TAS5010IPFB - 2-Channel Digital Audio PWM Processor | Texas Instruments
料号: TAS5010IPFB ✓ 量产中TAS5010IPFB 概述
A digital audio PWM processor is an audio signal-processing IC that accepts digital audio data and generates the control signals required by a true-digital class-D amplifier architecture. Within the product hierarchy, it belongs to digital audio processors, audio signal processors, and integrated circuits for consumer and industrial audio equipment. Its role is to translate incoming digital audio streams into precise timing and modulation information for the power stage while preserving signal integrity at the speaker output.
The principal benefits of the TAS5010IPFB include true-digital amplification, two-channel processing, a 96 dB device dynamic range, and 0.08% total harmonic distortion plus noise at 1 kHz. These characteristics support high-fidelity digital amplification designs where low distortion and consistent channel behavior are important. The 48-TQFP package provides a surface-mount solution suitable for compact audio boards, sound bars, active speakers, and powered speaker modules.
The device separates digital signal processing from the analog output stage. Its digital control architecture reduces the influence of analog input errors and supports reproducible performance across multiple units. In a typical implementation, the TAS5010IPFB receives digital audio samples from a source or audio codec, performs volume and signal control, and generates the required PWM information for a connected amplifier output stage. Speaker performance still depends on the external power devices, output filters, supply design, and PCB implementation.
Typical applications include active loudspeakers, compact consumer audio systems, multimedia speaker systems, sound-bar speaker channels, and powered home-theater speakers. The device is particularly relevant to multichannel designs because each channel requires consistent digital timing and modulation, while the 7 mm by 7 mm package keeps the controller compact beside discrete amplifier output stages.
A critical design consideration is keeping digital clock, data, ground, and power-distribution connections clean because timing errors can appear as audible artifacts. Place the device close to the associated output-control circuitry and follow the decoupling and layout guidance in the manufacturer datasheet when assigning board traces.
This page organizes the device specifications, verified drop-in replacements, application guidance, package information, and design notes into one engineering reference. It also highlights the parameters that should be checked during PCB redesign, sourcing, and second-source qualification.
直接替换替代料: TAS5010IPFB ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: TAS5010IPFB (相同外形与封装尺寸) ——差异在于 Package.
TAS5010IPFBRG4
✅ 直接替换📋 参考替代料(不在目录中)
TAS5010IPFBG4
✅ 直接替换📋 参考替代料(不在目录中)
TAS5010IPFB 最大额定值与电气特性
| Product Type | Digital audio PWM processor |
| Channel Count | 2 channels |
| Device Dynamic Range | 96 dB |
| THD+N | 0.08% at 1 kHz |
| Output Power Context | Up to 30 W RMS in the manufacturer test condition |
| 封装 | 48-pin TQFP, 7 mm x 7 mm |
| 安装类型 | Surface mount |
| PWM Interface | Digital audio PWM modulation |
TAS5010IPFB 48-pin tqfp, 7 mm x 7 mm 引脚配置指南
TAS5010IPFB(48-pin tqfp, 7 mm x 7 mm 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: TAS5010IPFB.
请参阅 数据手册 以查看完整引脚配置。
典型应用
TAS5010IPFB 适用于 6 应用s: Active Stereo Speakers, Sound Bar Speaker Channels, Powered Home-Theater Speakers, Digital Audio Network Speakers, Multimedia Speaker Systems, Portable Battery-Powered Speakers.
Active Stereo Speakers
The TAS5010IPFB fits a two-channel active-speaker design in which one controller processes the left and right digital audio streams and coordinates the external PWM power stages. Its 96 dB device dynamic range and 0.08% THD+N at 1 kHz provide the headline performance figures for a compact premium speaker. Place the controller near the output-control circuitry and keep clock and data routes short. The final power capability is set by the external transistors, filters, supply rails, and thermal design rather than by the controller alone.
推荐
Sound Bar Speaker Channels
A sound bar can use the TAS5010IPFB as the digital modulation controller for dedicated left, right, or surround speaker channels. The 2-channel architecture simplifies control of a stereo pair, while 96 dB device dynamic range supports low-distortion playback through a true-digital amplification chain. Keep the digital audio source, TAS5010IPFB, and output-stage interfaces on controlled ground and power-distribution networks. Verify channel timing and filter design in the manufacturer reference circuit before scaling the design across multiple speakers.
