TLV2461ID - 6V 6.4MHz RRIO Op Amp | Texas Instruments
MPN: TLV2461ID ✓ 啟用中TLV2461ID 概覽
An operational amplifier is an analog IC that amplifies the voltage difference between its differential inputs. A rail-to-rail input/output, or RRIO, amplifier can accept input signals near the positive and negative supply rails and produce output swings close to those rails. This makes the TLV2461 useful in systems whose signal range would exceed the usable input or output range of a conventional amplifier tied closely to its supply rails.
The TLV2461ID combines a 6.4 MHz gain-bandwidth product with a low 0.075 µA quiescent current. According to the Texas Instruments product page, it is a single amplifier operating from 2.7 V to 6 V. Its input bias current of 1.3 nA is suited to high-impedance sources, while the listed 80 mA per-channel output current provides useful drive capability for typical analog stages. The amplifier also supports input and output operation across the supply rails.
With a reported instrumentation gain of 66 dB, the device can be used in instrumentation and measurement circuits requiring moderate signal amplification. Its 6.4 MHz bandwidth supports higher-frequency feedback networks than a low-frequency precision amplifier. The SOIC-8 package is suitable for conventional PCB assembly, and the single-amplifier configuration provides a straightforward implementation for buffer, amplifier, comparator-style, and general-purpose analog applications.
Typical applications include portable sensor conditioning, battery-operated measurement instruments, industrial low-power interfaces, audio and communication control paths, precision current-voltage conversion, and low-leakage photodiode front ends. The 1.3 nA input bias current is particularly relevant when the source impedance is high enough that amplifier input current materially changes the measured voltage.
Designers should verify signal amplitude, output swing, input common-mode range, noise, and stability at the intended gain. Decoupling capacitors should be placed close to the supply pins, while high-impedance input nodes require short traces and guarded layouts to reduce leakage and interference pickup.
This page combines the Texas Instruments device specifications with package guidance, application-oriented engineering notes, and same-package replacement options for engineers planning a TLV2461ID-based analog circuit.
直接替換替代品,適用於 TLV2461ID — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: TLV2461ID (相同外形與佔位) — 差異在於 Package, Amplifier Type, Input Common-Mode Range, Operating Temperature Range.
TLV2461CD
✅ 直接替換📋 參考替代品(不在目錄中)
TLV2461QDR
✅ 直接替換📋 參考替代品(不在目錄中)
TLV2460CDR
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
TLV2461ID 最大額定值與電氣特性
| Amplifier Type | Single operational amplifier |
| Number of Channels | 1 circuit |
| Rail-to-Rail Architecture | Input and output (RRIO) |
| Supply Voltage Range | 2.7 V to 6 V |
| Nominal Supply Voltage | 6 V |
| Gain-Bandwidth Product | 6.4 MHz |
| Input Bias Current | 1.3 nA |
| 靜態電流 | 0.075 µA per amplifier |
| Output Current per Channel | 80 mA |
| Instrumentation Gain | 66 dB |
| Output Swing Range | -1.35 V to +3 V at a 3 V supply |
| 封裝 | 8-pin SOIC |
| 腳位數 | 8 pins |
| 安裝類型 | Surface mount |
| Product Classification | Standard general-purpose amplifier |
TLV2461ID 腳位配置
| 腳位 1 | OUT — Amplifier output |
| 腳位 2 | V- — Negative supply connection |
| 腳位 3 | +IN — Noninverting input |
| 腳位 4 | -IN — Inverting input |
| 腳位 5 | NC — Not connected |
| 腳位 6 | NC — Not connected |
| 腳位 7 | V+ — Positive supply connection |
| 腳位 8 | NC — Not connected |
典型應用
TLV2461ID 適用於 6 應用s: Battery-Powered Sensor Conditioning, Precision Current-Voltage Conversion, Industrial Low-Power Instrumentation, Photodiode and High-Impedance Signal Detection, Portable Audio Signal Conditioning, Communication and Interface Buffers.
Battery-Powered Sensor Conditioning
The TLV2461ID fits low-energy sensor front ends that operate from a 2.7 V to 6 V supply. Its 0.075 µA quiescent current limits the amplifier's standing consumption, while the 1.3 nA input bias current reduces loading error when a high-impedance sensor or resistive divider is used. The device can amplify the sensor voltage and drive the input of a converter, comparator, or low-power controller. Its 6.4 MHz gain-bandwidth product also leaves bandwidth margin for modest filtering and gain stages. Care is still required around battery-powered boards because leakage through the sensor, PCB surfaces, and protection components can exceed the amplifier bias current.
