Texas Instruments

THS3092DDA - Dual 160MHz CFA | Texas Instruments | SOIC-8

MPN: THS3092DDA ✓ 啟用中
±5 V to ±15 V Vdss 8-pin HSOIC PowerPAD (DDA) Package
MOQ: 1 |

THS3092DDA 概覽

Texas Instruments THS3092DDA is a dual high-voltage, low-distortion current-feedback operational amplifier with 160 MHz bandwidth, 5700 V/µs slew rate, and ±5 V to ±15 V supply operation, packaged in an 8-pin HSOIC PowerPAD package. The device provides two amplifiers in one package and is designed for applications requiring large linear output signals.

A current-feedback operational amplifier, or CFA, is a voltage-amplifier architecture organized around a low-impedance inverting input and a feedback impedance that sets closed-loop gain. Unlike a voltage-feedback amplifier, a CFA maintains high bandwidth across a wide gain range and delivers high slew rate with minimal gain-bandwidth degradation. In the power-management hierarchy, the THS3092DDA belongs to the operational-amplifier and signal-conditioning IC family rather than the voltage-regulator category.

The principal performance features include 160 MHz bandwidth, 5700 V/µs slew rate, and total harmonic distortion as low as −66 dBc at 10 MHz. The wide ±5 V to ±15 V supply range supports bipolar operation with a maximum total supply span of 30 V. Its current-feedback architecture is particularly useful for driving capacitive and high-resistance loads while maintaining large voltage swings and good settling performance.

The two-amplifier configuration provides two independent channels in a compact 8-pin HSOIC PowerPAD package. The exposed thermal pad supports heat transfer into the PCB copper area, an important consideration because high-speed, high-swing operation can increase device dissipation. The manufacturer identifies the THS3092 family for high-voltage arbitrary-waveform driver applications, including line-driver and power-driver signal-conditioning stages.

Typical uses include waveform generation, communications line-interface amplification, video and test-equipment output stages, power MOSFET or power-FET gate-drive signal conditioning, and VDSL-related driver circuits. The ±15 V capability and 5700 V/µs slew rate make the amplifier appropriate when a clean, large-amplitude output must follow a high-speed input waveform.

PCB design should keep feedback traces short, provide a low-impedance ground return for the exposed pad, and place supply-decoupling capacitors close to the relevant pins. Current-feedback amplifiers require suitable feedback resistors for the intended gain and load; incorrect values can produce excessive peaking, oscillation, or poor settling. Confirm output-current and capacitive-load limits before finalizing a driver stage.

This product page combines the manufacturer’s device description with package details, engineering selection guidance, verified ordering information, and practical design considerations. It is intended to help engineers identify whether the THS3092DDA’s high-voltage, high-speed dual-amplifier capability matches their signal-chain requirements.

直接替換替代品,適用於 THS3092DDA — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: THS3092DDA (相同外形與佔位) — 差異在於 Package.

Texas Instruments
Package: 8-pin SOIC
比較對象 THS3092DDA →

THS3096DDA

✅ 直接替換 ⚠️ 規格未經驗證
📦 8-pin HSOIC PowerPAD (DDA)
Same DDA package family and high-voltage current-feedback positioning; shutdown and detailed electrical differences require final datasheet verification, with matched key ratings estimated at 90%

📋 參考替代品(不在目錄中)

THS3092DDA 最大額定值與電氣特性

Amplifier Type Dual current-feedback operational amplifier
Number of Channels 2 channels
Gain-Bandwidth Product 160 MHz
Slew Rate 5700 V/µs
Total Harmonic Distortion −66 dBc at 10 MHz
Supply Voltage Range ±5 V to ±15 V
Maximum Total Supply Span 30 V
封裝 8-pin HSOIC PowerPAD (DDA)
安裝類型 Surface mount

THS3092DDA 8-pin hsoic powerpad (dda) 腳位配置指南

THS3092DDA(8-pin hsoic powerpad (dda) 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

THS3092DDA 的 8-pin hsoic powerpad (dda) 封裝腳位圖

無詳細腳位定義資料: THS3092DDA.

請參閱 資料表 以查看完整腳位配置。

典型應用

THS3092DDA 適用於 6 應用s: High-Voltage Arbitrary Waveform Drivers, VDSL and Communications Line Drivers, Power MOSFET Gate-Drive Conditioning, Video and Instrumentation Output Stages, High-Speed Sensor Signal Conditioning, Industrial and Factory Control Interfaces.

📺

High-Voltage Arbitrary Waveform Drivers

The THS3092DDA fits waveform-driver stages that require large output voltage swings at high frequency. Its 160 MHz bandwidth, 5700 V/µs slew rate, and low distortion as low as −66 dBc at 10 MHz help preserve the shape of demanding output waveforms. The device can be placed at the final drive stage of an arbitrary-waveform generator, with the feedback network selected using the manufacturer’s recommended values. The ±5 V to ±15 V supply range supports bipolar drive requirements, while the exposed PowerPAD needs adequate PCB copper for heat removal.

