Texas Instruments

TLV2770CP - 5.1MHz R-R Op Amp | Texas Instruments

MPN: TLV2770CP ✓ 啟用中
2.7 V Vdss 8-pin PDIP Package
MOQ: 1 |

TLV2770CP 概覽

The Texas Instruments TLV2770CP is a single operational amplifier with a 5.5 V maximum supply voltage, 5.1 MHz gain-bandwidth product, 10.5 V/µs slew rate, and rail-to-rail output capability. It is packaged as an 8-pin PDIP and includes a shutdown function for low-power operation. These characteristics make it suitable for precision signal conditioning, data acquisition, instrumentation, and industrial control systems.

An operational amplifier is a voltage-controlled differential amplifier used to amplify, buffer, filter, or compare small signals. The TLV2770 belongs to the general-purpose amplifier family within the broader signal-chain and analog IC hierarchy. Its rail-to-rail output allows the output voltage to approach the supply rails under suitable load conditions, while its shutdown input provides a direct means of reducing supply current when the signal path is not required.

The 5.1 MHz gain-bandwidth product supports closed-loop operation over a broad range of signal frequencies, while the 10.5 V/µs slew rate improves large-signal response. A maximum supply voltage of 5.5 V positions the device for low-voltage analog systems. The shutdown function is valuable in portable and embedded equipment because it can disable the amplifier during inactive periods and reduce system power consumption.

The TLV2770CP is specified for operation from a 2.7 V minimum supply, with a family maximum of 5.5 V. The single-amplifier configuration and 8-pin PDIP format simplify prototyping where a through-hole package is preferred. Because bipolar-style signal paths can behave differently near the supply rails, system-level settling and output swing should be evaluated at the actual supply voltage, load, and signal amplitude used in the finished circuit.

Typical applications include low-level sensor conditioning, analog instrumentation, active filters, data-conversion front ends, buffer stages, and industrial process-control modules. The 5.1 MHz bandwidth is particularly useful when the circuit must process signals above the kilohertz range, while the 10.5 V/µs slew rate helps preserve fidelity on rapidly changing waveforms. Shutdown can be used to disable unused analog channels between measurement events.

When implementing the device, place input and output decoupling capacitors close to the corresponding pins and keep feedback traces short to minimize noise pickup and parasitic capacitance. Do not assume that the output can reach either supply rail under every load condition; verify the output-voltage limits and load capability in the manufacturer datasheet for the chosen voltage and temperature.

This page combines the device's electrical characteristics, package information, drop-in replacement guidance, application guidance, and engineering design notes. It also distinguishes true pin-compatible options from functionally similar amplifiers whose shutdown-pin arrangements differ, helping designers make package-compatible design decisions without assuming that similar specifications guarantee interchangeability.

直接替換替代品,適用於 TLV2770CP — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: TLV2770CP (相同外形與佔位) — 差異在於 Amplifier Type.

Texas Instruments
Amplifier Type: Single operational amplifier
比較對象 TLV2770CP →

TLV2770IP

✅ 直接替換
Texas Instruments
📦 8-pin PDIP
Single operational amplifier · 1 circuit · 2.7 V · 5.5 V · 5.1 MHz · 10.5 V/µs · Rail-to-rail output · Supported

聯絡詢價

查看資料表 →

TLV2770AIP

✅ 直接替換
📦 8-pin PDIP
Same 8-pin PDIP package and terminal arrangement with consistent functional characteristics; order-code qualification classification differs by 0% in the listed core electrical parameters.

📋 參考替代品(不在目錄中)

TLV2770CP 最大額定值與電氣特性

Amplifier Type Single operational amplifier with shutdown
Number of Channels 1 channel
Supply Voltage Minimum 2.7 V
Supply Voltage Maximum 5.5 V
Gain-Bandwidth Product 5.1 MHz
Slew Rate 10.5 V/µs
Output Topology Rail-to-rail output
工作溫度範圍 -40°C to +125°C
封裝 8-pin PDIP
安裝類型 Through-hole
Shutdown Control Yes
RoHS 狀態 Unknown
REACH Status Unknown

TLV2770CP 腳位配置

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
腳位 1 OUT — Amplifier output
腳位 2 V- — Negative supply connection
腳位 3 IN+ — Non-inverting input
腳位 4 IN- — Inverting input
腳位 5 V+ — Positive supply connection
腳位 6 NC — Not connected per datasheet
腳位 7 NC — Not connected per datasheet
腳位 8 SHDN — Shutdown control input

典型應用

TLV2770CP 適用於 6 應用s: Industrial Sensor Signal Conditioning, Precision Data Acquisition Front End, Active Analog Filters, Low-Voltage Process Control, Test and Measurement Buffer, Battery-Powered Portable Equipment.

