TLV2461ID - 6V 6.4MHz RRIO Op Amp | Texas Instruments
MPN: TLV2461ID ✓ فعالTLV2461ID نمای کلی
An operational amplifier is an analog IC that amplifies the voltage difference between its differential inputs. A rail-to-rail input/output, or RRIO, amplifier can accept input signals near the positive and negative supply rails and produce output swings close to those rails. This makes the TLV2461 useful in systems whose signal range would exceed the usable input or output range of a conventional amplifier tied closely to its supply rails.
The TLV2461ID combines a 6.4 MHz gain-bandwidth product with a low 0.075 µA quiescent current. According to the Texas Instruments product page, it is a single amplifier operating from 2.7 V to 6 V. Its input bias current of 1.3 nA is suited to high-impedance sources, while the listed 80 mA per-channel output current provides useful drive capability for typical analog stages. The amplifier also supports input and output operation across the supply rails.
With a reported instrumentation gain of 66 dB, the device can be used in instrumentation and measurement circuits requiring moderate signal amplification. Its 6.4 MHz bandwidth supports higher-frequency feedback networks than a low-frequency precision amplifier. The SOIC-8 package is suitable for conventional PCB assembly, and the single-amplifier configuration provides a straightforward implementation for buffer, amplifier, comparator-style, and general-purpose analog applications.
Typical applications include portable sensor conditioning, battery-operated measurement instruments, industrial low-power interfaces, audio and communication control paths, precision current-voltage conversion, and low-leakage photodiode front ends. The 1.3 nA input bias current is particularly relevant when the source impedance is high enough that amplifier input current materially changes the measured voltage.
Designers should verify signal amplitude, output swing, input common-mode range, noise, and stability at the intended gain. Decoupling capacitors should be placed close to the supply pins, while high-impedance input nodes require short traces and guarded layouts to reduce leakage and interference pickup.
This page combines the Texas Instruments device specifications with package guidance, application-oriented engineering notes, and same-package replacement options for engineers planning a TLV2461ID-based analog circuit.
جایگزینهای drop-in برای TLV2461ID — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای TLV2461ID (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, Amplifier Type, Input Common-Mode Range, Operating Temperature Range.
TLV2461CD
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
TLV2461QDR
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
TLV2460CDR
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
TLV2462ID
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←TLV2464ID
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشدهبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←TLV2461ID حداکثر مقادیر مجاز و مشخصات الکتریکی
| Amplifier Type | Single operational amplifier |
| Number of Channels | 1 circuit |
| Rail-to-Rail Architecture | Input and output (RRIO) |
| Supply Voltage Range | 2.7 V to 6 V |
| Nominal Supply Voltage | 6 V |
| Gain-Bandwidth Product | 6.4 MHz |
| Input Bias Current | 1.3 nA |
| جریان سکون | 0.075 µA per amplifier |
| Output Current per Channel | 80 mA |
| Instrumentation Gain | 66 dB |
| Output Swing Range | -1.35 V to +3 V at a 3 V supply |
| بستهبندی | 8-pin SOIC |
| تعداد پایه | 8 pins |
| نوع نصب | Surface mount |
| Product Classification | Standard general-purpose amplifier |
پیکربندی پین TLV2461ID
| پین 1 | OUT — Amplifier output |
| پین 2 | V- — Negative supply connection |
| پین 3 | +IN — Noninverting input |
| پین 4 | -IN — Inverting input |
| پین 5 | NC — Not connected |
| پین 6 | NC — Not connected |
| پین 7 | V+ — Positive supply connection |
| پین 8 | NC — Not connected |
کاربردهای معمول
TLV2461ID مناسب است برای 6 کاربردs: Battery-Powered Sensor Conditioning, Precision Current-Voltage Conversion, Industrial Low-Power Instrumentation, Photodiode and High-Impedance Signal Detection, Portable Audio Signal Conditioning, Communication and Interface Buffers.
Battery-Powered Sensor Conditioning
The TLV2461ID fits low-energy sensor front ends that operate from a 2.7 V to 6 V supply. Its 0.075 µA quiescent current limits the amplifier's standing consumption, while the 1.3 nA input bias current reduces loading error when a high-impedance sensor or resistive divider is used. The device can amplify the sensor voltage and drive the input of a converter, comparator, or low-power controller. Its 6.4 MHz gain-bandwidth product also leaves bandwidth margin for modest filtering and gain stages. Care is still required around battery-powered boards because leakage through the sensor, PCB surfaces, and protection components can exceed the amplifier bias current.