🌐

VDSL and Communications Line Drivers

The THS3092DDA is suitable for communications line-drive signal conditioning where large, fast output transitions are required. A current-feedback amplifier provides high large-signal capability through its 5700 V/µs slew rate, while the 160 MHz bandwidth supports high-frequency channel content. With bipolar supplies up to ±15 V, the device offers the voltage headroom needed to drive downstream circuitry through an external line-driver stage. Feedback impedance, load capacitance, and output-current requirements must be checked against the datasheet before the amplifier is connected to the line interface.

⚡

Power MOSFET Gate-Drive Conditioning

The THS3092DDA can condition high-rate gate-drive commands for power MOSFETs and power FETs when the driver system requires a large, fast bipolar voltage swing. The 5700 V/µs slew rate supports rapid input transitions, and the 160 MHz bandwidth provides bandwidth for high-frequency gate-drive waveforms. The amplifier is normally used before a dedicated MOSFET driver because its output-current and capacitive-load limits must support the gate charge and wiring capacitance. Place it close to the driver input, minimize feedback-loop area, and use independent rail decoupling.

🔧

Video and Instrumentation Output Stages

The dual THS3092DDA can provide two high-speed output channels in video, laboratory, and test-instrumentation signal chains. Its 160 MHz bandwidth and 5700 V/µs slew rate are useful when driving terminated or capacitive loads and reproducing large-amplitude waveforms. The dual architecture saves board area compared with two separate single amplifiers, while the 8-pin HSOIC PowerPAD package provides a direct thermal path to the PCB. The exact gain-setting resistor and output-swing limits must follow the manufacturer’s application guidance for the chosen load.

🧩

High-Speed Sensor Signal Conditioning

The THS3092DDA can serve as a fast output stage in sensor signal-conditioning systems that need to drive longer cables or downstream instrumentation rather than operate as a low-noise precision input amplifier. Its large-signal bandwidth, 160 MHz bandwidth, and 5700 V/µs slew rate help retain signal amplitude through downstream stages. The dual-channel configuration can process complementary or separate channels. Because it is a current-feedback amplifier, impedance at the inverting input and feedback network must be controlled to achieve the intended bandwidth and stability.

🏭

Industrial and Factory Control Interfaces

The THS3092DDA is appropriate for industrial control interfaces that must amplify fast control signals into larger-amplitude drive levels. The ±5 V to ±15 V operating range supports industrial bipolar signal chains, while the 5700 V/µs slew rate preserves rapid transitions. Two amplifiers in one package allow compact implementation of complementary drive or dual-axis control outputs. Thermal design remains important when both channels operate continuously into demanding loads; connect the exposed pad to an adequate copper area and follow the package’s soldering and layout requirements.

