Texas Instruments

THS8135PHP - 10-Bit Triple 240-MSPS Video DAC | TI

MPN: THS8135PHP ✓ 啟用中
3.3 V Vdss 48-lead HTQFP Package
MOQ: 1 |

THS8135PHP 概覽

The Texas Instruments THS8135PHP is a triple 10-bit video digital-to-analog converter optimized for video and graphics applications, with a maximum sampling rate of 240 MSPS in a 48-lead HTQFP package measuring 7 mm by 7 mm. It operates from a 3.3 V analog supply and a 1.8 V digital supply, separating sensitive analog signaling from lower-voltage digital control and data inputs.

A DAC is a data converter that translates digital codes into proportional analog voltages or currents. Video DACs belong to the broader ADC/DAC and data-converter IC hierarchy, where they sit between parallel digital pixel data and analog signals used by display or video-processing circuitry. The THS8135PHP combines three converters with circuitry for bi-level or tri-level synchronization and blanking-level generation.

The principal features of this device are its three independent 10-bit conversion channels, 240 MSPS performance, parallel digital interface, and dedicated analog and digital supply rails. Each converter resolves the video signal into 10-bit steps. The parallel interface supports direct connection to video data sources without requiring a serial interface or a separate high-speed communication protocol. The package also provides a consolidated implementation for three color channels rather than requiring three separate DAC packages.

The architecture is tailored to conventional component and graphics video systems. ITU-R BT.601-compatible full-scale output is identified for this device, making its output scaling suitable for standard-definition digital-video workflows. Bi-level and tri-level sync generation can produce the blanking levels required when converting active digital video into analog composite video. The 3.3 V analog rail and 1.8 V digital rail support partitioned supply planning, although both rails and the interface still require careful decoupling.

Typical applications include SD and other video graphics systems, test and measurement video generation, digital signage, display-processing boards, and industrial imaging panels. The device is particularly useful when three synchronized analog outputs are required and the source interface already provides parallel pixel data. Its 240 MSPS ceiling provides substantial timing margin for common progressive video rates.

PCB design should keep analog and digital return currents separated, place supply capacitors close to their corresponding pins, and route the parallel data bus with matched-length practices where timing margin is limited. The 48-lead HTQFP also requires careful thermal design because sustained high update rates can increase package dissipation. Use the manufacturer's pin-description table when assigning every power, data, clock, sync, and output connection.

This page combines the device's principal conversion specifications, application guidance, package details, and engineering-focused replacement considerations. It also organizes sourcing information and drop-in comparison points into a format intended to accelerate schematic review, footprint verification, and prototype planning.

直接替換替代品,適用於 THS8135PHP — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: THS8135PHP (相同外形與佔位) — 差異在於 Maximum Sampling Rate.

Texas Instruments
Maximum Sampling Rate: 180 MSPS
比較對象 THS8135PHP →

THS8136PHP

✅ 直接替換 ⚠️ 規格未經驗證
Texas Instruments
📦 48-lead HTQFP (7 mm x 7 mm)
Triple 10-bit video digital-to-analog converter · 3 channels · 10 bits per channel · 180 MSPS · 3.3 V · 1.8 V · 0.015 us · Parallel

聯絡詢價

查看資料表 →

THS8137PHP

✅ 直接替換 ⚠️ 規格未經驗證
📦 48-lead HTQFP (7 mm x 7 mm)
Sampling rate increases from 240 MSPS to 330 MSPS, a 37.5% increase; verify sync-generation differences in the manufacturer documentation.

📋 參考替代品(不在目錄中)

THS8138PHP

✅ 直接替換 ⚠️ 規格未經驗證
📦 48-lead HTQFP (7 mm x 7 mm)
Sampling rate increases from 240 MSPS to 330 MSPS, a 37.5% increase; feature and sync differences must be checked before substitution.

📋 參考替代品(不在目錄中)

THS8139PHP

✅ 直接替換 ⚠️ 規格未經驗證
📦 48-lead HTQFP (7 mm x 7 mm)
Sampling rate increases from 240 MSPS to 330 MSPS, a 37.5% increase; verify output and synchronization functions before substitution.

📋 參考替代品(不在目錄中)

THS8135PHPG4

✅ 直接替換
📦 48-lead HTQFP (7 mm x 7 mm)
Same 240 MSPS conversion rate and 48-lead HTQFP package; the G4 order suffix identifies the catalog variant.