🏭

Industrial Sensor Signal Conditioning

The TLV2770CP fits low-level industrial sensor front ends that require faster signal response than a conventional precision amplifier. Its 5.1 MHz gain-bandwidth product provides bandwidth for amplified sensor signals, while the 10.5 V/µs slew rate supports waveforms that change rapidly during transient events. Place the device in a non-inverting or differential conditioning stage with short feedback paths and local supply bypassing. The shutdown input can disable the channel between measurement cycles, reducing power demand when the sensor or converter is inactive.

📊

Precision Data Acquisition Front End

The TLV2770CP can drive the input stage of a data-acquisition system that benefits from a 5.1 MHz gain-bandwidth product and 10.5 V/µs slew rate. It is useful as a unity-gain buffer or moderate-gain amplifier ahead of an ADC, provided the required settling interval, noise, and output-range requirements are met. Keep the amplifier close to the ADC and use short traces to avoid adding parasitic capacitance between the analog node and converter input. Verify ADC acquisition timing against the amplifier's specified settling behavior.

📡

Active Analog Filters

The TLV2770CP is appropriate for active-filter stages operating from low-voltage analog rails where wider bandwidth and faster edge response improve signal throughput. Its 5.1 MHz gain-bandwidth product permits higher closed-loop gain than a precision, low-bandwidth amplifier, while the 10.5 V/µs slew rate helps preserve square-wave and transient content. Select resistor and capacitor values with the actual supply voltage and closed-loop gain in mind. Confirm output swing, stability, and component tolerances before extending filter order or increasing gain.

⚙️

Low-Voltage Process Control

The TLV2770CP can amplify control-loop signals in a 2.7 V to 5.5 V industrial or embedded control module. Its rail-to-rail output supports systems operating close to the available supply range, while the single-channel 8-pin PDIP package simplifies through-hole prototyping. The shutdown control is useful when a measurement channel is enabled only during a control cycle. Use the amplifier within its specified common-mode and output-swing limits, and design the surrounding filter network to prevent high-frequency switching noise from reaching the control node.

🖥️

Test and Measurement Buffer

The TLV2770CP is useful as an input or output buffer in compact test and measurement equipment that needs a 5.1 MHz bandwidth and 10.5 V/µs slew rate. Buffering can isolate the source from subsequent filter and conversion stages, while the shutdown function can reduce consumption when a measurement channel is idle. For high-accuracy measurements, verify input offset, bias-current, noise, and settling specifications at the required operating temperature. Maintain short, shielded analog traces and provide local bypass capacitance to reduce coupling from digital and switching circuitry.

📱

Battery-Powered Portable Equipment

The TLV2770CP suits portable analog equipment powered from a 2.7 V to 5.5 V rail because the family includes a shutdown function and operates from a low minimum supply voltage. The shutdown input can disable the amplifier during standby intervals, while the 5.1 MHz bandwidth handles signals beyond a basic precision-buffer application. Account for shutdown-state loading, input protection, and leakage from external resistors, all of which can dominate battery life. Evaluate the complete power budget and ensure that any disabled input remains within the device's input limits.