推荐
Powered Home-Theater Speakers
The TAS5010IPFB is appropriate for powered home-theater speakers that receive digital audio from a central processor. Its digital PWM-processing role preserves a digital path from source to speaker control and provides documented device performance of 96 dB dynamic range and 0.08% THD+N at 1 kHz. The system designer still selects the power devices, output filters, and supply for the required channel power. Short digital traces, careful clock distribution, and a low-impedance ground plan are essential for consistent behavior across multiple amplifier channels.
推荐
Digital Audio Network Speakers
Network speakers benefit from the TAS5010IPFB because digital audio can remain in the digital domain until the true-digital amplifier stage. This architecture suits powered speakers connected through digital audio links, where predictable channel timing and low distortion are priorities. The 48-TQFP package keeps the controller compact enough for a constrained speaker enclosure, although heat is normally concentrated in the external power stage. Follow the manufacturer layout example to isolate the digital controller from high-current switching currents and speaker outputs.
推荐
Multimedia Speaker Systems
The TAS5010IPFB can serve as the audio modulation controller in compact multimedia speaker systems driven by USB, wireless, or other digital audio sources. Its two-channel capability supports a conventional stereo output arrangement, while the low THD+N target of 0.08% at 1 kHz suits reproducible sound reproduction. Design the external output stage for the required impedance and continuous power because those parameters are outside the controller. A clean separation between digital routing and power-stage return currents reduces the chance of audible interference.
推荐
Portable Battery-Powered Speakers
Battery-powered speakers can use the TAS5010IPFB when a compact digital amplification architecture is preferred. The controller's 48-pin TQFP package occupies only a 7 mm by 7 mm area, leaving board space for the power stage, filtering, and protection components. Because efficiency and heat depend mainly on the external power conversion and output devices, evaluate the complete channel design rather than assigning amplifier efficiency to the processor. Low-noise decoupling and short return paths are especially valuable when the system operates from a sensitive audio source.
推荐
推荐产品汇总
工程参考数据: TAS5010IPFB ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | TAS5010IPFBRG4 | TAS5010IPFBG4 |
|---|---|---|---|
| Package | 48-TQFP (7x7) | 48-TQFP (7x7) - same | 48-TQFP (7x7) - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | Digital audio PWM processor | Digital audio PWM processor | Digital audio PWM processor |
| Channel Count | 2 channels | 2 channels | 2 channels |
| Device Dynamic Range | 96 dB | 96 dB | 96 dB |
| THD+N | 0.08% at 1 kHz | 0.08% at 1 kHz | 0.08% at 1 kHz |
| Output Power Context | System measured up to 30 W RMS | System measured up to 30 W RMS | System measured up to 30 W RMS |
| Architecture | True-digital audio amplification | True-digital audio amplification | True-digital audio amplification |
关键差异点
- Documented complete replacement without PCB modification (对比 TAS5010IPFBRG4)
- Second same-footprint sourcing option (对比 TAS5010IPFBG4)
- True-digital modulation for reproducible channel behavior (对比 TAS5010IPFBRG4)
设计说明
Route clock and digital audio lines as short, controlled-impedance paths and provide a continuous ground reference beneath them. High-current PWM and speaker outputs can induce voltage disturbances that appear in the digital audio path, so keep their return currents physically separated from the TAS5010IPFB ground connections. Place input, output, and bypass capacitors directly at their associated pins rather than relying on distant bulk capacitance.
The external output transistors and output-filter network determine usable speaker power, conversion efficiency, and thermal load; the 30 W RMS system figure is not a standalone IC output rating. Select the power stage for the required impedance, peak current, distortion target, and thermal rise. Use the manufacturer reference circuit to reproduce supply decoupling and component values before scaling to higher output power.
Do not treat TAS5010IPFB as a conventional analog audio amplifier or as a self-contained speaker driver. It is a digital audio PWM processor that requires compatible digital sources, correct clocking, and an external power stage. Confirm the interface format, supported sample rate, clock configuration, and channel mapping from the manufacturer datasheet before connecting a source or assigning PCB signal names.
Treat the clock as the highest-priority digital signal and avoid routing it parallel to PWM outputs or speaker nets for extended distances. If the enclosure or PCB is electrically noisy, use a solid ground-plane strategy, controlled return paths, and localized filtering at the interface. Validate the finished design for channel alignment, click artifacts, and data errors before production release.
合规信息
Compliance declarations are not stated in the available product listings. Confirm RoHS, REACH, halogen-free, and conflict-minerals status from the current manufacturer product documentation before qualification.