📋 參考替代品(不在目錄中)

THS8135PHP 最大額定值與電氣特性

Product Type Triple video digital-to-analog converter
Number of DAC Channels 3 channels
解析度 10 bits per channel
Maximum Sampling Rate 240 MSPS
Analog Supply Voltage 3.3 V
Digital Supply Voltage 1.8 V
Digital Interface Parallel
Output Compliance ITU-R BT.601 full-scale range
Synchronization Support Bi-level and tri-level sync
Blanking Support Blanking-level generation
Package Type 48-lead HTQFP
Package Dimensions 7 mm x 7 mm
Terminal Count 48 terminals
Lead Form Gull-wing
Temperature Grade Commercial grade
安裝類型 Surface mount

THS8135PHP 7 mm x 7 mm 腳位配置指南

THS8135PHP(7 mm x 7 mm 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

THS8135PHP 的 7 mm x 7 mm 封裝腳位圖

無詳細腳位定義資料: THS8135PHP.

請參閱 資料表 以查看完整腳位配置。

典型應用

THS8135PHP 適用於 6 應用s: Standard-Definition Video Output, Digital Signage Player, Video Test and Measurement, Industrial Imaging Panel, Digital-to-Analog Video Conversion, Graphics and Display Processing.

📺

Standard-Definition Video Output

The THS8135PHP is appropriate for a standard-definition video board that receives parallel RGB or component-style digital codes and requires three synchronized analog outputs. Its three 10-bit conversion channels provide matching color-channel resolution, while the 240 MSPS maximum rate offers timing headroom over common SD pixel clocks. The device operates from a 3.3 V analog rail and a 1.8 V digital rail, allowing the interface logic and converter sections to use separate supply networks. ITU-R BT.601-compliant full-scale output supports conventional video scaling. The implementation should include channel-matched output networks, local supply decoupling, controlled reference return paths, and timing verification for the source video clock.

🖥️

Digital Signage Player

A digital-signage controller can use the THS8135PHP when it drives a video display through three parallel digital color channels. The 10-bit-per-channel converter supports smoother analog gradient reproduction than lower-resolution designs, while the 240 MSPS ceiling is well above many display timing rates. The parallel interface simplifies connection to video timing logic already present in the controller. Separate 3.3 V analog and 1.8 V digital supplies allow the board to isolate sensitive output circuitry from logic. Keep the digital bus away from the analog output region, reference a local ground strategy, and confirm that the controller can accommodate the converter's sync and blanking-generation functions.

🔧

Video Test and Measurement

The THS8135PHP is useful in video test equipment that must generate three analog color outputs from digital test patterns. Its 240 MSPS sampling capability provides substantial timing margin for common laboratory video formats, while three matched 10-bit converters simplify coordinated RGB generation. The parallel input bus can accept patterns from FPGA-based or digital video engines. Because test equipment often evaluates low-level distortion, keep analog and digital supplies independently decoupled, use symmetrical routing where practical, and establish a single quiet return point for the converter and output networks. Verify cable-driver bandwidth and termination because those external stages may limit final accuracy.

🏭

Industrial Imaging Panel

The THS8135PHP can support industrial imaging and panel-display systems requiring synchronized RGB output from a digital frame processor. The triple 10-bit architecture applies the same conversion resolution to all three color paths, and the 240 MSPS rate accommodates a broad range of progressive timing formats. Its 48-lead HTQFP package contains the converter, sync, and blanking functions in a compact 7 mm by 7 mm outline. The board should provide filtered analog and digital rails, minimize return-path discontinuities, and maintain consistent channel delays. Industrial temperature, EMC, and reliability requirements should be checked against the exact ordered device grade before production release.

🎥

Digital-to-Analog Video Conversion

The THS8135PHP is designed for designs that require direct parallel digital-video conversion into three analog channels. A 10-bit code maps to a discrete output step, while the shared device architecture provides consistent conversion across the color channels. Its 240 MSPS operating ceiling makes it suitable for common graphics and video rates without relying on a lower-speed conversion engine. Use the manufacturer's output-recommendation section to determine resistor values, loading, and termination. The 3.3 V analog and 1.8 V digital rails should each have local high-frequency bypass, and clock routing should be short to prevent data-to-clock skew from limiting the usable video bandwidth.

📱

Graphics and Display Processing

The THS8135PHP is well matched to graphics-processing boards that convert parallel pixel data into three synchronized analog video outputs. The 240 MSPS maximum rate supports common display modes with timing margin, and the 10-bit resolution applies consistently to each color channel. Integration of bi-level or tri-level synchronization and blanking-level generation simplifies implementation when the source does not already provide every required analog timing level. Layout quality remains critical: route the parallel bus away from output networks, provide a controlled analog ground region, and place decoupling capacitors directly at the supply terminals. Confirm connector impedance, cable losses, and amplifier bandwidth to ensure the converter is not the limiting stage.

