STMicroelectronics

STM32L152RCT6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics

부품 번호: STM32L152RCT6 ✓ 활성
64-LQFP (10 x 10 mm) Package 32 MHz Speed 256 KB (256K x 8) Memory
MOQ: 1 |

STM32L152RCT6 개요

STMicroelectronics STM32L152RCT6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M3 core, operating at up to 32 MHz with 256 KB of Flash memory in a 64-LQFP 10 x 10 mm package. The device integrates 32 KB SRAM, 8 KB EEPROM, USB, LCD, ADC, DAC, and three operational amplifiers for compact embedded designs.

An ultra-low-power microcontroller is an embedded semiconductor that balances processing capability, standby current, active current, and integrated peripherals to serve battery-powered and energy-conscious equipment. The STM32L1 series belongs to the Arm Cortex-M microcontroller family and combines general-purpose control, data acquisition, communications, and low-power operation in one package.

The STM32L152RCT6 provides 256 KB of Flash for firmware, 32 KB of SRAM for working memory, and 8 KB of EEPROM for nonvolatile data. Its 32 MHz Cortex-M3 core supports deterministic real-time control, while USB and LCD connectivity broaden its use in portable instruments, human-interface devices, and connected embedded products. Integrated ADC, DAC, and three op-amps reduce the need for external analog components.

The STM32L152 family combines conventional embedded-control capabilities with low-power operating modes suited to battery-operated equipment. Its integrated analog resources can support sensor conditioning, signal generation, and direct monitoring of physical inputs, while USB connectivity can simplify attachment to a host computer or USB-powered peripheral.

Typical uses include portable medical and industrial measurement equipment, USB-connected data loggers, compact human-interface panels, low-power sensor nodes, and general embedded-control boards. The 64-LQFP package provides enough I/O for mixed analog and digital designs while remaining compatible with standard surface-mount manufacturing.

When laying out the board, follow the manufacturer pin-definition and alternate-function tables, place decoupling capacitors close to the supply pins, and preserve the recommended analog-ground and USB-routing topology. Firmware replacement should also account for differences in clock setup, low-power modes, peripheral pin assignments, and USB initialization.

This page combines the STM32L152RCT6's core specifications with practical selection guidance, package considerations, and same-footprint replacement analysis for engineers evaluating 64-LQFP STM32L1 designs.

드롭인 대체품: STM32L152RCT6 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: STM32L152RCT6 (동일 폼 팩터 및 풋프린트) — 차이점: Flash Memory, Package, ADC, Communication Interfaces, Core.

STMicroelectronics
Flash Memory: 384 KB
Package: UFBGA-132 (7x7 mm)
ADC: 2x 12-bit, up to 1 Msps
비교 대상: STM32L152RCT6 →
STMicroelectronics
Flash Memory: 256 KB
Package: LQFP-64
Communication Interfaces: USART, SPI, I2C, USB
비교 대상: STM32L152RCT6 →

STM32L162RCT6

✅ 드롭인
STMicroelectronics
📦 64-LQFP (10 x 10 mm)
ARM Cortex-M3 · 32 MHz · 256 KB · 32 KB · 1.8 V to 3.6 V · LQFP-64 · -40C to +85C · 12-bit

✗ 재고 없음

$2.8636 / 개

데이터시트 보기 →

STM32L152RDT6

✅ 드롭인 ⚠️ 사양 미검증
📦 64-LQFP (10 x 10 mm)
Same 64-LQFP STM32L152 family footprint; Flash increases from 256 KB to 512 KB, a 100% increase

📋 참조 대체품 (카탈로그에 없음)

STM32L152RET6

✅ 드롭인 ⚠️ 사양 미검증
📦 64-LQFP (10 x 10 mm)
Same 64-LQFP STM32L152 family footprint; Flash increases from 256 KB to 512 KB, a 100% increase

📋 참조 대체품 (카탈로그에 없음)

STM32L152RBT6

✅ 드롭인 ⚠️ 사양 미검증
STMicroelectronics
📦 64-LQFP (10 x 10 mm)
32-bit ultra-low-power microcontroller · Arm Cortex-M3 · 32 MHz · 128 KB · 32 KB · 4 KB · Yes · Yes

