TAS5261DKD - 315W Mono Class D Amplifier | Texas Instruments
MPN: TAS5261DKD ✓ فعالTAS5261DKD جائزہ
A Class D amplifier is a switching audio power stage whose output switches between the supply rails to amplify a pulse-width-modulated signal. After passive low-pass demodulation, this approach can provide high output power with lower power loss than a conventional linear audio amplifier. The TAS5261DKD belongs to the digital amplifier power-stage hierarchy, where an external input-processing stage generates the required modulation signal and the integrated power stage supplies current to the speaker load.
The TAS5261DKD provides one mono amplification channel, supports 4- to 8-ohm speakers, and is identified as a 315 W mono BTL digital amplifier power stage. The manufacturer documentation also describes the device as a 400 W mono Class D amplifier, while the product-page description identifies a 315 W configuration. Its listed operating supply range is 10.8 V to 13.2 V. Digital inputs, short-circuit protection, and thermal protection are listed among the device features.
The implementation uses a passive demodulation filter between the switching output and the speaker rather than an analog audio input stage. This architecture supports efficient amplification at relatively high output power, but the filter must be selected and laid out correctly because its response determines the recovered audio bandwidth, attenuation of carrier-related artifacts, and speaker-load stability.
Typical uses include powered speakers, subwoofer amplifiers, professional audio equipment, consumer audio systems, and other mono loudspeaker applications operating from a 12 V-class supply. A bridge-tied-load configuration uses both output terminals to drive the speaker differentially, so the speaker remains connected between the two outputs rather than from one output to ground.
PCB design should prioritize short power-stage connections, adequate thermal copper, a continuous supply path, careful grounding, and a stable reference return. The passive demodulation network should be placed close to the power-stage output, and its component values must follow the manufacturer reference design. Adequate copper area is important because Class D output current and supply transients can create losses, voltage drops, and EMI coupling even when the amplifier operates efficiently.
This page combines the identified electrical ratings, package characteristics, application guidance, and manufacturer documentation links for engineering evaluation. It also distinguishes verified product facts from unspecified details so designers can consult the pin-description table, reference schematic, thermal guidance, and power calculations before committing a TAS5261DKD design to production.
کے لیے ڈراپ اِن متبادل TAS5261DKD — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں TAS5261DKD (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Input Type, Output Configuration, Package, Protection Features, Supply Voltage Range.
TPA3116D2DADR
✅ ڈراپ-اِن✗ اسٹاک سے باہر
$2.2 / یونٹ
ڈیٹا شیٹ دیکھیں →TPA3116D2RH
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
TPA3156D2
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
TAS5261DKD زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | Mono Class D digital amplifier power stage |
| Manufacturer | Texas Instruments |
| Number of Audio Channels | 1 channel |
| آؤٹ پٹ کنفیگریشن | Mono bridge-tied-load (BTL) |
| Rated Output Power | 315 W |
| Manufacturer Datasheet Header Output Rating | 400 W |
| Recommended Speaker Impedance | 4 ohm to 8 ohm |
| Supply Voltage Range | 10.8 V to 13.2 V |
| Input Type | Digital input |
| پیکیج | 36-pin HSSOP |
| Package Pin Count | 36 pins |
| Package Code | HSSOP |
| Package Shape | Rectangular |
| Terminal Form | Gull wing |
| ماؤنٹنگ ٹائپ | Surface mount |
| Temperature Grade | Commercial |
| Output Demodulation | Passive demodulation filter |
| Protection Features | Short-circuit protection and thermal protection |
TAS5261DKD rectangular پن کنفیگریشن گائیڈ
TAS5261DKD (rectangular پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں TAS5261DKD.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
TAS5261DKD کے لیے موزوں ہے 6 ایپلیکیشنs: Powered Subwoofer, Powered Speaker, Professional Audio Speaker, Consumer Audio Amplifier, Portable Battery Audio System, Compact Sound Reinforcement.
Powered Subwoofer
The TAS5261DKD fits a high-power 12 V-class subwoofer because its 315 W mono Class D output can drive a 4- to 8-ohm speaker from a 10.8 V to 13.2 V supply. The digital drive architecture supports efficient power delivery, while the passive demodulation network recovers the audio waveform at the speaker. Correct filter selection, continuous speaker loading, and thermal design remain essential for clean low-frequency playback.