What is the THS8135PHP?
The THS8135PHP is a triple 10-bit, 240-MSPS video DAC from Texas Instruments. According to the manufacturer product page, it contains three high-speed digital-to-analog converters plus bi-level or tri-level synchronization and blanking-level generation. It is packaged in a 48-lead HTQFP measuring 7 mm by 7 mm and is intended primarily for video and graphics output stages.
What are the key specifications of THS8135PHP that engineers should know?
The THS8135PHP provides three 10-bit DAC channels, a maximum sampling rate of 240 MSPS, a parallel interface, a 3.3 V analog supply, and a 1.8 V digital supply. Texas Instruments identifies the device as a general-purpose high-speed video DAC with ITU-R BT.601-compliant full-scale output and synchronization support for bi-level or tri-level signals. Its 48-lead HTQFP package measures 7 mm by 7 mm.
What supply voltages does THS8135PHP require?
The THS8135PHP requires a 3.3 V analog supply and a 1.8 V digital supply. According to the Texas Instruments product page, these are separate operating rails for the analog conversion section and digital logic or interface section. Keep the return-current paths and decoupling arrangements distinct so switching current in the digital section does not disturb the analog output nodes.
Where can I download the THS8135PHP datasheet PDF?
The official THS8135 technical documentation is available from the Texas Instruments product page at https://www.ti.com/product/THS8135. The manufacturer page links the device data sheet and supporting information. Use the manufacturer's pin-description and recommended-application sections to confirm the 48-lead assignments, supply connections, output implementation, and external component values before finalizing a PCB.
Where can I find the THS8135PHP pinout?
The THS8135PHP pin assignment is documented in the Texas Instruments THS8135 datasheet linked from https://www.ti.com/product/THS8135. The device uses a 48-lead HTQFP package, so verify all 48 terminal names against the manufacturer pin-description table. Do not infer analog-output, clock, synchronization, supply, or no-connect assignments from neighboring video DAC layouts.
Can THS8135PHP replace a generic triple video DAC?
The THS8135PHP can replace another triple video DAC only after confirming the footprint, pin assignments, supply voltages, output scaling, clocking, and interface timing. Its defined configuration is three 10-bit channels operating to 240 MSPS from a 3.3 V analog rail and a 1.8 V digital rail. A same-package device is not automatically a drop-in replacement if output voltage scaling or sync-generation assignments differ.
THS8135PHP vs THS8136PHP: which is better for high-speed video?
The THS8136PHP is the faster member of the same Texas Instruments family and is the stronger choice when a design requires more than the THS8135PHP's 240 MSPS ceiling. The THS8135PHP remains appropriate when 240 MSPS is sufficient and may simplify procurement when that operating point provides excess timing margin. Confirm the replacement's complete pinout, supply requirements, and sync behavior against the manufacturer documentation.
When should I choose THS8135PHP over THS8136PHP?
Choose the THS8135PHP when the required pixel rate is comfortably below 240 MSPS and the board does not need the greater throughput of the THS8136PHP. Its three 10-bit outputs, 3.3 V analog rail, and 1.8 V digital rail suit conventional parallel-video designs. Choose a faster family member only when the higher sampling rate or its associated timing characteristics create a measurable system benefit.
Is THS8135PHP suitable for digital signage and display processing?
Yes, the THS8135PHP is suitable for parallel digital-signage and display-processing boards because it combines three 10-bit converters with sync and blanking support. Its 240 MSPS maximum rate covers many standard video timing requirements with timing margin. The board still needs suitable video timing generation, output-network implementation, controlled ground-plane geometry, and synchronization of all three channels.
What can replace THS8135PHP?
The closest same-family replacements include the Texas Instruments THS8136PHP, THS8137PHP, THS8138PHP, and THS8139PHP, subject to their manufacturer-specified operating limits and pin assignments. These are 48-lead HTQFP family variants in the same packaging class, but speed and feature differences may affect timing margins. Verify every pin and electrical condition before treating a candidate as a drop-in replacement.
What is the best equivalent for THS8135PHP?
The best equivalent is the device that preserves the 48-lead HTQFP footprint, three 10-bit output channels, 3.3 V analog supply, 1.8 V digital supply, parallel interface, and required sync behavior. Texas Instruments THS8136PHP through THS8139PHP are the closest family candidates because they share the packaging class and converter architecture. A different manufacturer's ADV7123 is not a drop-in choice because it uses a different package and speed class.
Is THS8135PHP in stock and what is the lead time?
Stock and lead time should be confirmed for the exact THS8135PHP order code through the Request a Quote form on this page. Current inventory can vary by package quantity and regional supply conditions, so avoid relying on an unconfirmed stock statement. Provide the required quantity, target date, and acceptable packaging configuration when requesting a quotation.
How much does THS8135PHP cost?
The THS8135PHP should be quoted through the Request a Quote form on this page so the response reflects the exact quantity, package form, and current supply position. Pricing for this high-speed, 48-lead video DAC can vary with order volume and availability. The structured pricing panel should be used for any displayed commercial figure rather than relying on static text elsewhere.
Where can I buy THS8135PHP online?
Use the Request a Quote form on this page to request THS8135PHP availability, current lead time, and commercial terms for your required quantity. The request should identify the 48-lead HTQFP configuration and whether tape-and-reel, tray, or another permitted delivery format is required. This keeps the quotation tied to the exact orderable part rather than a related DAC package variant.
What layout practices are important for THS8135PHP?
The THS8135PHP layout should separate analog and digital return currents, place decoupling capacitors close to the relevant supply pins, and minimize copper resistance between the converter outputs and their external networks. Route the parallel data bus away from sensitive analog outputs and maintain suitable length matching where source timing requires it. The manufacturer's recommended layout and grounding guidance should take priority over generic advice.