가격 문의

데이터시트 보기 →

STM32L162RDT6

✅ 드롭인 ⚠️ 사양 미검증
📦 64-LQFP (10 x 10 mm)
Same 64-LQFP STM32L1 footprint and listed STM32L152 equivalence basis; Flash increases from 256 KB to 512 KB, a 100% increase

📋 참조 대체품 (카탈로그에 없음)

STM32L152RCT6 최대 정격 & 전기적 특성

Product Type 32-bit ultra-low-power microcontroller
CPU Core Arm Cortex-M3
Maximum CPU Frequency 32 MHz
Architecture 32-bit ARM
Flash Memory 256 KB (256K x 8)
SRAM 32 KB
EEPROM 8 KB
Integrated Connectivity USB and LCD
ADC Integrated
DAC Integrated
Operational Amplifiers 3 integrated
패키지 64-LQFP (10 x 10 mm)
핀 수 64 pins
실장 유형 Surface mount

STM32L152RCT6 64-lqfp (10 x 10 mm) 핀 구성 가이드

STM32L152RCT6(64-lqfp (10 x 10 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

STM32L152RCT6의 64-lqfp (10 x 10 mm) 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: STM32L152RCT6.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

STM32L152RCT6 적합 용도: 6 애플리케이션s: USB Connected Sensor Logger, Portable Medical Monitoring, Industrial Sensor Node, LCD Control Panel, Low-Power Data Acquisition System, USB Powered Test and Control Device.

🧩

USB Connected Sensor Logger

The STM32L152RCT6 fits portable data-acquisition equipment that must collect sensor data, retain configuration, and transfer records through USB. Its 32 MHz Arm Cortex-M3 core provides real-time control, while 256 KB of Flash holds application firmware and 8 KB of EEPROM preserves calibration or logging parameters. The integrated 12-bit-class ADC capability should be confirmed against the datasheet for the selected channel configuration, and the three internal operational amplifiers can assist with conditioning when their electrical limits are observed. USB removes the need for a separate communications IC, while the 64-LQFP package provides adequate GPIO for sensors, status indicators, and control outputs. The main design considerations are USB signal routing, supply decoupling, firmware support for the USB peripheral, and ensuring the chosen operating mode meets the logger's power budget.

💊

Portable Medical Monitoring

The STM32L152RCT6 supports compact monitoring instruments where low-power operation, mixed signal handling, and a conventional fine-pitch package are valuable. The 32 MHz Cortex-M3 core can process sensor information, the ADC supports analog measurement channels, and the DAC can generate test or control signals. The three integrated operational amplifiers may reduce the component count in suitable front-end designs, although medical designs must verify noise, accuracy, leakage, and isolation requirements against the manufacturer electrical characteristics. The 256 KB Flash and 32 KB SRAM are suitable for moderate embedded workloads without an external memory device. Battery operation also makes low-power state transitions central to the design. Confirm the applicable regulatory strategy, electrode protection network, calibration method, and isolation architecture before using this microcontroller in a medical product.

🏭

Industrial Sensor Node

The STM32L152RCT6 is appropriate for compact industrial monitoring modules that combine analog sensing, local control, and limited communications. Its 256 KB Flash and 32 KB SRAM provide space for protocol handling and application logic, while the integrated ADC reduces the need for a separate converter when the required resolution and sample rate are supported. The three operational amplifiers can support low-level sensor conditioning or output buffering within their stated limits. The 64-LQFP package exposes more I/O than a compact leadless MCU, making it useful for multiple digital inputs, relay-control outputs, status LEDs, and service interfaces. Industrial implementation should account for transient protection, grounding, calibration, watchdog strategy, and thermal performance. Because the target MPN does not include Ethernet, a higher-level gateway is required for networked plant data.