推薦產品摘要

THS3092DDA Texas Instruments 用於: High-Voltage Arbitrary Waveform Drivers, VDSL and Communications Line Drivers, Power MOSFET Gate-Drive Conditioning, Video and Instrumentation Output Stages, High-Speed Sensor Signal Conditioning, Industrial and Factory Control Interfaces THS3096DDA Closely related high-voltage current-feedback family 用於: High-Voltage Arbitrary Waveform Drivers, VDSL and Communications Line Drivers, Power MOSFET Gate-Drive Conditioning, Video and Instrumentation Output Stages, High-Speed Sensor Signal Conditioning, Industrial and Factory Control Interfaces
What is the operating voltage of THS3092DDA?
The THS3092DDA operates from ±5 V to ±15 V, corresponding to a maximum total supply span of 30 V. According to the Texas Instruments THS3092 datasheet, the device uses a wide bipolar supply range intended for applications requiring large linear output signals. This range supports dual-rail signal chains as well as applications using lower bipolar rails when the circuit does not require the full ±15 V capability.
What are the key specifications of THS3092DDA that engineers should know?
The THS3092DDA combines two current-feedback amplifiers, 160 MHz bandwidth, a 5700 V/µs slew rate, and operation from ±5 V to ±15 V in an 8-pin HSOIC PowerPAD package. Texas Instruments also identifies total harmonic distortion as low as −66 dBc at 10 MHz. These figures position the device for high-voltage waveform and line-driver stages requiring large output swings, rapid transitions, and low distortion.
Where can I download the THS3092DDA datasheet PDF?
The official THS3092DDA datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ths3092.pdf. The manufacturer’s product page for THS3092 is https://www.ti.com/product/THS3092, while the exact DDA ordering information appears at https://www.ti.com/product/THS3092/part-details/THS3092DDA. Use the manufacturer PDF for the complete electrical characteristics, pin description, and application guidance.
Where can I find the THS3092DDA pinout?
The THS3092DDA pin assignment is documented in the pinout and pin-description tables of the Texas Instruments THS3092 datasheet. Download the manufacturer PDF from https://www.ti.com/lit/ds/symlink/ths3092.pdf and locate the package information for the DDA ordering option. The part uses an 8-pin HSOIC PowerPAD package, so include the exposed thermal pad in the PCB footprint and thermal design.
Is THS3092DDA suitable for high-voltage waveform driver applications?
Yes, the THS3092DDA is specifically positioned for high-voltage arbitrary-waveform driver applications. Its ±5 V to ±15 V supply range, 5700 V/µs slew rate, and 160 MHz bandwidth allow large, fast output transitions. Texas Instruments further highlights the device’s ability to drive high-resistance and high-capacitance loads while maintaining good settling performance, subject to the load and output-current limits in the datasheet.
What can replace THS3092DDA?
A drop-in replacement for THS3092DDA must use the same 8-pin HSOIC PowerPAD footprint and maintain pin-to-pin compatibility while preserving the ±5 V to ±15 V supply range, 160 MHz bandwidth, and 5700 V/µs slew-rate class. The THS3096DDA is the closest same-family option because it belongs to the high-voltage, low-distortion current-feedback amplifier family and is identified alongside THS3092 for high-voltage waveform driving. Verify its exact pinout and functional differences before substitution.
Is THS3092DDA the same as THS3092DDAR?
THS3092DDA and THS3092DDAR identify the same core THS3092 dual current-feedback amplifier, but DDAR is a reel-oriented ordering form of the DDA package rather than a materially different amplifier design. The electrical function, 8-pin HSOIC PowerPAD construction, 160 MHz bandwidth, and 5700 V/µs slew rate remain associated with the device family. For a production substitution, confirm the physical orientation, packing method, exposed-pad connection, and moisture-handling requirements against the manufacturer ordering information.
THS3092DDA vs THS3096DDA — which is better for waveform driving?
Choose THS3092DDA when the design needs the standard dual high-voltage, low-distortion current-feedback amplifier without requiring an additional shutdown function. The THS3096 is identified in the same manufacturer documentation as a closely related high-voltage current-feedback family used for waveform-driver designs. Compare enable or shutdown behavior, supply-current requirements, output-current capability, and the exact DDA pin assignments before selecting between them.
When should I choose THS3092DDA over a voltage-feedback operational amplifier?
Choose THS3092DDA when the signal chain benefits from a current-feedback amplifier’s large-signal behavior and wide usable bandwidth at higher closed-loop gains. The device provides 160 MHz bandwidth, 5700 V/µs slew rate, and low distortion for large output swings. A voltage-feedback amplifier may be preferable for simple low-gain precision signal conditioning, but the THS3092DDA is better aligned with high-speed, high-amplitude driver requirements.
What is the best Analog Devices equivalent for THS3092DDA?
The Analog Devices OP293 is a related high-speed operational-amplifier candidate, but it should not be treated as an automatic drop-in replacement for THS3092DDA. A true replacement must match the 8-pin HSOIC PowerPAD land pattern, exposed-pad arrangement, pin functions, supply range, output-current capability, and feedback-network requirements. Compare the OP293FSZ data against the THS3092 datasheet and conduct stability and load testing before approving any cross-brand substitution.
Where to buy THS3092DDA online?
Use the Request a Quote form on this page to request THS3092DDA availability, lead time, and a current quotation. The manufacturer identifies THS3092DDA in its official product and ordering pages, while the component is also cataloged by authorized supply channels. A valid procurement request should specify the exact DDA ordering code, quantity, shipment destination, and required delivery date.
What is the price of THS3092DDA?
Use the Request a Quote form on this page for the current THS3092DDA quotation. Pricing depends on quantity, order date, packaging, and market availability, so a static figure can become inaccurate quickly. Include the exact THS3092DDA MPN and requested quantities in the quote request to obtain a current commercial response without confusing it with a different reel or ordering suffix.
What is the lead time for THS3092DDA?
Request the current THS3092DDA lead time through the Request a Quote form on this page. Lead time depends on the requested quantity, scheduled delivery date, and factory availability. The manufacturer product page identifies the exact DDA ordering option, but a confirmed production allocation should be obtained for the quantity and date needed by the build.
Is THS3092DDA in stock?
Request a current THS3092DDA stock confirmation through the Request a Quote form on this page. Inventory at a distributor does not necessarily represent factory availability, and the quantity needed can change the procurement path. State the required order quantity, target shipment date, and permitted alternate date when submitting the request.
What design considerations apply to a THS3092DDA current-feedback amplifier?
Design the THS3092DDA around a short feedback path, an appropriate feedback resistor, and a stable output network. Current-feedback gain depends on impedance rather than only on a resistor ratio, so use the manufacturer’s recommended values for the intended gain and load. Decouple each supply rail close to the device, connect the exposed thermal pad to a properly designed copper area, and verify capacitive-load stability before increasing output amplitude.

