Texas Instruments

TAS5261DKD - 315W Mono Class D Amplifier | Texas Instruments

MPN: TAS5261DKD ✓ 啟用中
10.8 V to 13.2 V Vdss 36-pin HSSOP Package
MOQ: 1 |

TAS5261DKD 概覽

The Texas Instruments TAS5261DKD is a 315 W mono bridge-tied-load Class D digital amplifier power stage packaged in a 36-pin HSSOP. It is designed to drive 4- to 8-ohm speakers with low harmonic distortion, and its digital input architecture requires a simple passive demodulation filter to produce high-quality, high-efficiency audio amplification.

A Class D amplifier is a switching audio power stage whose output switches between the supply rails to amplify a pulse-width-modulated signal. After passive low-pass demodulation, this approach can provide high output power with lower power loss than a conventional linear audio amplifier. The TAS5261DKD belongs to the digital amplifier power-stage hierarchy, where an external input-processing stage generates the required modulation signal and the integrated power stage supplies current to the speaker load.

The TAS5261DKD provides one mono amplification channel, supports 4- to 8-ohm speakers, and is identified as a 315 W mono BTL digital amplifier power stage. The manufacturer documentation also describes the device as a 400 W mono Class D amplifier, while the product-page description identifies a 315 W configuration. Its listed operating supply range is 10.8 V to 13.2 V. Digital inputs, short-circuit protection, and thermal protection are listed among the device features.

The implementation uses a passive demodulation filter between the switching output and the speaker rather than an analog audio input stage. This architecture supports efficient amplification at relatively high output power, but the filter must be selected and laid out correctly because its response determines the recovered audio bandwidth, attenuation of carrier-related artifacts, and speaker-load stability.

Typical uses include powered speakers, subwoofer amplifiers, professional audio equipment, consumer audio systems, and other mono loudspeaker applications operating from a 12 V-class supply. A bridge-tied-load configuration uses both output terminals to drive the speaker differentially, so the speaker remains connected between the two outputs rather than from one output to ground.

PCB design should prioritize short power-stage connections, adequate thermal copper, a continuous supply path, careful grounding, and a stable reference return. The passive demodulation network should be placed close to the power-stage output, and its component values must follow the manufacturer reference design. Adequate copper area is important because Class D output current and supply transients can create losses, voltage drops, and EMI coupling even when the amplifier operates efficiently.

This page combines the identified electrical ratings, package characteristics, application guidance, and manufacturer documentation links for engineering evaluation. It also distinguishes verified product facts from unspecified details so designers can consult the pin-description table, reference schematic, thermal guidance, and power calculations before committing a TAS5261DKD design to production.

直接替換替代品,適用於 TAS5261DKD — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: TAS5261DKD (相同外形與佔位) — 差異在於 Input Type, Output Configuration, Package, Protection Features, Supply Voltage Range.

Texas Instruments
Input Type: Analog (differential/single-ended)
Output Configuration: BTL / PBTL
Package: 32-pin HTSSOP (DAD) with exposed thermal pad
比較對象 TAS5261DKD →

TPA3116D2DADR

✅ 直接替換
Texas Instruments
📦 HTQFP-36 PowerPAD
Class-D (filter-free) · 2 (Stereo) · 2 x 50 W into 4 ohm (BTL) · 100 W into 2 ohm (PBTL) · 4.5 V to 26 V · Analog (differential/single-ended) · BTL / PBTL · AD modulation with AM avoidance

✗ 缺貨

$2.2 / 單位

查看資料表 →

TPA3116D2RH

✅ 直接替換 ⚠️ 規格未經驗證
📦 HTQFP-36 PowerPAD
Same die and HTQPF-36 land pattern as TPA3116D2 with small-reel packing; 2 x 50 W stereo output versus 315 W mono (-83% per configured channel)

📋 參考替代品(不在目錄中)

TPA3156D2

✅ 直接替換 ⚠️ 規格未經驗證
📦 HTQFP-36 PowerPAD
Same TI HTQFP-36 PowerPAD package and digital Class D input stage, but 2 x 50 W stereo output and lower recommended bus voltage than the 315 W mono TAS5261DKD

📋 參考替代品(不在目錄中)