📺

LCD Control Panel

The STM32L152RCT6 can serve as the controller for a compact human-interface panel because it combines an LCD interface with a 32 MHz Cortex-M3 core and 64 GPIO in a 10 x 10 mm LQFP package. The LCD controller reduces the need for an external display driver, while the ADC and three op-amps can support touch or analog front-end functions when electrically appropriate. With 256 KB Flash and 32 KB SRAM, the device can manage display state, input handling, and application logic in one package. The LCD panel's logic levels, timing, contrast, and backlight requirements must be checked against the MCU specifications. Layout should separate analog and digital return paths, keep LCD and switching-node traces away from sensitive analog inputs, and follow the manufacturer's recommended capacitor placement. Firmware should also include conservative initialization delays and ESD protection appropriate to the enclosure and user interface.

🔧

Low-Power Data Acquisition System

The STM32L152RCT6 targets acquisition systems that alternate between active measurement and low-power storage to extend battery life. Its 32 MHz Cortex-M3 core is suitable for sampling control and local processing, while 256 KB Flash stores firmware and 8 KB EEPROM retains setup information. The integrated ADC and three op-amps can simplify a compact analog channel, provided the selected sampling regime stays within the ADC and amplifier limits. The MCU's low-power positioning is especially important for unattended field equipment because the duty cycle of the radio, display, or storage element can dominate total energy use. Firmware should disable unused peripherals, use the appropriate sleep and stop modes, and account for wake-up timing. Hardware validation should include brownout behavior, sensor-signal settling, capacitor selection, and measured sleep current rather than relying only on nominal catalog values.

⚡

USB Powered Test and Control Device

The STM32L152RCT6 is well matched to USB-powered test, programming, and control equipment where a single USB connection supplies both power and data. Its integrated USB controller removes a separate USB transceiver requirement, while the Cortex-M3 core runs at up to 32 MHz for control algorithms, protocol processing, and data capture. Integrated analog resources can support excitation, measurement, and output-loopback functions without requiring separate amplifiers in suitable designs. The 64-LQFP package gives the designer access to a broad GPIO set for fixture control, status indication, and programmable inputs. A robust design still needs input protection, controlled USB power-up behavior, accurate analog grounding, and firmware-managed overcurrent responses. Validate the selected USB speed and electrical requirements against the manufacturer documentation, and confirm that downstream test equipment can supply the current required during analog generation or output-driving operations.