Where to buy TLV2770CP online?
Use the Request a Quote form on this page to request TLV2770CP availability, order quantities, and current commercial terms. The TLV2770CP is a Texas Instruments single-channel operational amplifier offered in an 8-pin PDIP package. Request a quote for the exact manufacturer part number and confirm the required tube, bulk, or other delivery configuration before releasing a purchase order.
What is the price of TLV2770CP?
Current TLV2770CP pricing is not shown as a fixed figure because commercial terms may change with quantity and supply conditions. Use the Request a Quote form on this page to obtain a current quotation for the exact TLV2770CP order code. The request should identify the desired quantity, delivery format, target date, and whether multiple production releases are required.
What is the lead time for TLV2770CP?
Request the current lead time through the Request a Quote form on this page. Lead time can depend on order quantity, package configuration, and current manufacturer allocation, so it should be confirmed for the intended production schedule. The TLV2770CP is identified as an active Texas Instruments product in an 8-pin PDIP package, but scheduling a specific build still requires a confirmed supply response.
Is TLV2770CP in stock?
Use the Request a Quote form on this page to check current TLV2770CP availability for the required quantity. Stock status is time-sensitive and may vary by package, order quantity, and shipment destination. Include a target delivery date in the request so the supplier response can distinguish immediate fulfillment from a scheduled production allocation.
What is the operating voltage of TLV2770CP?
The TLV2770CP operates from a 2.7 V minimum supply to a 5.5 V maximum supply. According to the Texas Instruments TLV2770 datasheet, it is a single 5.5 V operational amplifier with rail-to-rail output and shutdown. Designers should keep the actual supply within this range and include adequate margin for supply tolerance, transient variation, and the output-current demand of the selected operating condition.
What are the key specifications of TLV2770CP that engineers should know?
The principal TLV2770CP specifications are a 2.7 V minimum supply, 5.5 V maximum supply, 5.1 MHz gain-bandwidth product, and 10.5 V/µs slew rate. The Texas Instruments family description also identifies a single rail-to-rail output configuration with shutdown. The device is offered in an 8-pin PDIP package and is specified from -40°C to +125°C.
TLV2770CP vs TLV2770IP - which is better for industrial applications?
TLV2770CP and TLV2770IP are electrically and mechanically compatible 8-pin PDIP versions of the same TLV2770 family. The available cross-reference information describes consistent terminals, packages, and functional characteristics. Selection should therefore focus on the order-code temperature classification, procurement status, and any application-specific qualification rather than expecting a change in the basic 5.1 MHz bandwidth or 10.5 V/µs slew rate.
What is the difference between TLV2770CP and TLV2770IP?
The TLV2770CP and TLV2770IP use the same 8-pin PDIP package and are described as having consistent terminals, packages, and functional characteristics. Their order codes distinguish the manufacturer grade or qualification treatment rather than creating a different circuit topology. Both belong to the 2.7 V, 5.1 MHz, rail-to-rail-output TLV2770 family with a shutdown function and 10.5 V/µs slew rate.
When should I choose TLV2770CP over TLV2770IP?
Choose TLV2770CP when the purchase order specifically calls for that order code and the application does not require a different qualification class. TLV2770IP remains appropriate when its order-code grade is required by the customer or manufacturing process. Because the devices have consistent terminals, packages, and functional characteristics, the decision should be based on documented sourcing and qualification requirements rather than signal-processing performance.
Is TLV2770CP suitable for data acquisition and instrumentation?
Yes, the TLV2770CP is suitable for many data-acquisition and instrumentation front ends. Its 5.1 MHz gain-bandwidth product supports higher-frequency signal paths than low-bandwidth precision amplifiers, and its 10.5 V/µs slew rate improves response to rapidly changing waveforms. For 16-bit or high-resolution conversion systems, verify the settling-time, noise, offset, and common-mode specifications against the acquisition settling window before release.
What can replace TLV2770CP?
TLV2770IP is the clearest drop-in replacement identified for TLV2770CP because its terminals, 8-pin PDIP package, and functional characteristics are consistent with the original device. OPA726 and other amplifiers described as having similar pinouts should not be treated as direct replacements because their shutdown pins are arranged differently. Verify every pin function and supply condition before substituting any operational amplifier.
Can OPA726 replace TLV2770CP?
No, the OPA726 should not be assumed to be a drop-in replacement for TLV2770CP. Texas Instruments states that the OPA726 and TLV2770 have similar pinouts but use the shutdown pins differently. That difference prevents unqualified pin-to-pin substitution. Use the manufacturer pinout and the complete truth table for the shutdown function before considering a board-level redesign or functional replacement.
Where to download the TLV2770CP datasheet PDF?
Open the Texas Instruments TLV2770 product page and select the TLV2770CP part details or linked data sheet. The official part-details page is the preferred source because it connects the exact TLV2770CP order code, package information, ordering options, and revision-controlled documentation. Use the pin-description table in that manufacturer data sheet when assigning PCB signals and checking the shutdown function.
Where to find the TLV2770CP pinout?
The TLV2770CP pinout is documented in the Texas Instruments TLV2770 family data sheet under the pin-configuration information for the 8-pin PDIP package. Pin 1 is the output, pins 2 through 5 provide supply and input connections, and the shutdown and remaining no-connect positions must be assigned according to the package diagram. Use the pin-description table for PCB layout and do not infer shutdown behavior from the symbol alone.
How does the TLV2770 shutdown function affect circuit design?
The TLV2770CP includes a shutdown control that allows the amplifier to be disabled when it is not needed. Designers should drive the shutdown pin only from a logic level compatible with the device's supply and input limits, and should account for the state of the output during shutdown. The exact logic thresholds, timing, and output condition must be taken from the manufacturer data sheet.