推薦
Precision Current-Voltage Conversion
The TLV2461ID is suitable for transimpedance and general current-to-voltage stages where the input source must not be disturbed. Its 1.3 nA input bias current creates a small error term in high-impedance feedback networks, while the 6.4 MHz gain-bandwidth product supports feedback networks beyond very-low-frequency operation. An engineer can connect the amplifier as a transimpedance stage or precision noninverting amplifier and place a limiting resistor or diode strategy according to the signal source. Stable compensation and parasitic capacitance control remain critical, particularly when feedback resistance is high and the source is capacitive.
推薦
Industrial Low-Power Instrumentation
The TLV2461ID provides a compact single-amplifier solution for industrial instrumentation operating between 2.7 V and 6 V. Its 66 dB instrumentation gain and 1.3 nA input bias current support measurement chains that process weak sensor outputs without excessive loading. The SOIC-8 package is practical for conventional industrial PCB assembly, and the 6.4 MHz gain-bandwidth product supports faster feedback networks than an ultra-low-frequency precision amplifier. For field equipment, engineers should verify temperature limits, noise performance, creepage requirements, and protection-network leakage against the exact environmental requirements.
推薦
Photodiode and High-Impedance Signal Detection
The TLV2461ID can serve as the first active stage in a photodiode or high-impedance detector because its 1.3 nA input bias current is small relative to the currents produced by many optical sensors. Combined with a 6.4 MHz gain-bandwidth product, it supports transimpedance amplification where response speed must exceed that of a very-low-bandwidth precision device. The PCB should protect the input node from humidity, contamination, and surface leakage because those effects can dominate at the same current scale. Feedback resistance, input capacitance, stray capacitance, and amplifier stability should be evaluated together.
推薦
Portable Audio Signal Conditioning
The TLV2461ID can condition low-level audio or control signals in portable equipment operating from 2.7 V to 6 V. Its RRIO architecture supports input and output operation closer to the supply rails, which is valuable when the available signal range is a significant fraction of the supply voltage. The 80 mA per-channel output-current rating provides more drive capability than the very-low quiescent current might suggest, while the 6.4 MHz gain-bandwidth product supports moderate audio-frequency feedback networks. Output loading, distortion, noise, and stability should be checked at the selected gain and whether headroom is available for output-swing requirements.
推薦
Communication and Interface Buffers
The TLV2461ID is usable as a low-power buffer or interface amplifier in communication equipment where signals must be referenced to a 2.7 V to 6 V rail. Rail-to-rail input and output behavior provides useful signal range for low-voltage systems, while the 6.4 MHz gain-bandwidth product permits closed-loop configurations with appreciable bandwidth. A unity-gain buffer application requires confirmation that the capacitive and resistive load falls within the stable operating region. For longer traces or cable-driven nodes, input and output protection, impedance matching, and physical distance from switching circuitry are as important as the amplifier's nominal bandwidth.
推薦
推薦產品摘要
工程參考資料,適用於 TLV2461ID — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | TLV2461CD | TLV2461QDR | TLV2460CDR | TLV2462ID | TLV2464ID |
|---|---|---|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Special Feature | RRIO, no shutdown | RRIO, no shutdown | Automotive-qualified RRIO option | Shutdown-capable family variant | Shutdown-capable family variant | Higher-output-current family variant |
主要差異化特點
- Combines low quiescent current with higher bandwidth (對比TLV2460CDR)
- Automotive-qualified family option without changing the footprint (對比TLV2461CD)
- Low input bias current for high-impedance conditioning (對比TLV2464ID)
設計說明
Place the positive and negative supply bypass capacitors immediately beside pins 7 and 2, with short ground returns and minimal loop area. For a single 8-pin SOIC, the pin-2 and pin-7 locations can make short direct routes difficult, so route the capacitors before considering long interconnects. Keep the exposed input and feedback nodes away from switching nodes, inductors, and high-current return paths.
Do not assume that rail-to-rail operation provides unlimited output swing. The listed output range of approximately -1.35 V to +3 V at a 3 V supply is materially narrower than the physical rails. Check the required waveform amplitude and load current, and leave sufficient headroom for distortion and transient requirements. The same caution applies when interpreting RRIO input behavior at the limits of the supply range.
For high-impedance sensor inputs, use the lowest practical feedback resistance and keep the sensitive node physically small. The 1.3 nA input bias current is favorable, but PCB contamination, humidity, protection-device leakage, and adjacent high-impedance nets can still dominate the error. Guarding and a clean surface finish may be more valuable than further amplifier optimization when the source impedance is extremely high.
The 0.075 µA quiescent current makes battery operation attractive, but system-level leakage can dominate. Include divider currents, protection leakage, sensor impedance, and shutdown-state behavior in the power budget. Measure the complete analog front end at the intended supply voltage, temperature, and signal state rather than treating the amplifier's quiescent current as the total standby consumption.
合規資訊
The TLV2461QDR ordering option is described as automotive-qualified, but separate RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established for TLV2461ID.