TAS5010IPFB - 2-Channel Digital Audio PWM Processor | Texas Instruments
MPN: TAS5010IPFB ✓ 啟用中TAS5010IPFB 概覽
A digital audio PWM processor is an audio signal-processing IC that accepts digital audio data and generates the control signals required by a true-digital class-D amplifier architecture. Within the product hierarchy, it belongs to digital audio processors, audio signal processors, and integrated circuits for consumer and industrial audio equipment. Its role is to translate incoming digital audio streams into precise timing and modulation information for the power stage while preserving signal integrity at the speaker output.
The principal benefits of the TAS5010IPFB include true-digital amplification, two-channel processing, a 96 dB device dynamic range, and 0.08% total harmonic distortion plus noise at 1 kHz. These characteristics support high-fidelity digital amplification designs where low distortion and consistent channel behavior are important. The 48-TQFP package provides a surface-mount solution suitable for compact audio boards, sound bars, active speakers, and powered speaker modules.
The device separates digital signal processing from the analog output stage. Its digital control architecture reduces the influence of analog input errors and supports reproducible performance across multiple units. In a typical implementation, the TAS5010IPFB receives digital audio samples from a source or audio codec, performs volume and signal control, and generates the required PWM information for a connected amplifier output stage. Speaker performance still depends on the external power devices, output filters, supply design, and PCB implementation.
Typical applications include active loudspeakers, compact consumer audio systems, multimedia speaker systems, sound-bar speaker channels, and powered home-theater speakers. The device is particularly relevant to multichannel designs because each channel requires consistent digital timing and modulation, while the 7 mm by 7 mm package keeps the controller compact beside discrete amplifier output stages.
A critical design consideration is keeping digital clock, data, ground, and power-distribution connections clean because timing errors can appear as audible artifacts. Place the device close to the associated output-control circuitry and follow the decoupling and layout guidance in the manufacturer datasheet when assigning board traces.
This page organizes the device specifications, verified drop-in replacements, application guidance, package information, and design notes into one engineering reference. It also highlights the parameters that should be checked during PCB redesign, sourcing, and second-source qualification.
直接替換替代品,適用於 TAS5010IPFB — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: TAS5010IPFB (相同外形與佔位) — 差異在於 Package.
TAS5010IPFBRG4
✅ 直接替換📋 參考替代品(不在目錄中)
TAS5010IPFBG4
✅ 直接替換📋 參考替代品(不在目錄中)
TAS5010IPFB 最大額定值與電氣特性
| Product Type | Digital audio PWM processor |
| Channel Count | 2 channels |
| Device Dynamic Range | 96 dB |
| THD+N | 0.08% at 1 kHz |
| Output Power Context | Up to 30 W RMS in the manufacturer test condition |
| 封裝 | 48-pin TQFP, 7 mm x 7 mm |
| 安裝類型 | Surface mount |
| PWM Interface | Digital audio PWM modulation |
TAS5010IPFB 48-pin tqfp, 7 mm x 7 mm 腳位配置指南
TAS5010IPFB(48-pin tqfp, 7 mm x 7 mm 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: TAS5010IPFB.
請參閱 資料表 以查看完整腳位配置。
典型應用
TAS5010IPFB 適用於 6 應用s: Active Stereo Speakers, Sound Bar Speaker Channels, Powered Home-Theater Speakers, Digital Audio Network Speakers, Multimedia Speaker Systems, Portable Battery-Powered Speakers.
Active Stereo Speakers
The TAS5010IPFB fits a two-channel active-speaker design in which one controller processes the left and right digital audio streams and coordinates the external PWM power stages. Its 96 dB device dynamic range and 0.08% THD+N at 1 kHz provide the headline performance figures for a compact premium speaker. Place the controller near the output-control circuitry and keep clock and data routes short. The final power capability is set by the external transistors, filters, supply rails, and thermal design rather than by the controller alone.
推薦
Sound Bar Speaker Channels
A sound bar can use the TAS5010IPFB as the digital modulation controller for dedicated left, right, or surround speaker channels. The 2-channel architecture simplifies control of a stereo pair, while 96 dB device dynamic range supports low-distortion playback through a true-digital amplification chain. Keep the digital audio source, TAS5010IPFB, and output-stage interfaces on controlled ground and power-distribution networks. Verify channel timing and filter design in the manufacturer reference circuit before scaling the design across multiple speakers.