What are the key specifications of STM32L152RCT6 that engineers should know?
The STM32L152RCT6 combines a 32 MHz Arm Cortex-M3 core with 256 KB of Flash, 32 KB of SRAM, and 8 KB of EEPROM in a 64-LQFP package. STMicroelectronics also integrates USB, LCD, ADC, DAC, and three operational amplifiers. According to the manufacturer product page, the device belongs to the STM32L152 ultra-low-power family and is intended for connected, low-power embedded applications.
What is the operating voltage of STM32L152RCT6?
The STM32L152RCT6 operates from the voltage range specified in the STM32L152RC electrical-characteristics table. The applicable minimum and maximum values depend on the selected power mode and are not reproduced in the product summary. Use the manufacturer datasheet's supply-voltage limits when designing the regulator and decoupling network for this 64-LQFP microcontroller.
Where can I download the STM32L152RCT6 datasheet PDF?
The official STM32L152RC product page provides access to the manufacturer documentation for the STM32L152RCT6, including the device datasheet, pin definitions, electrical characteristics, and application information. The part is identified as an Arm Cortex-M3 microcontroller with 256 KB Flash, 32 KB SRAM, 8 KB EEPROM, USB, LCD, ADC, DAC, and three op-amps in a 64-LQFP package.
Where can I find the STM32L152RCT6 pinout?
The STM32L152RCT6 pinout is defined by the STM32L152RC manufacturer datasheet and its pin-description tables. The package is a 64-LQFP 10 x 10 mm device with 64 numbered pins and an exposed ground pad. Use the datasheet tables to map power, ground, debug, clock, analog, LCD, and USB functions to the exact package pins before routing the PCB.
What is STM32L152RCT6 and what is it used for?
The STM32L152RCT6 is an ultra-low-power 32-bit Arm Cortex-M3 microcontroller with 256 KB Flash and a maximum CPU frequency of 32 MHz. Its integrated USB, LCD, ADC, DAC, and three operational amplifiers support measurement, control, user-interface, and host-connected designs. According to STMicroelectronics, these devices add USB connectivity to the STM32L1 low-power platform.
What memory does the STM32L152RCT6 contain?
The STM32L152RCT6 contains 256 KB of Flash configured as 256K x 8, together with 32 KB of SRAM and 8 KB of EEPROM. These figures match the manufacturer-family description associated with the exact device. Flash stores firmware and constants, SRAM supports runtime working state, and EEPROM provides nonvolatile storage for parameters that must survive power cycling.
How does STM32L152RCT6 compare with STM32L151RCT6?
Both parts use an Arm Cortex-M3 architecture and belong to the STM32L1 family, but the STM32L152RCT6 includes USB connectivity while the STM32L151RCT6 is identified as the variant without USB. The practical difference is therefore interface-dependent: a design using USB should retain the STM32L152RCT6 unless firmware and board wiring are redesigned.
Can STM32L162RCT6 replace STM32L152RCT6?
The STM32L162RCT6 is listed as a known equivalent for the STM32L152RCT6 and uses the same 64-LQFP class of package. Compatibility still depends on clock configuration, peripheral availability, memory mapping, and firmware support. Review the manufacturer comparison information before substituting it, particularly if the design relies on a peripheral unique to one family member.
When should I choose STM32L152RCT6 instead of STM32L151RCT6?
Choose the STM32L152RCT6 when the design requires USB connectivity in a compact 64-LQFP embedded controller. The STM32L152RCT6 adds USB to the common STM32L151RCT6 feature set while retaining a 32 MHz Arm Cortex-M3 core and 256 KB Flash. For designs that do not use USB, the STM32L151RCT6 may be a more appropriate choice after comparing peripheral availability.
What can replace STM32L152RCT6 on the same PCB footprint?
Several STM32L1-family devices use a compatible 64-LQFP footprint, including STM32L162RCT6 and Flash-size variants such as STM32L152RBT6 and STM32L152RDT6. Drop-in use still requires checking pin functions, power domains, memory size, peripheral differences, clock setup, and software support. The listed alternatives are footprint-compatible starting points rather than unconditional firmware substitutions.
Is STM32L152RCT6 suitable for a USB-connected sensor logger?
The STM32L152RCT6 is well suited to a USB-connected sensor logger because it integrates USB, a 32 MHz Cortex-M3 core, 256 KB Flash, 32 KB SRAM, ADC, and 8 KB EEPROM. Its 64-LQFP package also exposes substantially more I/O than a small leadless package. Validate USB impedance routing, supply requirements, and the selected low-power mode before finalizing the board.
What is the best GigaDevice equivalent for STM32L152RCT6?
No verified GigaDevice cross-reference was identified for the STM32L152RCT6, so a GigaDevice drop-in equivalent cannot be confirmed. The STM32L152RCT6 combines low-power operation with USB, LCD, an ADC, a DAC, and three integrated op-amps; matching only the Arm Cortex-M3 core and package is insufficient. Request a manufacturer-level compatibility review for any proposed cross-brand substitution.
Where to buy STM32L152RCT6 online?
Use the Request a Quote form on this page to ask for STM32L152RCT6 availability, current lead time, and minimum order quantity. The exact MPN is identified by STMicroelectronics as a 32 MHz Cortex-M3 microcontroller with 256 KB Flash in a 64-LQFP package. The quote team can confirm current sourcing status without relying on a static listing price.
What is the price of STM32L152RCT6?
The current STM32L152RCT6 price depends on quantity, lifecycle status, and supply conditions, so use the Request a Quote form on this page for a current quotation. The structured pricing area reflects qualifying market listings when available. For an exact procurement response, submit the required quantity, packaging preference, and target delivery location with the request.
Is STM32L152RCT6 in stock and what is its lead time?
Current stock and lead time for STM32L152RCT6 should be confirmed through the Request a Quote form on this page. STMicroelectronics lists the device through its STM32L152RC product family, while live inventory changes across distribution channels. Provide the required quantity and delivery schedule so procurement can return a meaningful availability commitment.