پیشنهادی
Precision Current-Voltage Conversion
The TLV2461ID is suitable for transimpedance and general current-to-voltage stages where the input source must not be disturbed. Its 1.3 nA input bias current creates a small error term in high-impedance feedback networks, while the 6.4 MHz gain-bandwidth product supports feedback networks beyond very-low-frequency operation. An engineer can connect the amplifier as a transimpedance stage or precision noninverting amplifier and place a limiting resistor or diode strategy according to the signal source. Stable compensation and parasitic capacitance control remain critical, particularly when feedback resistance is high and the source is capacitive.
پیشنهادی
Industrial Low-Power Instrumentation
The TLV2461ID provides a compact single-amplifier solution for industrial instrumentation operating between 2.7 V and 6 V. Its 66 dB instrumentation gain and 1.3 nA input bias current support measurement chains that process weak sensor outputs without excessive loading. The SOIC-8 package is practical for conventional industrial PCB assembly, and the 6.4 MHz gain-bandwidth product supports faster feedback networks than an ultra-low-frequency precision amplifier. For field equipment, engineers should verify temperature limits, noise performance, creepage requirements, and protection-network leakage against the exact environmental requirements.
پیشنهادی
Photodiode and High-Impedance Signal Detection
The TLV2461ID can serve as the first active stage in a photodiode or high-impedance detector because its 1.3 nA input bias current is small relative to the currents produced by many optical sensors. Combined with a 6.4 MHz gain-bandwidth product, it supports transimpedance amplification where response speed must exceed that of a very-low-bandwidth precision device. The PCB should protect the input node from humidity, contamination, and surface leakage because those effects can dominate at the same current scale. Feedback resistance, input capacitance, stray capacitance, and amplifier stability should be evaluated together.
پیشنهادی
Portable Audio Signal Conditioning
The TLV2461ID can condition low-level audio or control signals in portable equipment operating from 2.7 V to 6 V. Its RRIO architecture supports input and output operation closer to the supply rails, which is valuable when the available signal range is a significant fraction of the supply voltage. The 80 mA per-channel output-current rating provides more drive capability than the very-low quiescent current might suggest, while the 6.4 MHz gain-bandwidth product supports moderate audio-frequency feedback networks. Output loading, distortion, noise, and stability should be checked at the selected gain and whether headroom is available for output-swing requirements.
پیشنهادی
Communication and Interface Buffers
The TLV2461ID is usable as a low-power buffer or interface amplifier in communication equipment where signals must be referenced to a 2.7 V to 6 V rail. Rail-to-rail input and output behavior provides useful signal range for low-voltage systems, while the 6.4 MHz gain-bandwidth product permits closed-loop configurations with appreciable bandwidth. A unity-gain buffer application requires confirmation that the capacitive and resistive load falls within the stable operating region. For longer traces or cable-driven nodes, input and output protection, impedance matching, and physical distance from switching circuitry are as important as the amplifier's nominal bandwidth.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای TLV2461ID — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | TLV2461CD | TLV2461QDR | TLV2460CDR | TLV2462ID | TLV2464ID |
|---|---|---|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Special Feature | RRIO, no shutdown | RRIO, no shutdown | Automotive-qualified RRIO option | Shutdown-capable family variant | Shutdown-capable family variant | Higher-output-current family variant |
تفاوتهای کلیدی
- Combines low quiescent current with higher bandwidth (در مقابلTLV2460CDR)
- Automotive-qualified family option without changing the footprint (در مقابلTLV2461CD)
- Low input bias current for high-impedance conditioning (در مقابلTLV2464ID)
یادداشتهای طراحی
Place the positive and negative supply bypass capacitors immediately beside pins 7 and 2, with short ground returns and minimal loop area. For a single 8-pin SOIC, the pin-2 and pin-7 locations can make short direct routes difficult, so route the capacitors before considering long interconnects. Keep the exposed input and feedback nodes away from switching nodes, inductors, and high-current return paths.
Do not assume that rail-to-rail operation provides unlimited output swing. The listed output range of approximately -1.35 V to +3 V at a 3 V supply is materially narrower than the physical rails. Check the required waveform amplitude and load current, and leave sufficient headroom for distortion and transient requirements. The same caution applies when interpreting RRIO input behavior at the limits of the supply range.
For high-impedance sensor inputs, use the lowest practical feedback resistance and keep the sensitive node physically small. The 1.3 nA input bias current is favorable, but PCB contamination, humidity, protection-device leakage, and adjacent high-impedance nets can still dominate the error. Guarding and a clean surface finish may be more valuable than further amplifier optimization when the source impedance is extremely high.
The 0.075 µA quiescent current makes battery operation attractive, but system-level leakage can dominate. Include divider currents, protection leakage, sensor impedance, and shutdown-state behavior in the power budget. Measure the complete analog front end at the intended supply voltage, temperature, and signal state rather than treating the amplifier's quiescent current as the total standby consumption.
اطلاعات انطباق
The TLV2461QDR ordering option is described as automotive-qualified, but separate RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established for TLV2461ID.