TAS5261DKD 最大額定值與電氣特性

Product Type Mono Class D digital amplifier power stage
Manufacturer Texas Instruments
Number of Audio Channels 1 channel
輸出配置 Mono bridge-tied-load (BTL)
Rated Output Power 315 W
Manufacturer Datasheet Header Output Rating 400 W
Recommended Speaker Impedance 4 ohm to 8 ohm
Supply Voltage Range 10.8 V to 13.2 V
Input Type Digital input
封裝 36-pin HSSOP
Package Pin Count 36 pins
Package Code HSSOP
Package Shape Rectangular
Terminal Form Gull wing
安裝類型 Surface mount
Temperature Grade Commercial
Output Demodulation Passive demodulation filter
Protection Features Short-circuit protection and thermal protection

TAS5261DKD rectangular 腳位配置指南

TAS5261DKD(rectangular 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

TAS5261DKD 的 rectangular 封裝腳位圖

無詳細腳位定義資料: TAS5261DKD.

請參閱 資料表 以查看完整腳位配置。

典型應用

TAS5261DKD 適用於 6 應用s: Powered Subwoofer, Powered Speaker, Professional Audio Speaker, Consumer Audio Amplifier, Portable Battery Audio System, Compact Sound Reinforcement.

🎧

Powered Subwoofer

The TAS5261DKD fits a high-power 12 V-class subwoofer because its 315 W mono Class D output can drive a 4- to 8-ohm speaker from a 10.8 V to 13.2 V supply. The digital drive architecture supports efficient power delivery, while the passive demodulation network recovers the audio waveform at the speaker. Correct filter selection, continuous speaker loading, and thermal design remain essential for clean low-frequency playback.

🔊

Powered Speaker

The TAS5261DKD can serve as the power-amplifier section of an active loudspeaker where high mono output power is required. Its bridge-tied-load topology drives the speaker differentially, avoiding the need for a conventional analog output stage. The 36-pin HSSOP layout requires careful routing of the digital input, power rails, ground return, output network, and thermal copper to sustain the stated mono power class.

🎵

Professional Audio Speaker

A professional monitor, utility speaker, or compact sound-system cabinet can use the TAS5261DKD as a high-efficiency mono power stage. The 315 W designation and 4- to 8-ohm load range suit designs requiring substantial continuous output from a 12 V-class supply. A low-pass or crossover network, where required, should operate within the digital input chain so the power stage receives its intended signal.

📱

Consumer Audio Amplifier

The TAS5261DKD can be integrated into a consumer loudspeaker product that needs efficient mono amplification without a conventional linear output stage. Its digital input accepts the processed audio signal, and the passive demodulation filter reconstructs the analog waveform before it reaches the 4- to 8-ohm load. Product-level EMI, vibration, and thermal testing should account for the switching nature of the power stage.

🔋

Portable Battery Audio System

A portable sound system operating from a nominal 12 V battery can use the TAS5261DKD when its 10.8 V to 13.2 V operating range matches the available bus. The Class D architecture can provide strong output efficiency, which helps reduce power loss, but battery regulation still determines whether full output remains available as voltage changes. Speaker protection and a controlled power-down sequence should also be designed around the amplifier.

🏭

Compact Sound Reinforcement

The TAS5261DKD is suitable for compact monoblock sound-reinforcement equipment that prioritizes output power and amplifier efficiency. One device provides a mono bridge-tied-load channel for a 4- to 8-ohm speaker, with the exact output level governed by supply and thermal conditions. Designers should use the manufacturer application circuit as the baseline for the demodulation filter, grounding, heat spreading, and protection components.

