TAS5261DKD - 315W Mono Class D Amplifier | Texas Instruments
부품 번호: TAS5261DKD ✓ 활성TAS5261DKD 개요
A Class D amplifier is a switching audio power stage whose output switches between the supply rails to amplify a pulse-width-modulated signal. After passive low-pass demodulation, this approach can provide high output power with lower power loss than a conventional linear audio amplifier. The TAS5261DKD belongs to the digital amplifier power-stage hierarchy, where an external input-processing stage generates the required modulation signal and the integrated power stage supplies current to the speaker load.
The TAS5261DKD provides one mono amplification channel, supports 4- to 8-ohm speakers, and is identified as a 315 W mono BTL digital amplifier power stage. The manufacturer documentation also describes the device as a 400 W mono Class D amplifier, while the product-page description identifies a 315 W configuration. Its listed operating supply range is 10.8 V to 13.2 V. Digital inputs, short-circuit protection, and thermal protection are listed among the device features.
The implementation uses a passive demodulation filter between the switching output and the speaker rather than an analog audio input stage. This architecture supports efficient amplification at relatively high output power, but the filter must be selected and laid out correctly because its response determines the recovered audio bandwidth, attenuation of carrier-related artifacts, and speaker-load stability.
Typical uses include powered speakers, subwoofer amplifiers, professional audio equipment, consumer audio systems, and other mono loudspeaker applications operating from a 12 V-class supply. A bridge-tied-load configuration uses both output terminals to drive the speaker differentially, so the speaker remains connected between the two outputs rather than from one output to ground.
PCB design should prioritize short power-stage connections, adequate thermal copper, a continuous supply path, careful grounding, and a stable reference return. The passive demodulation network should be placed close to the power-stage output, and its component values must follow the manufacturer reference design. Adequate copper area is important because Class D output current and supply transients can create losses, voltage drops, and EMI coupling even when the amplifier operates efficiently.
This page combines the identified electrical ratings, package characteristics, application guidance, and manufacturer documentation links for engineering evaluation. It also distinguishes verified product facts from unspecified details so designers can consult the pin-description table, reference schematic, thermal guidance, and power calculations before committing a TAS5261DKD design to production.
드롭인 대체품: TAS5261DKD — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: TAS5261DKD (동일 폼 팩터 및 풋프린트) — 차이점: Input Type, Output Configuration, Package, Protection Features, Supply Voltage Range.
TPA3116D2DADR
✅ 드롭인✗ 재고 없음
$2.2 / 개
데이터시트 보기 →TPA3116D2RH
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
TPA3156D2
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
TAS5261DKD 최대 정격 & 전기적 특성
| Product Type | Mono Class D digital amplifier power stage |
| Manufacturer | Texas Instruments |
| Number of Audio Channels | 1 channel |
| 출력 구성 | Mono bridge-tied-load (BTL) |
| Rated Output Power | 315 W |
| Manufacturer Datasheet Header Output Rating | 400 W |
| Recommended Speaker Impedance | 4 ohm to 8 ohm |
| Supply Voltage Range | 10.8 V to 13.2 V |
| Input Type | Digital input |
| 패키지 | 36-pin HSSOP |
| Package Pin Count | 36 pins |
| Package Code | HSSOP |
| Package Shape | Rectangular |
| Terminal Form | Gull wing |
| 실장 유형 | Surface mount |
| Temperature Grade | Commercial |
| Output Demodulation | Passive demodulation filter |
| Protection Features | Short-circuit protection and thermal protection |
TAS5261DKD rectangular 핀 구성 가이드
TAS5261DKD(rectangular 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: TAS5261DKD.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
TAS5261DKD 적합 용도: 6 애플리케이션s: Powered Subwoofer, Powered Speaker, Professional Audio Speaker, Consumer Audio Amplifier, Portable Battery Audio System, Compact Sound Reinforcement.
Powered Subwoofer
The TAS5261DKD fits a high-power 12 V-class subwoofer because its 315 W mono Class D output can drive a 4- to 8-ohm speaker from a 10.8 V to 13.2 V supply. The digital drive architecture supports efficient power delivery, while the passive demodulation network recovers the audio waveform at the speaker. Correct filter selection, continuous speaker loading, and thermal design remain essential for clean low-frequency playback.
