Texas Instruments

TAS5010IPFB - 2-Channel Digital Audio PWM Processor | Texas Instruments

부품 번호: TAS5010IPFB ✓ 활성
48-pin TQFP, 7 mm x 7 mm Package
MOQ: 1 |

TAS5010IPFB 개요

The Texas Instruments TAS5010IPFB is a 2-channel digital audio PWM processor for true-digital audio amplifier designs, delivering a 96 dB device dynamic range and 0.08% THD+N at 1 kHz. The processor is packaged in a 48-pin TQFP measuring 7 mm by 7 mm.

A digital audio PWM processor is an audio signal-processing IC that accepts digital audio data and generates the control signals required by a true-digital class-D amplifier architecture. Within the product hierarchy, it belongs to digital audio processors, audio signal processors, and integrated circuits for consumer and industrial audio equipment. Its role is to translate incoming digital audio streams into precise timing and modulation information for the power stage while preserving signal integrity at the speaker output.

The principal benefits of the TAS5010IPFB include true-digital amplification, two-channel processing, a 96 dB device dynamic range, and 0.08% total harmonic distortion plus noise at 1 kHz. These characteristics support high-fidelity digital amplification designs where low distortion and consistent channel behavior are important. The 48-TQFP package provides a surface-mount solution suitable for compact audio boards, sound bars, active speakers, and powered speaker modules.

The device separates digital signal processing from the analog output stage. Its digital control architecture reduces the influence of analog input errors and supports reproducible performance across multiple units. In a typical implementation, the TAS5010IPFB receives digital audio samples from a source or audio codec, performs volume and signal control, and generates the required PWM information for a connected amplifier output stage. Speaker performance still depends on the external power devices, output filters, supply design, and PCB implementation.

Typical applications include active loudspeakers, compact consumer audio systems, multimedia speaker systems, sound-bar speaker channels, and powered home-theater speakers. The device is particularly relevant to multichannel designs because each channel requires consistent digital timing and modulation, while the 7 mm by 7 mm package keeps the controller compact beside discrete amplifier output stages.

A critical design consideration is keeping digital clock, data, ground, and power-distribution connections clean because timing errors can appear as audible artifacts. Place the device close to the associated output-control circuitry and follow the decoupling and layout guidance in the manufacturer datasheet when assigning board traces.

This page organizes the device specifications, verified drop-in replacements, application guidance, package information, and design notes into one engineering reference. It also highlights the parameters that should be checked during PCB redesign, sourcing, and second-source qualification.

드롭인 대체품: TAS5010IPFB — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: TAS5010IPFB (동일 폼 팩터 및 풋프린트) — 차이점: Package.

Texas Instruments
Package: 48-pin TQFP (7 x 7 mm)
비교 대상: TAS5010IPFB →

TAS5010IPFBRG4

✅ 드롭인
📦 48-TQFP (7x7)
No quantified electrical-rating difference; terminals, package, performance parameters, and functional characteristics are consistent

📋 참조 대체품 (카탈로그에 없음)

TAS5010IPFBG4

✅ 드롭인
📦 48-TQFP (7x7)
No quantified electrical-rating difference; terminals, package, performance parameters, and functional characteristics are consistent

📋 참조 대체품 (카탈로그에 없음)

TAS5010IPFB 최대 정격 & 전기적 특성

Product Type Digital audio PWM processor
Channel Count 2 channels
Device Dynamic Range 96 dB
THD+N 0.08% at 1 kHz
Output Power Context Up to 30 W RMS in the manufacturer test condition
패키지 48-pin TQFP, 7 mm x 7 mm
실장 유형 Surface mount
PWM Interface Digital audio PWM modulation

TAS5010IPFB 48-pin tqfp, 7 mm x 7 mm 핀 구성 가이드

TAS5010IPFB(48-pin tqfp, 7 mm x 7 mm 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

TAS5010IPFB의 48-pin tqfp, 7 mm x 7 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: TAS5010IPFB.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

TAS5010IPFB 적합 용도: 6 애플리케이션s: Active Stereo Speakers, Sound Bar Speaker Channels, Powered Home-Theater Speakers, Digital Audio Network Speakers, Multimedia Speaker Systems, Portable Battery-Powered Speakers.