工程參考資料,適用於 THS3092DDA — 比較、設計指引及合規資訊。

選型指南

Choose THS3092DDA when the design needs two high-speed current-feedback channels, large bipolar output swings, and a slew rate of 5700 V/µs. It is particularly appropriate for arbitrary-waveform outputs, communications line-driver signal conditioning, and high-speed drive stages. The THS3096DDA is the closest same-family option when its additional family-specific functionality is useful, but verify its enable, supply-current, and detailed dynamic-performance specifications before substitution. Cross-brand candidates such as OP293FSZ or SSM2135SZ should be treated as engineering comparisons rather than automatic replacements: the physical footprint, exposed-pad arrangement, output-current limit, feedback-network requirements, and capacitive-load stability must all be reconciled. If the application requires conventional precision voltage-feedback amplification at modest bandwidth, a voltage-feedback amplifier may be easier to optimize. For the THS3092DDA, plan the feedback network, decoupled supplies, thermal pad, and load stability before layout release.

與替代品比較

參數 本產品 THS3096DDA
Brand Texas Instruments Texas Instruments
Package 8-pin HSOIC PowerPAD (DDA) 8-pin HSOIC PowerPAD (DDA)
Amplifier Architecture Current feedback Current feedback
Channel Count 2 channels 2 channels
Supply Voltage Range ±5 V to ±15 V ±5 V to ±15 V
Primary Application High-voltage arbitrary-waveform and line driving High-voltage current-feedback waveform driving

主要差異化特點

  • High large-signal slew capability (對比OP293FSZ-REEL7)
  • Wide bipolar operating range (對比OP293FSZ-REEL7)
  • Integrated dual amplifier and exposed thermal pad (對比SSM2135SZ-REEL7)

設計說明

Route the inverting input and feedback resistor directly between the amplifier and the feedback component, with minimal loop area and no test pads or unnecessary copper in the feedback path. Current-feedback amplifiers respond to feedback impedance, so even a small parasitic capacitance or inductance can alter bandwidth, peaking, and settling. Keep the feedback network close to the relevant pins and provide a low-impedance return from the exposed thermal pad to the circuit ground plane.

Place the positive and negative supply-decoupling capacitors close to their corresponding pins and keep each return path short. Because the THS3092DDA supports a total supply span of 30 V, verify rail polarity and absolute maximum limits during power-up. A controlled sequence and adequate bypass capacitance help prevent output transients during rail changes; use the manufacturer’s recommended network when the output must remain inactive during startup.

Treat the 8-pin HSOIC PowerPad as both an electrical connection and a thermal path. Connect the exposed pad to a continuous copper area with multiple thermal-via connections and maintain the package’s land-pattern requirements. Estimated: operation near ±15 V can create substantial dissipation when both channels deliver large output swings, so calculate worst-case channel output power and confirm that the PCB copper area can maintain the required junction-temperature margin.

Do not select feedback resistance solely from the intended closed-loop voltage gain. Current-feedback amplifiers require the manufacturer’s recommended feedback impedance for the target gain, output amplitude, and load. Increasing resistance excessively may reduce bandwidth or increase noise, while an excessively low value may increase output-current demand. Also verify capacitive-load stability and avoid driving loads beyond the datasheet output-current and slew-rate limits.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The manufacturer product family is identified, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified in the cited product text. AEC-Q100 is not applicable because THS3092DDA is not presented as an automotive-qualified device.

相關搜尋

THS3092DDA THS3092DDA datasheet THS3092DDA datasheet pdf THS3092DDA pinout THS3092DDA schematic THS3092DDA equivalent THS3092DDA replacement THS3092DDA cross reference THS3092DDA vs THS3096DDA THS3092DDA HSOIC PowerPAD THS3092DDA application circuit THS3092DDA price Texas Instruments THS3092DDA THS3092 160MHz 5700V/us amplifier

相關元件與詞彙

Texas Instruments THS3092DDA THS3092 THS3096DDA OP293FSZ-REEL7 SSM2135SZ-REEL7 LT1492CS8#TRPBF current-feedback operational amplifier CFA dual operational amplifier high-voltage operational amplifier signal-conditioning IC semiconductor 160 MHz bandwidth 5700 V/µs slew rate −66 dBc total harmonic distortion at 10 MHz ±5 V to ±15 V supply 8-pin HSOIC PowerPAD PowerPAD exposed thermal pad surface-mount package arbitrary-waveform driver VDSL line driver power MOSFET gate drive current-feedback feedback network
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情