تجویز کردہ
Powered Speaker
The TAS5261DKD can serve as the power-amplifier section of an active loudspeaker where high mono output power is required. Its bridge-tied-load topology drives the speaker differentially, avoiding the need for a conventional analog output stage. The 36-pin HSSOP layout requires careful routing of the digital input, power rails, ground return, output network, and thermal copper to sustain the stated mono power class.
تجویز کردہ
Professional Audio Speaker
A professional monitor, utility speaker, or compact sound-system cabinet can use the TAS5261DKD as a high-efficiency mono power stage. The 315 W designation and 4- to 8-ohm load range suit designs requiring substantial continuous output from a 12 V-class supply. A low-pass or crossover network, where required, should operate within the digital input chain so the power stage receives its intended signal.
تجویز کردہ
Consumer Audio Amplifier
The TAS5261DKD can be integrated into a consumer loudspeaker product that needs efficient mono amplification without a conventional linear output stage. Its digital input accepts the processed audio signal, and the passive demodulation filter reconstructs the analog waveform before it reaches the 4- to 8-ohm load. Product-level EMI, vibration, and thermal testing should account for the switching nature of the power stage.
تجویز کردہ
Portable Battery Audio System
A portable sound system operating from a nominal 12 V battery can use the TAS5261DKD when its 10.8 V to 13.2 V operating range matches the available bus. The Class D architecture can provide strong output efficiency, which helps reduce power loss, but battery regulation still determines whether full output remains available as voltage changes. Speaker protection and a controlled power-down sequence should also be designed around the amplifier.
تجویز کردہ
Compact Sound Reinforcement
The TAS5261DKD is suitable for compact monoblock sound-reinforcement equipment that prioritizes output power and amplifier efficiency. One device provides a mono bridge-tied-load channel for a 4- to 8-ohm speaker, with the exact output level governed by supply and thermal conditions. Designers should use the manufacturer application circuit as the baseline for the demodulation filter, grounding, heat spreading, and protection components.
تجویز کردہ
کے لیے انجینئرنگ ریفرنس ڈیٹا TAS5261DKD — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ |
|---|---|
| Manufacturer | Texas Instruments |
| Package | 36-pin HSSOP |
| Product Type | Mono Class D digital amplifier power stage |
| Output Configuration | Mono bridge-tied-load (BTL) |
| Rated Output Power | 315 W |
| Supply Voltage Range | 10.8 V to 13.2 V |
| Recommended Speaker Impedance | 4 ohm to 8 ohm |
| Input Type | Digital input |
| Protection | Short-circuit protection and thermal protection |
اہم امتیازی خصوصیات
- Integrated high-power mono Class D stage (بمقابلہTPA3116D2)
- Designed for 4- to 8-ohm speaker loads (بمقابلہNCP38240)
- 12 V-class supply operation (بمقابلہLMC6484)
ڈیزائن نوٹس
Use the manufacturer reference layout as the starting point for the 36-pin HSSOP footprint. Keep the digital input route away from the Class D power outputs and demodulation components, use a low-impedance ground return, and place local bypass capacitance close to the supply pins. Confirm all exposed-pad and thermal-via connections against the package drawing before routing.
Treat the TAS5261DKD power path as a high-current switching system rather than a conventional analog amplifier output. Size traces, connectors, supply wiring, and copper planes for the worst-case load current and switching transients. Verify the 10.8 V to 13.2 V supply range at the amplifier pins so voltage drop does not move the actual operating condition outside the manufacturer limits.
The passive demodulation filter is electrically and electromagnetically significant. Follow the manufacturer-recommended component values and topology, and place the network close to the power-stage output to minimize high-current trace length. Keep the speaker-side return compact, maintain ground continuity, and validate the completed assembly for switching artifacts and radiated emissions.
Do not base thermal design on the nominal power label alone. Determine actual conduction and switching loss at the intended supply voltage, output level, and speaker impedance, then verify junction temperature with the package thermal data and the intended PCB copper area. Maintain airflow when the HSSOP is mounted in an enclosure and avoid adjacent heat sources that reduce its available cooling.
تعمیل کی معلومات
The identified product documentation lists a commercial temperature grade but does not establish the requested compliance attributes. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status against the current manufacturer product documentation before qualification.