🎧

Active Stereo Speakers

The TAS5010IPFB fits a two-channel active-speaker design in which one controller processes the left and right digital audio streams and coordinates the external PWM power stages. Its 96 dB device dynamic range and 0.08% THD+N at 1 kHz provide the headline performance figures for a compact premium speaker. Place the controller near the output-control circuitry and keep clock and data routes short. The final power capability is set by the external transistors, filters, supply rails, and thermal design rather than by the controller alone.

🔊

Sound Bar Speaker Channels

A sound bar can use the TAS5010IPFB as the digital modulation controller for dedicated left, right, or surround speaker channels. The 2-channel architecture simplifies control of a stereo pair, while 96 dB device dynamic range supports low-distortion playback through a true-digital amplification chain. Keep the digital audio source, TAS5010IPFB, and output-stage interfaces on controlled ground and power-distribution networks. Verify channel timing and filter design in the manufacturer reference circuit before scaling the design across multiple speakers.

🏠

Powered Home-Theater Speakers

The TAS5010IPFB is appropriate for powered home-theater speakers that receive digital audio from a central processor. Its digital PWM-processing role preserves a digital path from source to speaker control and provides documented device performance of 96 dB dynamic range and 0.08% THD+N at 1 kHz. The system designer still selects the power devices, output filters, and supply for the required channel power. Short digital traces, careful clock distribution, and a low-impedance ground plan are essential for consistent behavior across multiple amplifier channels.

🌐

Digital Audio Network Speakers

Network speakers benefit from the TAS5010IPFB because digital audio can remain in the digital domain until the true-digital amplifier stage. This architecture suits powered speakers connected through digital audio links, where predictable channel timing and low distortion are priorities. The 48-TQFP package keeps the controller compact enough for a constrained speaker enclosure, although heat is normally concentrated in the external power stage. Follow the manufacturer layout example to isolate the digital controller from high-current switching currents and speaker outputs.

💻

Multimedia Speaker Systems

The TAS5010IPFB can serve as the audio modulation controller in compact multimedia speaker systems driven by USB, wireless, or other digital audio sources. Its two-channel capability supports a conventional stereo output arrangement, while the low THD+N target of 0.08% at 1 kHz suits reproducible sound reproduction. Design the external output stage for the required impedance and continuous power because those parameters are outside the controller. A clean separation between digital routing and power-stage return currents reduces the chance of audible interference.

🔋

Portable Battery-Powered Speakers

Battery-powered speakers can use the TAS5010IPFB when a compact digital amplification architecture is preferred. The controller's 48-pin TQFP package occupies only a 7 mm by 7 mm area, leaving board space for the power stage, filtering, and protection components. Because efficiency and heat depend mainly on the external power conversion and output devices, evaluate the complete channel design rather than assigning amplifier efficiency to the processor. Low-noise decoupling and short return paths are especially valuable when the system operates from a sensitive audio source.