推薦
Powered Home-Theater Speakers
The TAS5010IPFB is appropriate for powered home-theater speakers that receive digital audio from a central processor. Its digital PWM-processing role preserves a digital path from source to speaker control and provides documented device performance of 96 dB dynamic range and 0.08% THD+N at 1 kHz. The system designer still selects the power devices, output filters, and supply for the required channel power. Short digital traces, careful clock distribution, and a low-impedance ground plan are essential for consistent behavior across multiple amplifier channels.
推薦
Digital Audio Network Speakers
Network speakers benefit from the TAS5010IPFB because digital audio can remain in the digital domain until the true-digital amplifier stage. This architecture suits powered speakers connected through digital audio links, where predictable channel timing and low distortion are priorities. The 48-TQFP package keeps the controller compact enough for a constrained speaker enclosure, although heat is normally concentrated in the external power stage. Follow the manufacturer layout example to isolate the digital controller from high-current switching currents and speaker outputs.
推薦
Multimedia Speaker Systems
The TAS5010IPFB can serve as the audio modulation controller in compact multimedia speaker systems driven by USB, wireless, or other digital audio sources. Its two-channel capability supports a conventional stereo output arrangement, while the low THD+N target of 0.08% at 1 kHz suits reproducible sound reproduction. Design the external output stage for the required impedance and continuous power because those parameters are outside the controller. A clean separation between digital routing and power-stage return currents reduces the chance of audible interference.
推薦
Portable Battery-Powered Speakers
Battery-powered speakers can use the TAS5010IPFB when a compact digital amplification architecture is preferred. The controller's 48-pin TQFP package occupies only a 7 mm by 7 mm area, leaving board space for the power stage, filtering, and protection components. Because efficiency and heat depend mainly on the external power conversion and output devices, evaluate the complete channel design rather than assigning amplifier efficiency to the processor. Low-noise decoupling and short return paths are especially valuable when the system operates from a sensitive audio source.
推薦
推薦產品摘要
工程參考資料,適用於 TAS5010IPFB — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | TAS5010IPFBRG4 | TAS5010IPFBG4 |
|---|---|---|---|
| Package | 48-TQFP (7x7) | 48-TQFP (7x7) - same | 48-TQFP (7x7) - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | Digital audio PWM processor | Digital audio PWM processor | Digital audio PWM processor |
| Channel Count | 2 channels | 2 channels | 2 channels |
| Device Dynamic Range | 96 dB | 96 dB | 96 dB |
| THD+N | 0.08% at 1 kHz | 0.08% at 1 kHz | 0.08% at 1 kHz |
| Output Power Context | System measured up to 30 W RMS | System measured up to 30 W RMS | System measured up to 30 W RMS |
| Architecture | True-digital audio amplification | True-digital audio amplification | True-digital audio amplification |
主要差異化特點
- Documented complete replacement without PCB modification (對比TAS5010IPFBRG4)
- Second same-footprint sourcing option (對比TAS5010IPFBG4)
- True-digital modulation for reproducible channel behavior (對比TAS5010IPFBRG4)
設計說明
Route clock and digital audio lines as short, controlled-impedance paths and provide a continuous ground reference beneath them. High-current PWM and speaker outputs can induce voltage disturbances that appear in the digital audio path, so keep their return currents physically separated from the TAS5010IPFB ground connections. Place input, output, and bypass capacitors directly at their associated pins rather than relying on distant bulk capacitance.
The external output transistors and output-filter network determine usable speaker power, conversion efficiency, and thermal load; the 30 W RMS system figure is not a standalone IC output rating. Select the power stage for the required impedance, peak current, distortion target, and thermal rise. Use the manufacturer reference circuit to reproduce supply decoupling and component values before scaling to higher output power.
Do not treat TAS5010IPFB as a conventional analog audio amplifier or as a self-contained speaker driver. It is a digital audio PWM processor that requires compatible digital sources, correct clocking, and an external power stage. Confirm the interface format, supported sample rate, clock configuration, and channel mapping from the manufacturer datasheet before connecting a source or assigning PCB signal names.
Treat the clock as the highest-priority digital signal and avoid routing it parallel to PWM outputs or speaker nets for extended distances. If the enclosure or PCB is electrically noisy, use a solid ground-plane strategy, controlled return paths, and localized filtering at the interface. Validate the finished design for channel alignment, click artifacts, and data errors before production release.
合規資訊
Compliance declarations are not stated in the available product listings. Confirm RoHS, REACH, halogen-free, and conflict-minerals status from the current manufacturer product documentation before qualification.