工程參考資料,適用於 THS8135PHP — 比較、設計指引及合規資訊。

選型指南

Choose the THS8135PHP when a design needs three synchronized 10-bit analog video outputs, a parallel digital interface, and a maximum sampling rate of 240 MSPS. It is a practical choice for SD video, graphics, display processing, industrial imaging, and video test equipment because synchronization and blanking generation are integrated with the converters. The THS8136PHP, THS8137PHP, THS8138PHP, and THS8139PHP are sensible same-family alternatives when a higher-throughput member provides meaningful timing margin; verify their individual sync features, operating conditions, and exact pin descriptions. Do not select a differently packaged competitor solely because it also offers three 10-bit channels. For any substitution, verify the 48-lead footprint, analog and digital supply values, output scaling, clocking, synchronization, blanking behavior, and component tolerances against the manufacturer documentation.

與替代品比較

參數 本產品 THS8136PHP THS8137PHP THS8138PHP THS8139PHP
Package 48-lead HTQFP (7 mm x 7 mm) 48-lead HTQFP (7 mm x 7 mm) 48-lead HTQFP (7 mm x 7 mm) 48-lead HTQFP (7 mm x 7 mm) 48-lead HTQFP (7 mm x 7 mm)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments

主要差異化特點

  • Integrated triple-converter implementation (對比THS8136PHP)
  • Directly specified for 240 MSPS operation (對比THS8139PHP)
  • Separate analog and digital operating rails (對比THS8135PHPG4)

設計說明

Separate the analog and digital supply networks as closely as practical while maintaining a single, controlled ground reference at the converter. Place the required bypass capacitors adjacent to their respective supply terminals, and keep the parallel data traces away from the three analog output nodes. Use the manufacturer layout example as the baseline for return paths and component placement rather than relying on a generic high-speed DAC layout.

Treat the clock and parallel data interface as a coordinated timing group. Route the clock away from noisy switching nodes, check source and trace skew, and add matching only when required by the source timing specification. The THS8135PHP supports sampling rates up to 240 MSPS, but practical video bandwidth also depends on output networks, downstream amplifiers, cable loading, and the edge rate of the driving logic. Validate those interactions with measurements from the assembled board.

Build the 3.3 V analog and 1.8 V digital rails so switching and digital return current do not share the most sensitive converter paths. Check regulator noise, decoupling effectiveness, and startup sequencing at the system level. Place bulk and high-frequency capacitance according to the manufacturer's application circuit, and verify that the external output network does not create excessive load or induce code-dependent supply current that reduces available timing margin.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were identified for the exact THS8135PHP order code.

資料驗證日期: 2026-11-16 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

THS8135PHP datasheet THS8135PHP datasheet pdf THS8135PHP pinout THS8135PHP specifications THS8135PHP 48 pin THS8135PHP application circuit THS8135PHP vs THS8136PHP THS8135PHP drop-in replacement THS8135PHP equivalent Texas Instruments THS8135PHP THS8135PHP price THS8135PHP stock

相關元件與詞彙

Texas Instruments THS8135PHP THS8136PHP THS8137PHP THS8138PHP THS8139PHP THS8135PHPG4 video DAC digital-to-analog converter DAC data-converter IC ADC/DAC semiconductor parallel interface 10-bit resolution 240 MSPS 3.3 V analog supply 1.8 V digital supply ITU-R BT.601 bi-level sync tri-level sync blanking-level generation HTQFP-48 TQFP family surface-mount package video and graphics applications
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情