What is the Texas Instruments TAS5010IPFB?
The Texas Instruments TAS5010IPFB is a 2-channel digital audio PWM processor for true-digital audio amplifier designs. It operates from digital audio data and generates the modulation information used by the external amplifier power stage. According to the manufacturer datasheet, the device provides 96 dB dynamic range and 0.08% THD+N at 1 kHz. It is offered in a 48-pin TQFP package measuring 7 mm by 7 mm.
What are the key specifications of TAS5010IPFB that engineers should know?
The key TAS5010IPFB specifications are 2-channel processing, 96 dB device dynamic range, and 0.08% THD+N at 1 kHz. The manufacturer also characterizes the device in a system measured at the speaker terminals with up to 30 W RMS. The IC uses a 48-pin TQFP package with a 7 mm by 7 mm footprint. Use the datasheet for supply voltage, clock, serial-interface, and absolute-maximum ratings.
Where can I download the TAS5010IPFB datasheet PDF?
The TAS5010IPFB datasheet can be obtained from the Texas Instruments product documentation or from the PDF mirror listed on this page. The manufacturer datasheet is the authoritative source for the pin configuration, electrical characteristics, application circuit, and timing requirements. The datasheet mirror is available at https://pdf.digi-electronics.com/pdf/2579/TAS5010IPFB-datasheet.pdf, while the manufacturer PDF is linked directly from the datasheet field on this page.
Where can I find the TAS5010IPFB pinout?
The TAS5010IPFB pinout is found in the pin-configuration section of the manufacturer datasheet. The device uses a 48-pin TQFP package, and the pin-description table should be used to assign clock, data, control, supply, and ground connections. Because individual signal names cannot be confirmed from the available listing text, this page does not reproduce a potentially misleading pin list.
What is the difference between TAS5010IPFB and TAS5010IPFBRG4?
The TAS5010IPFBRG4 is identified as a complete replacement for the TAS5010IPFB because the terminals, packages, main performance parameters, and functional characteristics are consistent. Both use the same 48-TQFP footprint, and the available comparison reports no quantified change in the key electrical ratings. The order suffix differs, so procurement should confirm the required suffix against the BOM and the manufacturer order information.
Can TAS5010IPFBRG4 replace TAS5010IPFB without a PCB change?
Yes, the TAS5010IPFBRG4 can serve as a drop-in replacement for the TAS5010IPFB because the package terminals and functional characteristics are consistent. Both devices use the same 48-pin TQFP footprint, allowing the replacement to be placed on the existing land pattern. Confirm the order suffix and production requirements in the manufacturer documentation before releasing a production purchase order.
What is the best drop-in replacement for TAS5010IPFB?
The TAS5010IPFBRG4 is the best directly documented drop-in replacement for the TAS5010IPFB because the comparison identifies consistent terminals, packages, performance parameters, and functional characteristics. It uses the same 48-TQFP package and does not require PCB changes. The TAS5010IPFBG4 is also reported as a functionally and physically consistent replacement and can be evaluated as a second sourcing option.
Is TAS5010IPFB suitable for powered speakers and sound bars?
Yes, the TAS5010IPFB suits powered speakers, sound-bar channels, and other true-digital amplification products. Its 2-channel architecture allows each device to control a stereo pair, while the 96 dB dynamic range and 0.08% THD+N at 1 kHz support high-fidelity audio targets. The external output transistors, filters, supplies, and speaker load determine the final amplifier performance.
When should I choose TAS5010IPFB instead of a conventional analog audio amplifier?
Choose the TAS5010IPFB when the design requires a true-digital signal path and digital PWM control rather than a conventional analog input amplifier. Its digital processing architecture supports repeatable channel behavior and direct use of digital audio sources. A conventional analog amplifier remains appropriate when the system already carries only analog audio and does not need digital volume, timing, or modulation control.
How do TAS5010IPFB and TAS5001IPFB compare?
The available comparison data places TAS5010IPFB and TAS5001IPFB in the same Texas Instruments audio-processor family, but it does not establish that the TAS5001IPFB is a pin-compatible drop-in replacement. The TAS5010IPFB is specifically documented as a 2-channel digital audio PWM processor with 96 dB device dynamic range. Confirm package pins, interface timing, and electrical limits in the manufacturer datasheet before considering it as a substitute.
What is the best Texas Instruments equivalent for TAS5010IPFB?
The best documented Texas Instruments equivalent is the TAS5010IPFBRG4, which is described as a complete replacement with consistent terminals, packages, performance parameters, and functional characteristics. The TAS5010IPFBG4 is another consistent replacement option. Both preserve the 48-TQFP footprint, but procurement and engineering teams should verify the exact order suffix against the BOM and qualification requirements.
Does the TAS5010IPFB include the speaker output amplifier stage?
The TAS5010IPFB is a digital audio PWM processor rather than a self-contained speaker-output power amplifier. It processes digital audio and generates the control information for the external amplifier stage. Designers still need discrete output devices, output filtering, power-supply components, and speaker-interface design. This division allows the power stage to be selected according to channel power, thermal limits, and speaker impedance.
How much power can the TAS5010IPFB audio system deliver?
The manufacturer characterizes a TAS5010-based system measured at the speaker terminals with performance up to 30 W RMS. That system result depends on the external amplifier power stage, output filter, supply, PCB layout, and speaker load; it is not a standalone output-power rating of the controller IC. Use the complete reference circuit in the datasheet when reproducing the test condition.
What layout practices matter for a TAS5010IPFB design?
Clock and digital data routing should be short, controlled, and referenced to a clean ground path because timing and modulation errors can become audible. Place decoupling capacitors close to the device pins and keep the high-current switching return path away from sensitive digital traces. Follow the PCB example and grounding arrangement in the manufacturer datasheet, especially around the 48-pin TQFP footprint.
Where can I buy TAS5010IPFB online and what is its current lead time?
Use the Request a Quote form on this page to ask for TAS5010IPFB availability, current lead time, minimum order quantity, and a formal quotation. The manufacturer and distributor listings confirm demand for the part, but current supply conditions can change by date, region, and order volume. Submit the required quantity, target date, and shipping destination with the quote request for a current response.