工程參考資料,適用於 TLV2770CP — 比較、設計指引及合規資訊。

選型指南

Choose TLV2770CP when the design requires a single low-voltage operational amplifier with a 5.1 MHz gain-bandwidth product, 10.5 V/µs slew rate, rail-to-rail output, shutdown, and an 8-pin PDIP footprint. TLV2770IP is the preferred drop-in option when that order code is required by procurement or qualification rules, because its terminals, package, and functional characteristics are consistent. TLV2770AIP is another pin-compatible family option for designs whose documentation calls for that order code. Avoid treating OPA726 as a drop-in replacement: although its pinout is similar, the shutdown pins differ, so substitution requires a PCB change or deliberate functional redesign. For any alternative, verify the common-mode range, output swing, noise, offset, stability, and shutdown behavior under the actual supply, load, and temperature conditions.

與替代品比較

參數 本產品 TLV2770IP TLV2770AIP
Package 8-pin PDIP 8-pin PDIP 8-pin PDIP
Brand Texas Instruments Texas Instruments Texas Instruments
Number of Channels 1 channel 1 channel 1 channel
Supply Voltage Maximum 5.5 V 5.5 V 5.5 V
Gain-Bandwidth Product 5.1 MHz 5.1 MHz 5.1 MHz
Slew Rate 10.5 V/µs 10.5 V/µs 10.5 V/µs
Output Topology Rail-to-rail output Rail-to-rail output Rail-to-rail output
Shutdown Control Yes Yes Yes
Operating Temperature Range -40°C to +125°C -40°C to +125°C -40°C to +125°C
Pin and Functional Compatibility TLV2770CP reference configuration Consistent terminals, package, and functional characteristics Consistent terminals, package, and functional characteristics

主要差異化特點

  • High slew rate for a low-voltage single amplifier (對比TLV2770IP)
  • 5.1 MHz bandwidth supports higher-frequency analog signals (對比TLV2770AIP)
  • Pin-compatible shutdown-enabled configuration (對比OPA726)

設計說明

Place the bypass capacitor as close as practical to the V+ and V- pins, and route the supply return directly to the ground reference used by the signal source and load. Keep the OUT, IN+, and IN- traces short, particularly around high-gain nodes. Long feedback runs can pick up interference and add parasitic capacitance that changes the effective gain or stability behavior.

Do not substitute an amplifier merely because its footprint matches. The OPA726 and TLV2770 have similar pinouts but different shutdown-pin arrangements, while the OPA725 and TLV2771 have no shutdown function. A mechanical fit is therefore insufficient. Check pin names, logic thresholds, supply range, common-mode limits, output swing, and stability before approving a replacement.

Use the 5.1 MHz gain-bandwidth product and 10.5 V/µs slew rate as design limits, not as a guarantee that every signal can be reproduced at full amplitude. Check output settling, load capacitance, and required gain-bandwidth allocation for the selected feedback network. In ADC front ends, include amplifier settling time in the overall acquisition interval and keep the analog trace away from switching nodes.

Treat the shutdown input as a controlled logic signal and ensure that it never exceeds the absolute maximum input limits. When the amplifier is disabled, confirm whether external feedback or bias networks can pull the output away from its shutdown state. If battery life is important, include the amplifier supply current, external-network current, and shutdown leakage in the complete system power calculation.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for this order code. Confirm environmental and automotive qualification requirements with Texas Instruments before qualification release.

相關搜尋

TLV2770CP datasheet TLV2770CP datasheet pdf TLV2770CP pinout TLV2770CP equivalent TLV2770CP replacement TLV2770CP vs TLV2770IP TLV2770CP 5.1MHz TLV2770CP 10.5 V/us TLV2770CP PDIP-8 TLV2770CP application circuit Texas Instruments TLV2770CP TLV2770CP price TLV2770CP stock TLV2770 rail to rail op amp

相關元件與詞彙

Texas Instruments TLV2770CP TLV2770IP TLV2770AIP OPA726 operational amplifier general-purpose amplifier signal-conditioning amplifier analog IC semiconductor rail-to-rail output shutdown input gain-bandwidth product slew rate supply voltage 8-pin PDIP DIP package through-hole package industrial instrumentation data acquisition active filter process control battery-powered equipment low-voltage analog
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情