엔지니어링 참조 데이터: STM32L152RCT6 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the STM32L152RCT6 when a compact 64-LQFP controller needs a 32 MHz Arm Cortex-M3 core, 256 KB of Flash, USB, LCD, an ADC, a DAC, and three integrated operational amplifiers. It is a strong fit for connected instruments, sensor loggers, compact panels, and mixed-signal embedded products. Select STM32L162RCT6 when its device-specific peripheral set and software support better match the design, but verify the pin and peripheral differences before substitution. Use STM32L152RDT6 or STM32L152RET6 when the additional Flash capacity of 512 KB is valuable and the same STM32L152 family architecture is desired. Choose STM32L152RBT6 only when 128 KB is sufficient and reducing Flash capacity is acceptable. No verified cross-brand drop-in equivalent was identified; matching a Cortex-M3 core and 64-LQFP outline alone does not establish USB, analog, memory, clock, or firmware compatibility.

대체품과의 비교

파라미터 이 제품 STM32L162RCT6 STM32L152RDT6 STM32L152RET6 STM32L152RBT6 STM32L162RDT6
Package 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm)
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
CPU Core Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3
Integrated Connectivity USB and LCD USB and LCD USB and LCD USB and LCD USB and LCD USB and LCD
Analog Resources ADC, DAC, and 3 op-amps ADC, DAC, and 3 op-amps ADC, DAC, and 3 op-amps ADC, DAC, and 3 op-amps ADC, DAC, and 3 op-amps ADC, DAC, and 3 op-amps

주요 차별점

  • Integration reduces external analog and USB component count (vs STM32L162RCT6)
  • Memory expansion path without changing the 64-LQFP footprint (vs STM32L152RDT6)
  • Direct fit for 256 KB firmware requirements (vs STM32L152RBT6)

설계 노트

Place every required supply bypass capacitor directly between the corresponding power pin and the nearest ground reference, with the shortest practical return path. Use the manufacturer pin-definition table to identify all supply, ground, analog, and USB connections. Avoid routing USB differential traces across split planes, and preserve the recommended controlled-impedance geometry. For mixed-signal designs, keep the ADC and operational-amplifier inputs away from LCD, USB, and digital clock nets.

Create the supply rail so its voltage and transient behavior satisfy every operating mode used by the STM32L152RCT6, including active, sleep, stop, and reset states. Confirm regulator headroom, capacitor voltage rating, startup sequencing, and brownout behavior against the manufacturer electrical characteristics. Do not infer permissible voltage limits from the 3.3 V logic level alone. Use the low-power-control firmware to gate unused analog blocks, USB, LCD, and peripherals rather than assuming all reset defaults minimize current consumption.

A 64-LQFP footprint match does not by itself guarantee a drop-in firmware replacement. Before using STM32L162RCT6 or another STM32L1 alternative, compare pin-by-pin alternate functions, memory mapping, clock-tree requirements, ADC channels, DAC availability, USB behavior, and low-power modes. Also verify that the alternative's Flash size meets the application binary size and that any startup code, linker script, and device-selection macro are updated for the new part number.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Compliance conclusions require the manufacturer declaration or product-page material for the exact orderable MPN.

관련 검색

stm32l152rct6 datasheet stm32l152rct6 buy online STM32L152RCT6 pinout STM32L152RCT6 datasheet pdf STM32L152RCT6 64-LQFP pinout STM32L152RCT6 equivalent STM32L152RCT6 replacement STM32L152RCT6 vs STM32L151RCT6 STM32L152RCT6 vs STM32L162RCT6 STM32L152RCT6 USB sensor logger STM32L152RCT6 32MHz 256KB STMicroelectronics STM32L152RCT6

관련 부품 & 용어

STMicroelectronics STM32L152RCT6 STM32L152RC STM32L152RDT6 STM32L152RET6 STM32L152RBT6 STM32L162RCT6 STM32L162RDT6 STM32L151RCT6 Arm Cortex-M3 STM32L1 ultra-low-power microcontroller 32-bit microcontroller embedded microcontroller semiconductor 64-LQFP LQFP package family surface mount 256 KB Flash 32 KB SRAM 8 KB EEPROM USB LCD controller ADC DAC operational amplifier
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기