추천
Powered Speaker
The TAS5261DKD can serve as the power-amplifier section of an active loudspeaker where high mono output power is required. Its bridge-tied-load topology drives the speaker differentially, avoiding the need for a conventional analog output stage. The 36-pin HSSOP layout requires careful routing of the digital input, power rails, ground return, output network, and thermal copper to sustain the stated mono power class.
추천
Professional Audio Speaker
A professional monitor, utility speaker, or compact sound-system cabinet can use the TAS5261DKD as a high-efficiency mono power stage. The 315 W designation and 4- to 8-ohm load range suit designs requiring substantial continuous output from a 12 V-class supply. A low-pass or crossover network, where required, should operate within the digital input chain so the power stage receives its intended signal.
추천
Consumer Audio Amplifier
The TAS5261DKD can be integrated into a consumer loudspeaker product that needs efficient mono amplification without a conventional linear output stage. Its digital input accepts the processed audio signal, and the passive demodulation filter reconstructs the analog waveform before it reaches the 4- to 8-ohm load. Product-level EMI, vibration, and thermal testing should account for the switching nature of the power stage.
추천
Portable Battery Audio System
A portable sound system operating from a nominal 12 V battery can use the TAS5261DKD when its 10.8 V to 13.2 V operating range matches the available bus. The Class D architecture can provide strong output efficiency, which helps reduce power loss, but battery regulation still determines whether full output remains available as voltage changes. Speaker protection and a controlled power-down sequence should also be designed around the amplifier.
추천
Compact Sound Reinforcement
The TAS5261DKD is suitable for compact monoblock sound-reinforcement equipment that prioritizes output power and amplifier efficiency. One device provides a mono bridge-tied-load channel for a 4- to 8-ohm speaker, with the exact output level governed by supply and thermal conditions. Designers should use the manufacturer application circuit as the baseline for the demodulation filter, grounding, heat spreading, and protection components.
추천
엔지니어링 참조 데이터: TAS5261DKD — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Manufacturer | Texas Instruments |
| Package | 36-pin HSSOP |
| Product Type | Mono Class D digital amplifier power stage |
| Output Configuration | Mono bridge-tied-load (BTL) |
| Rated Output Power | 315 W |
| Supply Voltage Range | 10.8 V to 13.2 V |
| Recommended Speaker Impedance | 4 ohm to 8 ohm |
| Input Type | Digital input |
| Protection | Short-circuit protection and thermal protection |
주요 차별점
- Integrated high-power mono Class D stage (vs TPA3116D2)
- Designed for 4- to 8-ohm speaker loads (vs NCP38240)
- 12 V-class supply operation (vs LMC6484)
설계 노트
Use the manufacturer reference layout as the starting point for the 36-pin HSSOP footprint. Keep the digital input route away from the Class D power outputs and demodulation components, use a low-impedance ground return, and place local bypass capacitance close to the supply pins. Confirm all exposed-pad and thermal-via connections against the package drawing before routing.
Treat the TAS5261DKD power path as a high-current switching system rather than a conventional analog amplifier output. Size traces, connectors, supply wiring, and copper planes for the worst-case load current and switching transients. Verify the 10.8 V to 13.2 V supply range at the amplifier pins so voltage drop does not move the actual operating condition outside the manufacturer limits.
The passive demodulation filter is electrically and electromagnetically significant. Follow the manufacturer-recommended component values and topology, and place the network close to the power-stage output to minimize high-current trace length. Keep the speaker-side return compact, maintain ground continuity, and validate the completed assembly for switching artifacts and radiated emissions.
Do not base thermal design on the nominal power label alone. Determine actual conduction and switching loss at the intended supply voltage, output level, and speaker impedance, then verify junction temperature with the package thermal data and the intended PCB copper area. Maintain airflow when the HSSOP is mounted in an enclosure and avoid adjacent heat sources that reduce its available cooling.
규정 준수 정보
The identified product documentation lists a commercial temperature grade but does not establish the requested compliance attributes. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status against the current manufacturer product documentation before qualification.