XA3S1500-4FGG676I - 1.5M Gate Automotive FPGA | AMD
MPN: XA3S1500-4FGG676I ✗ 停產XA3S1500-4FGG676I 概覽
A field-programmable gate array is a programmable semiconductor in which digital logic functions are configured after manufacture. A dedicated FPGA occupies the FPGA and CPLD category within programmable-logic semiconductors, while its internal resources include configurable logic blocks, block RAM, programmable input/output, and dedicated clock and power structures. This makes the XA3S1500 suitable when product-specific digital functions must be implemented in hardware without developing a custom ASIC.
Key resources include 1,500,000 system gates, 29,952 logic cells, 487 user I/O, 589,824 bits of RAM, and 3,328 logic-related structures identified for this device. The 676-pin FBGA provides a high-density interface for automotive electronics requiring substantial parallel connectivity. Its -4 grade designation and I suffix identify the relevant XA Spartan-3 ordering configuration, while the 90 nm process and 1.2 V core represent the technology generation of the family.
The Spartan-3 XA architecture places configurable logic and embedded memory within an FPGA fabric, allowing parallel datapaths, control logic, communication interfaces, and signal processing functions to be consolidated in one device. At 29,952 logic elements, the XA3S1500 offers substantially more capacity than small interface FPGAs while retaining the flexible in-system programming and field update characteristics associated with programmable logic.
Typical automotive uses include body and comfort modules, vehicle networking, sensor aggregation, infotainment interfaces, powertrain control, instrumentation, and centralized gateway logic. The 487 available user I/O makes the device particularly useful where multiple external buses, sensors, actuators, or communication transceivers must be coordinated. Automotive designs must also account for qualification, operating-temperature, EMC, and functional-safety requirements at the system level.
PCB implementation requires careful BGA layout, power-plane integrity, and decoupling because the 676-pin FBGA combines hundreds of signal connections with a 1.2 V core rail. Follow the manufacturer pinout and package-mechanical information when assigning balls, and validate high-speed interfaces, clock routing, configuration access, and power sequencing in the final PCB stack-up.
This page organizes the XA3S1500-4FGG676I’s programmable resources, package characteristics, verified alternatives, and practical selection considerations. It also distinguishes package-compatible orderable variants from replacements that may differ in temperature grade, speed grade, qualification, or device marking.
直接替換替代品,適用於 XA3S1500-4FGG676I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XA3S1500-4FGG676I (相同外形與佔位) — 差異在於 Package, Device Type, User I/O.
XC3S1500-4FGG676I
✅ 直接替換聯絡詢價
查看資料表 →XA3S1500-4FGG676C
✅ 直接替換📋 參考替代品(不在目錄中)
XA3S1500-4FG676I
✅ 直接替換📋 參考替代品(不在目錄中)
XC3S1500-4FG676C
✅ 直接替換聯絡詢價
查看資料表 →XC3S1500-5FGG676C
✅ 直接替換聯絡詢價
查看資料表 →XA3S1500-4FGG676I 最大額定值與電氣特性
| Device Type | Spartan-3 XA Field-Programmable Gate Array |
| System Gates | 1,500,000 gates |
| Logic Cells | 29,952 cells |
| User I/O | 487 I/O |
| Block RAM | 589,824 bits |
| Logic Blocks | 3,328 LABs/CLBs |
| Fabrication Technology | 90 nm |
| Core Supply Voltage | 1.2 V |
| 封裝 | 676-pin FBGA, 27 mm x 27 mm |
| 安裝類型 | Surface Mount |
| Product Family | XA Spartan-3 automotive FPGA family |
| Family Capacity Range | 50,000 to 1,500,000 system gates |
| Family Member Count | 5 devices |
| Programmable Logic Type | FPGA |
XA3S1500-4FGG676I 676-pin fbga, 27 mm x 27 mm 腳位配置指南
XA3S1500-4FGG676I(676-pin fbga, 27 mm x 27 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XA3S1500-4FGG676I.
請參閱 資料表 以查看完整腳位配置。
典型應用
XA3S1500-4FGG676I 適用於 6 應用s: Automotive Body Control, Vehicle Sensor Aggregation, Automotive Network Gateway, Powertrain Control, Infotainment and Instrumentation, Industrial Control and Automation.
Automotive Body Control
The XA3S1500-4FGG676I fits centralized automotive body-control logic because it combines 487 user I/O with 29,952 configurable logic cells in a 676-pin FBGA. It can coordinate switch inputs, actuator outputs, diagnostic signals, and body-network interfaces while implementing debounce, interlocks, timers, and state machines in parallel hardware. The 589,824 bits of block RAM support buffering, lookup tables, and diagnostic data handling. Designers should reserve I/O according to the manufacturer pin table, use the 1.2 V core rail with suitable decoupling, and validate signal integrity, EMC performance, and automotive qualification for the completed module.
推薦
Vehicle Sensor Aggregation
The XA3S1500-4FGG676I is suitable for vehicle sensor aggregation because its 487 user I/O can accept multiple digital and conditioned analog-system signals while 29,952 logic cells execute filtering, thresholding, fault detection, and data packaging. The 589,824-bit block RAM provides local storage for sampled channels, calibration tables, and diagnostic history without relying entirely on external memory. For a sensor-hub implementation, place the FPGA close enough to reduce trace length, define safe states for every I/O during configuration, and validate clock jitter, input thresholds, and fault containment according to vehicle-level requirements.