What is the TAS5261DKD?
The TAS5261DKD is a Texas Instruments 315 W mono Class D digital amplifier power stage in a 36-pin HSSOP package. It is designed to drive 4- to 8-ohm speakers through a bridge-tied-load output. According to the manufacturer datasheet, the device uses digital inputs and requires a passive demodulation filter to recover the amplified audio signal.
How many output channels does the TAS5261DKD have?
The TAS5261DKD has one mono Class D output channel. Its bridge-tied-load configuration is intended for high-power loudspeaker drive from a 10.8 V to 13.2 V supply. The manufacturer datasheet identifies the device as a 315 W mono BTL power stage and states that it supports 4- to 8-ohm speakers.
What speakers can the TAS5261DKD drive?
The TAS5261DKD is designed to drive 4-ohm to 8-ohm speakers. According to the manufacturer datasheet, the bridge-tied-load output supplies differential current to the speaker connected between the two output terminals. The exact continuous and peak power ratings must be checked against the associated supply voltage, cooling conditions, and the manufacturer power table.
What supply voltage does the TAS5261DKD require?
The TAS5261DKD operates from a 10.8 V to 13.2 V supply, making it suitable for 12 V-class power systems. The manufacturer datasheet lists short-circuit and thermal protection among its features. Because the device is a high-current switching power stage, supply wiring, bypass capacitance, grounding, and thermal management must follow the reference layout.
Does the TAS5261DKD require a passive demodulation filter?
Yes, the TAS5261DKD requires a passive demodulation filter between its Class D switching output and the speaker. According to the manufacturer datasheet, this simple filter recovers high-quality audio from the digital power-stage waveform while supporting high-efficiency amplification. Its component values and placement should follow the manufacturer reference design.
Where can I download the TAS5261DKD datasheet PDF?
The TAS5261DKD datasheet PDF is available through the manufacturer-document links listed on this page. The document provides the definitive pin descriptions, application schematic, electrical characteristics, and recommended passive-network values. Use the Texas Instruments datasheet for the 36-pin HSSOP pin assignments rather than assigning PCB nets from a generic amplifier diagram.
Where can I find the TAS5261DKD pinout?
The TAS5261DKD pinout is documented in the pin-description table of the manufacturer datasheet. The device is packaged as a 36-pin HSSOP, so every PCB net should be assigned from the numbered package drawing, including power, ground, digital input, output, and exposed thermal connections if applicable. Do not infer missing pin functions from another TAS5261 package.
What are the key specifications of TAS5261DKD that engineers should know?
The TAS5261DKD is a 315 W mono Class D digital amplifier power stage with a 10.8 V to 13.2 V supply range, digital input, and support for 4- to 8-ohm speakers. It uses a 36-pin HSSOP package and a passive demodulation filter. According to the manufacturer datasheet, short-circuit and thermal protection are included.
TAS5261DKD vs TPA3116D2 — which is better for a mono speaker?
The TAS5261DKD is the more directly documented choice when the original design specifies a 315 W mono Class D stage with a 36-pin HSSOP footprint and a 10.8 V to 13.2 V supply. A TPA3116D2 is a different amplifier architecture and package, so it cannot be assumed to be pin-compatible. Choose it only after comparing its input, power, thermal, and layout requirements.
When should I choose the TAS5261DKD over another mono Class D amplifier?
Choose the TAS5261DKD when the design requires a 315 W mono bridge-tied-load stage, digital drive, 4- to 8-ohm speaker support, and a 10.8 V to 13.2 V supply. It is particularly suitable when the PCB is designed around its 36-pin HSSOP footprint and manufacturer reference network. A different amplifier is preferable if its input format, package, thermal limits, or supply range better matches the product.
Is the TAS5261DKD suitable for a powered subwoofer?
The TAS5261DKD is suitable for a high-power mono subwoofer amplifier when the crossover can be placed ahead of the digital drive stage and the output network follows the manufacturer reference design. Its 315 W mono rating, 4- to 8-ohm load support, and 10.8 V to 13.2 V supply are appropriate for 12 V-class subwoofer systems.
What can replace the TAS5261DKD?
A verified drop-in replacement for the TAS5261DKD could not be established from the available manufacturer and cross-reference information. The TAS5261DKDG4 appears in a direct comparison listing, but its package suffix and exact pin compatibility were not established. For PCB reuse, use a replacement only after verifying its pin map, exposed-pad connection, electrical limits, and output-filter requirements.
Is the TAS5261DKD the same as TAS5261DKDG4?
The TAS5261DKD and TAS5261DKDG4 are distinct ordering codes, and the available comparison listing does not establish that every package and pin detail is identical. They may differ in delivery or packing configuration rather than electrical function. Verify the orderable drawing and mechanical data before treating TAS5261DKDG4 as a drop-in replacement.
Where can I buy the TAS5261DKD and check the current lead time?
Use the Request a Quote form on this page to request TAS5261DKD availability, current lead time, and an order quote for the exact MPN. Quote the complete part number TAS5261DKD because ordering suffixes can identify a different package or delivery format. The form is the appropriate channel for a current commercial commitment and schedule.
What is the current price of the TAS5261DKD?
The current TAS5261DKD price should be requested through the Request a Quote form on this page. A quotation can be matched to the exact MPN, required quantity, and order format, which avoids ambiguity between device variants or package suffixes. The structured price panel and quote workflow provide the current commercial response.
Is the TAS5261DKD currently in stock and what is its lead time?
Current TAS5261DKD inventory and lead time should be confirmed through the Request a Quote form on this page. Include the required quantity, target ship date, and any required tube, tape-and-reel, or other order format. The exact MPN TAS5261DKD should appear on the request so the supply response matches the intended 36-pin HSSOP device.
What PCB layout practices are important for the TAS5261DKD?
The TAS5261DKD layout should minimize loop area in the Class D power stage, provide low-impedance supply connections, and include the manufacturer-recommended bypass and passive demodulation networks. The output filter should be placed close to the amplifier pins, while power and ground planes must handle the available current without excessive voltage drop. Follow the manufacturer reference layout for exposed-pad, thermal, and EMI requirements.

