate-size designs. The large 208-pin LQFP also permits multiple communications and service interfaces, but board-level signal integrity becomes increasingly important as Ethernet, USB, or other high-speed links are added.
推薦
Audio and Signal Processing
The STM32F479BIT6 supports audio and general signal-processing applications because its ARM Cortex-M4 core provides DSP instructions, floating-point arithmetic, and a maximum frequency of 180MHz. These capabilities are appropriate for real-time filtering, mixing control, sampling coordination, and programmable signal conditioning. Two megabytes of flash can hold DSP code, control firmware, and parameter tables, while the 208-pin package exposes a broad set of digital and analog-adjacent peripherals. Performance depends on memory bandwidth, DMA behavior, peripheral clock configuration, and careful analog layout around the MCU.
推薦
Data Acquisition Systems
The STM32F479BIT6 is well matched to data-acquisition systems that combine multiple inputs, local processing, and control outputs. Its 180MHz Cortex-M4 core can sample, filter, and transform data before transmission, while the floating-point unit simplifies many numerical algorithms. The 2MB flash supports acquisition firmware, calibration tables, and protocol code, and the 208-pin package offers ample external connections for sensors and converters. Designers should allocate DMA channels carefully, account for analog and digital grounding, and follow timing requirements for each selected peripheral.
推薦
Connected Embedded Products
The STM32F479BIT6 can serve as the central controller in connected embedded products that need substantial application code and real-time peripheral handling. Its 2MB flash supports networking, configuration, update, and application layers, while the Cortex-M4 processing capability can share time among communications, user-interface control, and sensor management. The large LQFP package provides more I/O than compact MCU options, enabling several external sensors, transceivers, and local storage devices. Secure boot, firmware update, and peripheral clock configuration remain application-specific engineering responsibilities.
推薦
推薦產品摘要
工程參考資料,適用於 STM32F479BIT6 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Package | 208-pin LQFP, 28 mm x 28 mm |
| Brand | STMicroelectronics |
| Processor Core | ARM Cortex-M4 |
| Maximum CPU Frequency | 180 MHz |
| Flash Memory | 2 MB |
| Flash Organization | 2M x 8 bits |
| Supply Voltage | 1.8 V, 2.5 V, or 3.3 V |
| DSP and Floating-Point Support | Yes |
| Shipping Format | Tray |
主要差異化特點
- High processing throughput in a conventional MCU (對比STM32G474CET6)
- Large package for extensive external connectivity (對比STM32F479VIT6)
- Dedicated floating-point and DSP execution (對比STM32F479ZIT6)
設計說明
Use the manufacturer package drawing for the 208-pin LQFP footprint and verify body dimensions, lead span, pitch, and solder-mask land patterns against the selected PCB library. The package occupies 28mm by 28mm, so placement should account for assembly access, connector clearance, and routing channels. Do not substitute a smaller STM32F479 footprint: although some family members use the same Cortex-M4 core and flash capacity, their pin counts and board land patterns differ.
Decouple each applicable supply rail according to the manufacturer reference design, placing capacitors close to the associated VDD and VSS pins and minimizing loop area. The listed operating conditions include 1.8V, 2.5V, and 3.3V, but the complete minimum, maximum, and sequencing requirements must be taken from the electrical-characteristics tables. Check regulator stability, startup behavior, and the tolerance of every supply rail under maximum peripheral activity.
Route clock and high-speed communication signals with continuous reference planes, controlled return paths, and avoidance of unnecessary stubs. Verify peripheral alternate-function mappings, DMA ownership, and clock-tree settings in the firmware configuration. If the design includes external memory, fast serial links, or high-rate ADC capture, follow the manufacturer layout guidance and include measurement points so timing and signal integrity can be validated after fabrication.
合規資訊
No explicit compliance declarations for the exact STM32F479BIT6 orderable device were included in the available product information.