엔지니어링 참조 데이터: TAS5010IPFB — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the TAS5010IPFB when building a true-digital amplifier that requires two channels of digital PWM audio processing, with documented device performance of 96 dB dynamic range and 0.08% THD+N at 1 kHz. Select the TAS5010IPFBRG4 for procurement continuity because the cross-reference identifies consistent terminals, package, performance parameters, and functional characteristics. The TAS5010IPFBG4 provides a similar second-source option on the same 48-TQFP footprint. Both replacements avoid PCB changes, although the order suffix should be checked against procurement and qualification requirements. Do not substitute TAS5001IPFB or TDA7430 without verifying pin compatibility, digital-interface timing, supply requirements, and output-control architecture; their presence in comparison listings does not establish drop-in status. In every case, the external power transistors, output filters, supplies, speaker impedance, and thermal design determine much of the final audio-channel performance.

대체품과의 비교

파라미터 이 제품 TAS5010IPFBRG4 TAS5010IPFBG4
Package 48-TQFP (7x7) 48-TQFP (7x7) - same 48-TQFP (7x7) - same
Brand Texas Instruments Texas Instruments Texas Instruments
Product Type Digital audio PWM processor Digital audio PWM processor Digital audio PWM processor
Channel Count 2 channels 2 channels 2 channels
Device Dynamic Range 96 dB 96 dB 96 dB
THD+N 0.08% at 1 kHz 0.08% at 1 kHz 0.08% at 1 kHz
Output Power Context System measured up to 30 W RMS System measured up to 30 W RMS System measured up to 30 W RMS
Architecture True-digital audio amplification True-digital audio amplification True-digital audio amplification

주요 차별점

  • Documented complete replacement without PCB modification (vs TAS5010IPFBRG4)
  • Second same-footprint sourcing option (vs TAS5010IPFBG4)
  • True-digital modulation for reproducible channel behavior (vs TAS5010IPFBRG4)

설계 노트

Route clock and digital audio lines as short, controlled-impedance paths and provide a continuous ground reference beneath them. High-current PWM and speaker outputs can induce voltage disturbances that appear in the digital audio path, so keep their return currents physically separated from the TAS5010IPFB ground connections. Place input, output, and bypass capacitors directly at their associated pins rather than relying on distant bulk capacitance.

The external output transistors and output-filter network determine usable speaker power, conversion efficiency, and thermal load; the 30 W RMS system figure is not a standalone IC output rating. Select the power stage for the required impedance, peak current, distortion target, and thermal rise. Use the manufacturer reference circuit to reproduce supply decoupling and component values before scaling to higher output power.

Do not treat TAS5010IPFB as a conventional analog audio amplifier or as a self-contained speaker driver. It is a digital audio PWM processor that requires compatible digital sources, correct clocking, and an external power stage. Confirm the interface format, supported sample rate, clock configuration, and channel mapping from the manufacturer datasheet before connecting a source or assigning PCB signal names.

Treat the clock as the highest-priority digital signal and avoid routing it parallel to PWM outputs or speaker nets for extended distances. If the enclosure or PCB is electrically noisy, use a solid ground-plane strategy, controlled return paths, and localized filtering at the interface. Validate the finished design for channel alignment, click artifacts, and data errors before production release.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Compliance declarations are not stated in the available product listings. Confirm RoHS, REACH, halogen-free, and conflict-minerals status from the current manufacturer product documentation before qualification.

관련 검색

TAS5010IPFB datasheet TAS5010IPFB pinout TAS5010IPFB datasheet pdf TAS5010IPFB equivalent TAS5010IPFB replacement TAS5010IPFB cross reference TAS5010IPFB price TAS5010IPFB stock Texas Instruments TAS5010IPFB TAS5010IPFB 48-TQFP TAS5010IPFB digital audio PWM processor TAS5010IPFB vs TAS5010IPFBRG4 TAS5010IPFB 96 dB dynamic range TAS5010IPFB application circuit TAS5010IPFB schematic

관련 부품 & 용어

Texas Instruments TAS5010IPFB TAS5010IPFBRG4 TAS5010IPFBG4 TAS5010PFBR TAS5001IPFB TDA7430 digital audio PWM processor true-digital audio amplifier audio signal processor class-D amplifier PWM modulation digital audio interface dynamic range total harmonic distortion plus noise THD+N 48-TQFP package TQFP package family surface-mount package active loudspeaker powered speaker sound bar speaker output filter digital signal processing
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기