工程參考資料,適用於 TAS5261DKD — 比較、設計指引及合規資訊。

選型指南

Choose the TAS5261DKD when the product needs a dedicated 315 W mono Class D stage driving a 4- to 8-ohm speaker from a 10.8 V to 13.2 V supply. It is a strong fit for powered subwoofers, active speakers, and compact monoblock amplifiers because its digital input, bridge-tied-load output, and passive demodulation architecture support efficient high-power amplification. The design must follow the manufacturer reference circuit, especially for the demodulation filter, supply bypassing, thermal pad, and PCB layout. Do not select a nominally similar amplifier solely by wattage: TPA3116D2, LMC6484, and NCP38240 have different architectures, packages, or electrical functions and are not drop-in replacements. If exact PCB interchangeability is required, obtain a specifically qualified ordering code and validate its pinout and mechanical drawing before release.

與替代品比較

參數 本產品
Manufacturer Texas Instruments
Package 36-pin HSSOP
Product Type Mono Class D digital amplifier power stage
Output Configuration Mono bridge-tied-load (BTL)
Rated Output Power 315 W
Supply Voltage Range 10.8 V to 13.2 V
Recommended Speaker Impedance 4 ohm to 8 ohm
Input Type Digital input
Protection Short-circuit protection and thermal protection

主要差異化特點

  • Integrated high-power mono Class D stage (對比TPA3116D2)
  • Designed for 4- to 8-ohm speaker loads (對比NCP38240)
  • 12 V-class supply operation (對比LMC6484)

設計說明

Use the manufacturer reference layout as the starting point for the 36-pin HSSOP footprint. Keep the digital input route away from the Class D power outputs and demodulation components, use a low-impedance ground return, and place local bypass capacitance close to the supply pins. Confirm all exposed-pad and thermal-via connections against the package drawing before routing.

Treat the TAS5261DKD power path as a high-current switching system rather than a conventional analog amplifier output. Size traces, connectors, supply wiring, and copper planes for the worst-case load current and switching transients. Verify the 10.8 V to 13.2 V supply range at the amplifier pins so voltage drop does not move the actual operating condition outside the manufacturer limits.

The passive demodulation filter is electrically and electromagnetically significant. Follow the manufacturer-recommended component values and topology, and place the network close to the power-stage output to minimize high-current trace length. Keep the speaker-side return compact, maintain ground continuity, and validate the completed assembly for switching artifacts and radiated emissions.

Do not base thermal design on the nominal power label alone. Determine actual conduction and switching loss at the intended supply voltage, output level, and speaker impedance, then verify junction temperature with the package thermal data and the intended PCB copper area. Maintain airflow when the HSSOP is mounted in an enclosure and avoid adjacent heat sources that reduce its available cooling.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The identified product documentation lists a commercial temperature grade but does not establish the requested compliance attributes. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status against the current manufacturer product documentation before qualification.

相關搜尋

TAS5261DKD datasheet TAS5261DKD pinout TAS5261DKD datasheet pdf TAS5261DKD specifications TAS5261DKD equivalent TAS5261DKD replacement TAS5261DKD cross reference TAS5261DKD vs TPA3116D2 TAS5261DKD 315W mono amplifier TAS5261DKD Class D power stage TAS5261DKD HSSOP footprint TAS5261DKD subwoofer amplifier Texas Instruments TAS5261DKD TAS5261DKD price TAS5261DKD buy online

相關元件與詞彙

Texas Instruments TAS5261DKD TAS5261DKDG4 TPA3116D2 LMC6484 NCP38240 Class D amplifier digital amplifier power stage mono amplifier bridge-tied-load BTL passive demodulation filter digital input speaker impedance 4 ohm speaker 8 ohm speaker HSSOP-36 surface-mount package short-circuit protection thermal protection powered subwoofer powered speaker professional audio 12 V-class power supply
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情