推薦
Automotive Network Gateway
The XA3S1500-4FGG676I can serve as a vehicle network gateway when several communication interfaces must be bridged, filtered, or routed through a common programmable-logic layer. Its large user-I/O count allows parallel interface connections, while the programmable fabric can support protocol conversion, frame checking, routing tables, and diagnostics without a network processor for every function. The 1.2 V core architecture also makes rail planning and decoupling central to the power-integrity design. Engineers should derive I/O standards from the selected external transceivers, validate timing margins across temperature, and confirm configuration safety during resets.
推薦
Powertrain Control
The XA3S1500-4FGG676I can support powertrain supervisory, diagnostic, and safety-control functions where deterministic parallel logic and extensive I/O are useful. The 29,952 logic cells allow redundant sensor checks, actuator command arbitration, timing supervision, and fault logging to execute concurrently, while 589,824 bits of block RAM can hold calibration and diagnostic structures. Because the family is positioned for automotive applications, the exact orderable suffix must still be checked against temperature and qualification requirements. Board-level validation should include transient immunity, ground bounce, power-supply tolerance, clock integrity, and fail-safe behavior when the FPGA is unconfigured.
推薦
Infotainment and Instrumentation
The XA3S1500-4FGG676I fits infotainment and instrumentation systems that combine display interfaces, keypad inputs, audio routing, vehicle status, and diagnostic communication. Its 487 user I/O provide substantial connectivity for parallel buses and display-control logic, while 29,952 logic cells and 589,824 bits of block RAM support data formatting, graphics timing, waveform processing, and buffered transactions. System architects should separate noisy automotive inputs from sensitive display or data interfaces, observe manufacturer I/O guidance, and validate timing margins after adding routing and connector loading. Configuration storage and update mechanisms should also be secured against unintended programming.
推薦
Industrial Control and Automation
The XA3S1500-4FGG676I can be evaluated for industrial automation when a project requires legacy Spartan-3 resources, extensive parallel I/O, and an established 676-FBGA footprint. Logic elements can implement motion sequencing, PLC-style state machines, counter and timer functions, while block RAM supports protocol tables, motion profiles, and diagnostic traces. The 1.2 V core requires a clean supply and low-impedance return path, and the large BGA demands careful escape routing around the device. Before adoption, verify the target device’s exact temperature, qualification, configuration method, and lifecycle position because the XA family is an older platform.
推薦
推薦產品摘要
工程參考資料,適用於 XA3S1500-4FGG676I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC3S1500-4FGG676I | XA3S1500-4FGG676C | XA3S1500-4FG676I | XC3S1500-4FG676C | XC3S1500-5FGG676C |
|---|---|---|---|---|---|---|
| Package | 676-pin FBGA | 676-pin FBGA | 676-pin FBGA | 676-pin FBGA | 676-pin FBGA | 676-pin FBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| FPGA Family | XA Spartan-3 | Spartan-3 | XA Spartan-3 | XA Spartan-3 | Spartan-3 | Spartan-3 |
| Temperature Designation | I suffix, industrial temperature range | I suffix, industrial temperature range | C suffix, commercial temperature range | I suffix, industrial temperature range | C suffix, commercial temperature range | C suffix, commercial temperature range |
| Speed Designation | -4 | -4 | -4 | -4 | -4 | -5 |
主要差異化特點
- Matches the XA Spartan-3 automotive-family designation (對比XC3S1500-4FGG676I)
- Industrial-temperature suffix retained for extended environmental use (對比XA3S1500-4FGG676C)
- Provides 487 user I/O for high-parallelism automotive systems (對比XC3S1500-5FGG676C)
- Large embedded-memory and logic capacity for consolidated control (對比XC3S1500-4FG676C)
設計說明
Treat the 676-pin FBGA as a high-density routing challenge. Follow the manufacturer package footprint and escape-routing recommendations exactly, including ball-pad dimensions, solder-mask geometry, via placement, and the exposed thermal or substrate requirements. Keep the 1.2 V core distribution plane continuous where possible and place local decoupling capacitors close to the relevant supply balls. PCB stack-up, return paths, and via transitions should be validated with the actual fabricator because uncontrolled inductance can impair the high-I/O device even when static voltage appears correct.
Design the supply network around core and I/O demand rather than a nominal 1.2 V value alone. Use separate filtering paths where practical for the core, auxiliary I/O supplies, and configuration circuitry, then join them at an appropriately designed power-distribution point. Account for startup inrush, configuration activity, simultaneous I/O transitions, and worst-case temperature. Validate the supply using the manufacturer’s recommended operating limits and load-transient measurements on the assembled board rather than relying on the regulator’s nominal output alone.
Preserve signal integrity across the large BGA interface by minimizing stub lengths and matching the topology of clock and high-speed data routes. Assign clock-capable pins and dedicated configuration pins according to the manufacturer pin-description tables; do not assume that mechanically similar FPGAs share the same function at every ball. Provide solid reference planes beneath signal layers, maintain adequate clearance for automotive transient requirements, and use the device-specific pin table when planning decouplers, test points, and programming access.
Do not substitute a package-compatible FPGA solely because all alternatives use a 676-pin FBGA outline. Verify the complete ball map, I/O standards, configuration interface, auxiliary supply requirements, temperature grade, and qualification for every proposed part. The I and C suffixes represent different environmental grades, while the -4 and -5 speed designations affect timing closure. After substitution, rerun synthesis, place-and-route timing, pin constraints, power estimation, and board-level signal-integrity verification.
合規資訊
The device is identified as an automotive Spartan-3 XA FPGA, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified.